Clarion RGB NTSC INSTALLATION MANUAL

RGBNTSC

RGBNTSC 08 2001

CONVERTER

DEALER

INSTALLATION

The RGBNTSC converter is used
when a composite (NTSC) screen is
to be used for large screen
Navigation applications.

Clarion Advanced Technology Corporation

20 Empire Drive, Lake Forest, CA 92630-2244 - USA

Monitor

This unit should be mounted under
the dash or somewhere near the front
screen. To hook up the converter,
connect the RGB cable from the back
of the main unit and the other end to
the converter. Use the RCA cables
provided with the monitor and
connect one end to the monitor and
the other end to the converter. Now
hook up the ACC power and ground
as shown in the schematic below.

The unit has ACC, power and ground
that must be connected. The yellow
power wire must be connected to 12V
main power, red is connected to ACC,
and the black ground wire must be
connected to a ground connection.

RGB Cable

RCA Cable

Power Cable

Part # YX-X01-M009

Red

Black

Yellow

RCA Cable

to Monitor

RGB Cable

Part # YX-X01-M008

RGB Cable