Owner’s manual & Installation manual
사용 설명 및 설치 설명서
R
R
All Rights Reserved. Copyright © 2002: Clarion Co., Ltd.
Printed in Japan/ 在曰本印刷/일본에서 인쇄하였음.
2002/12 (A·K)
QC-6810K
280-7947-00
Clarion Co., Ltd.
AM/FM DVD VIDEO / VIDEO CD / CD / MP3
PLAYER / CD CHANGER CONTROLLER WITH
7" LC DISPLAY
帶７英寸液晶顯示器調帶７英寸液晶顯示器調
帶７英寸液晶顯示器調帶７英寸液晶顯示器調
帶７英寸液晶顯示器調
幅幅
幅幅
幅
(AM)/ (AM)/
(AM)/ (AM)/
(AM)/
調調
調調
調
頻頻
頻頻
頻
(FM) (FM)
(FM) (FM)
(FM)
DVD VIDEO/VIDEO CD/CD/MP3DVD VIDEO/VIDEO CD/CD/MP3
DVD VIDEO/VIDEO CD/CD/MP3DVD VIDEO/VIDEO CD/CD/MP3
DVD VIDEO/VIDEO CD/CD/MP3
播放機播放機
播放機播放機
播放機
/ CD / CD
/ CD / CD
/ CD
換片機控制器換片機控制器
換片機控制器換片機控制器
換片機控制器
7인치 LC 디스플레이 화면의 AM/FM
DVD 비디오/비디오 CD/CD/MP3 플
레이어 / CD 체인저 컨트롤러
2 VRX935VD
Thank you for purchasing the Clarion VRX935VD.
∗ This owner’s manual is for the VRX935VD.
∗ Please read this owner’s manual in its entirety before operating this equipment.
∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment).
∗ Check the contents of the enclosed warranty card and keep it carefully with this manual.
∗ This manual includes the operating procedures of the CD changer, MD changer, DVD changer, TV
tuner, 5.1ch Surround Decoder. The CD changer, MD changer, TV tuner, 5.1ch Surround Decoder and
DVD Changer have their own manuals, but no explanations for operating them are described.
Contents
1. FEATURES ................................................................................................................... 2
2. PRECAUTIONS ............................................................................................................ 3
3. CONTROLS ................................................................................................................... 5
4. NOMENCLATURE ......................................................................................................... 6
5. DISPLAY ........................................................................................................................ 8
6. OUTLINE OF BUTTON AND TOUCHKEY OPERATION
WHEN THE DISPLAY IS OPEN .................................................................................. 10
7. REMOTE CONTROL ................................................................................................... 14
8. DCP .............................................................................................................................. 17
9. CAUTIONS ON HANDLING ........................................................................................ 18
10. DVD VIDEO SYSTEM .................................................................................................. 19
11. OPERATIONS.............................................................................................................. 21
Basic Operations ..........................................................................................................21
Radio Operations ......................................................................................................... 25
DVD Video Player Operations ...................................................................................... 28
VISUAL Operations ...................................................................................................... 43
CD/MD Changer Operations ........................................................................................ 46
DVD Changer Operations ............................................................................................ 50
TV Operations .............................................................................................................. 50
Other Functions ............................................................................................................ 53
5.1ch Surround Decoder Operations ........................................................................... 55
12. IN CASE OF DIFFICULTY ........................................................................................... 59
13. ERROR DISPLAYS...................................................................................................... 61
14. SPECIFICATIONS ....................................................................................................... 62
Installation and wire connection manual ........................................................................ 63
1. FEATURES
■ Fully-Motorized 7" Widescreen LCD
■ Touch Panel Control
■ DVD Video/CD-DA/MP3/Video CD Play
Capability
■ 6-Channel, 4Volt RCA Line Level
Output
■ Built-in 53W × 4 Amplifier
■
CeNET with Balanced Audio Line Transmission and Dynamic Noise Canceling
■ Multi Angle, Multi Story, Slow Motion
Capability
■ ID3 Tag Capability
■ CD TEXT Capable
■ CD-R/CD-RW Compatible
■ 5.1 Channel Decoder for DTS and
Dolby Digital Capability
■ Optical Digital Output
VRX935VD 217
■ 샘플 시스템 3
(LINE IN)D
N(LINE OUT)
본체
VRX935VD
(회색)
광 디지털 케이블
(DVH920 포함)
VISUAL 2 IN
VTR
CCA-389
튜너 앰프
RCA 케이블
(비주얼)
튜너 IN
CeNET
VISUAL 1 IN
TTX7501z
TTX7503z/
TTX7504z
(CeNET TV 튜너)
후면 뷰
모니터
RCA 케이블
(비주얼)
RCA 케이블
(비주얼)
DVH920
(5.1 채널 서라운드 디
코더) CeNET 모드 *
검은색
전면 스피커 후면 스피커
RCA 케이블
(SRK601 포함)
RCA 케이블(별도 판매)
RCA 케이블(비주얼)
(VCZ625 포함)
CeNET
(VCZ625 포함)
광 디지털 케이블
(별도 판매 DCA-
005/008)
SRK602
(센터 스피커)
SRV303
(파워 서브 우퍼)
VCZ625
(DVD 체인저)
CeNET 모드 *
* 모드 스위치를 CeNET
모드로 전환
(회색)
“(LINE IN)D”로
전환하고 선택하기
RCA 케이블
RCA 케이블
앰프
English
Owner’s manual
VRX935VD 38 VRX935VD VRX935VD 4
English
Owner’s manual
English
Owner’s manual
English
Owner’s manual
5. DISPLAY
The Color LCD Display and the Information Panel on the main unit show the following displays, providing information about the mode and functions operated.
Information Panel
1. When the inside of the car is very cold and
the player is used soon after switching on the
heater, moisture may form on the disc (DVD/
CD/MD) or the optical parts of the player and
proper playback may not be possible. If
moisture forms on the disc (DVD/CD/MD),
wipe it off with a soft cloth. If moisture forms
on the optical parts of the player, do not use
the player for about one hour. The condensation will disappear naturally allowing normal
operation.
2. Driving on extremely bumpy roads which
cause severe vibration may cause the sound
to skip.
3. This unit uses a precision mechanism. Even
in the event that trouble arises, never open
the case, disassemble the unit, or lubricate
the rotating parts.
4. TV broadcast reception
When receiving the TV broadcasts, the
strength of the signals changes since the car
is moving, so in some cases it may not be
possible to receive clear pictures.
• TV signals are strongly linear, so reception is
affected by buildings, mountains and other
obstacles.
• Such external factors such as electric train
lines, a high voltage lines, and signal devices
may disturb the picture or cause noise.
∗ If the reception is poor, switch to a station
with good reception.
2. PRECAUTIONS
WARNING
For your safety, the driver should not watch the TV or operate the controls while driving.
Please note that watching and operating the TV while driving are prohibited by law in
some countries. Also, while driving, keep the volume to a level at which external sounds
can be heard.
Handling Discs
Handling
• New discs may have some roughness around
the edges. If such discs are used, the player
may not work or the sound may skip. Use a
ball-point pen or the like to remove any roughness from the edge of the disc.
• Never stick labels on the surface of the disc or
mark the surface with a pencil or pen.
• Never play a disc with any cellophane tape or
other glue on it or with peeling off marks. If
you try to play such a disc, you may not be
able to get it back out of the DVD player or it
may damage the DVD player.
• Do not use discs that have large scratches,
are misshapen, cracked, etc. Use of such
discs may cause misoperation or damage.
• To remove a disc from its storage case, press
down on the center of the case and lift the
disc out, holding it carefully by the edges.
• Do not use commercially available disc protection sheets or discs equipped with stabilizers, etc. These may damage the disc or cause
breakdown of the internal mechanism.
Storage
• Do not expose discs to direct sunlight or any
heat source.
•
Do not expose discs to excess humidity or dust.
•
Do not expose discs to direct heat from heaters.
Cleaning
• To remove fingermarks and dust, use a soft
cloth and wipe in a straight line from the center of the disc to the circumference.
• Do not use any solvents, such as commercially available cleaners, anti-static spray, or
thinner to clean discs.
• After using special disc cleaner, let the disc
dry off well before playing it.
On Discs
• Exercise a good precaution when loading a
disc with the panel open.
• Never turn off the power and remove the unit
from the car with a disc loaded.
Ball-point pen
Roughness
Operation status indication
∗The frequency, play time,
clock, etc. are displayed.
Preset channel indication
Disc number indication
∗The disc numbers corresponding to the
discs in the DVD, CD or MD changer
light.
: Beat-EQ indication
: Stereo indication
: Loudness indication
: Disc indication
: Repeat indication
: Random indication
: Scan indication
: Manual indication
INFORMATION FOR USERS:.
CHANGES OR MODIFICATIONS TO THIS
PRODUCT NOT APPROVED BY THE MANUFACTURER WILL VOID THE WARRANTY.
Be sure to unfold and read the next page.
請務必打開并閱讀下一頁。
이 페이지를 펼친 채로 다음 페이지를 읽어 보십시오.
With the screen open, a driver may not see the
disc insertion slot. For your safety, insert a disc
with the screen closed.
CAUTION
No
VRX935VD 75 VRX935VD 6 VRX935VD
English
Owner’s manual
English
Owner’s manual
English
Owner’s manual
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.
注意﹕在閱讀每一章時，請務必打開本頁，并參照本頁的前視圖。
참고: 이 페이지를 펼쳐두고, 각 장을 읽을때 전면 그림을 참조하도록 하십시오.
Main unit / 主機 /
본체
With the Display closed /
顯示屏處于關合狀態
/
디스플레이가 닫혀져 있을때
With the Display open /
顯示屏處于打開狀態
/
디스플레이가 열려져 있을때
3.
CONTROLS / 控制部分 / 컨트롤
4. NOMENCLATURE
When the display open
[a], [d] button
• Use this button to tune to a station in the radio/TV mode.
• Use this button to select a track in the CD,
Video CD, MP3 and CD/MD changer mode.
• Use this button to select a chapter in the DVD
video and DVD changer mode.
[M.L] button
• The display panel can be switched to a composite screen to lock the monitor.
• Press and hold this button for about 1 second
or longer to turn off the monitor.
[TILT] button
• Use this button to adjust the angle of the liquid
crystal panel in 5 steps.
• Every time this button is pressed and held for
about 2 seconds or longer, the liquid crystal
panel moves forward/backward in 3 steps.
[s] button
•
Press this button to enter the play pause mode
in the DVD video mode and changer mode.
Press the button again to resume playback.
[A-M] button
• Shows the AUDIO MODE menu for tone adjustment, etc. Press and hold this button for 1
second or longer to switch the loudness on or
off (LOUD ON/OFF).
[ADJ] button
• Shows the ADJUST MODE menu to change
the settings.
• Press and hold this button for 1 second or
longer to show the DVD SETUP menu.
[KEY PAD] button
• Press to display the keys (KEY PAD) that correspond to play mode.
[MENU] button
• Press this button to show the DVD menu on
the screen in the DVD video and DVD
changer mode.
• Press this button to show the file selection
screen in the MP-3 mode.
• Press and hold this button for 1 second or
longer to show the DVD title screen.
[LIST] button
• Press this button to show the list of the preset
channel on the screen in the radio/TV mode.
• Press this button to show the disc list on the
screen in the CD/MD/DVD changer mode.
When the display closed
[VOL] button
• Use this button to increase/decrease the volume.
[DISP] button
• Use this button to switch the indications such
as play status on the information panel.
[OPEN] button
• Use this button to open/close the liquid crystal
panel.
• Press and hold this button for about 2 seconds or longer so that the liquid crystal panel
is positioned horizontally when the liquid crystal panel is open. Press the button again to return the panel to the original position. Even if
the button is not pressed, the panel returns to
the original position after about 10 seconds.
[RELEASE] button
• Use this button to remove the DCP from the
main unit.
[SENSOR]
• Remote control infrared sensor.
[ISR] button
• Use this button to enter the ISR (Instant station recall) standby mode.
[MUTE] button
• Use this button to mute the sound.
Names of Buttons
Note:
• Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold).
[DIRECT] button
• Use this button to select a preset channel in
the radio/TV mode.
• Use this button to select a disc in the changer
mode.
• Press and hold one of the [DIRECT] button for
2 seconds or longer to store the current station into preset memory.
[a], [d] button
• Use this button to tune to a station in the radio/TV mode.
• Use this button to select a track in the CD,
Video CD, MP3 and CD/MD changer mode.
• Use this button to select a chapter in the DVD
video and DVD changer mode.
[s] button
• Press this button to enter the play pause
mode in the DVD video mode and changer
mode. Press the button again to resume playback.
[BND] button
• Press this button to switch the receiving
bands for radio/TV mode, etc. Press and hold
this button for 1 second or longer to switch the
SEEK/MANUAL tuning modes.
• Use this button to move to the first track on a
disc in the DVD video mode.
• Use this button to switch to the next disc in
the changer mode.
• Use this button to select visual1 or 2 in the VISUAL mode.
[FUNC] button
• Press this button to turn on the power. Press
and hold this button for 1 second or longer to
turn off the power.
• Press this button to switch the modes such as
radio.
[Q] button
• Use this button to eject a disc.
[DISP] button
• Press and hold this button for 1 second or
longer to call the LCD background screen
setup menu.
• Press this button to show the information on
the screen in the TV, VISUAL, or DVD video
mode.
• Press and hold this button for 1 second or
longer to switch the display sizes while in the
screen where the TV, VISUAL, or DVD video
mode is suspended.
[
OPEN
]
[
VOL
]
[
DISP
]
[
RELEASE
]
[
SENSOR
]
[s]
[Q]
[
BAND
]
[
FUNC
]
[
DIRECT
] [
ISR
]
[
MUTE
]
[
TILT
]
[
M.L
]
[
]
[
A-M
]
[
ADJ
]
[
KEY PAD
]
[
LIST
]
[
MENU
]
[
DISP
]
VRX935VD 9
English
Owner’s manual
Color LCD Display
MANU
ST
LD
BEQ
Clock time
Mode name
MOTION/SPRITE
pattern display
: PROGRAM WEST COAST (user title)
•Radio/TV mode
: USER TITLE SHINE (user title)
•CD changer mode
: DISC TITLE SHINE (disc title)
: TRACK TITLE Time has come (track title)
•MD changer mode
: DISC TITLE SHINE (disc title)
: TRACK TITLE Time has come (track title)
: ARTIST Time has come (artist)
•CD TEXT in CD changer mode
•Radio mode : FM1 98.10MHz Pch 1(band/frequency/preset No.)
•DVD changer mode: D2 T02 C002 01:08:20
(disc No./title No./chapter No./ playback time)
•DVD video mode : T01 C003 00:08:20(title No./chapter No./playback time)
•Video CD mode : T01 00:01:18(track No./playback time)
•MP-3 mode : F001 T001 00:04:07(folderNo./track No./playback time)
•CD mode : TRACK 02 04 : 07(track No./playback time)
•CD/MD changer mode: D02 T02 00 : 45(disc No./track No./playback time)
•TV mode : TV1 28CH Pch 1(band/channel/preset No.)
•VISUAL mode : VISUAL 1 (band)
: Seek/Manual indication
: Stereo indication
: Loudness indication
: Beat-EQ indication
When the 5.1ch Surround Decoder (DVH920) is
connected, the program format of the digital input
signal (for example, “3/2+LFE”) is displayed.
When the 5.1ch Surround Decoder (DVH920) is
connected, the signal format of the digital input
signal (for example, “Dolby D”) is displayed.
10 VRX935VD
English
Owner’s manual
∗2
∗5
∗4
∗5
FUNCTION
DVD PLAYER
∗1
∗3
6.
OUTLINE OF BUTTON AND TOUCHKEY
OPERATION WHEN THE DISPLAY IS OPEN
Note:
• The background of some screens in the following
sections have been simplified to make it easier to
see the keys in each procedure.
∗1: The STANDARD screen indication in the ra-
dio mode
∗2: Press an operation button to switch the STAN-
DARD screen.
The operation button is [FUNC] button in the
description of operation per mode.
∗3: Touch the screen and the menu screen corre-
sponding to the play mode is displayed.
∗4: Touch an operation key to switch the menu
screen.
The operation key is [FUNCTION] key in the
description of operation per mode.
∗5: Touch the [RTN] key to return to the previous
screen.
∗6: Touch the [ ] key to go to the next menu.
∗7: Touch the [ ] key to return to the previous
menu.
∗8: This icon [ ] is displayed to indicate that the
button should be held down for 1 second or
longer.
VRX935VD 11
English
Owner’s manual
∗6
∗7
CLOCK
∗8
1
∗6
PARENTAL LEVEL
STOP
(ADJUST MODE menu) (DVD SETUP menu)
12 VRX935VD
English
Owner’s manual
∗9
DETAIL
BASS BOOST
EQ LEVEL
9
8
1
ENT
0
(KEY PAD)
(AUDIO MODE menu)
VRX935VD 13
English
Owner’s manual
1
∗10
ENT
∗11
∗8
SPRITE
WALL COLOR
Notes:
∗8: This icon [ ] is displayed to indicate that
the button should be held down for 1
second or longer.
∗9: This shows a KEY PAD selection example
in the radio mode when 98.10 MHz is
selected.
(MOTION/SPRITEmenu)
(DVD video menu)
∗10: Use this button during DVD, video CD and
MP-3 playback.
∗11: When the KEY PAD is difficult to view,
press the touch key on the right (left) side
of the screen to move it to the other side of
the screen.
14 VRX935VD
English
Owner’s manual
7. REMOTE CONTROL
[
CeNET
]
[
MUTE
]
[
VOLUME
]
[
P.TIME
]
[
BAND
]
[
FUNC
]
[
]
[
]
[
0-9
]
[
DISC SEL
]
[
SEARCH MODE
]
[
MENU
]
[
RTN
]
[
SET UP
]
[
TITLE
]
[
],[
]
[
],[
]
[
PBC
]
[
RDM
]
[
SLOW
]
[
ANGLE
]
[
SCAN
]
[
RPT
]
[
AUDIO
]
[
SUB TITLE
]
[
],[ ]
[
ENT
]
[
],[ ]
Signal transmitter
Operating range: 30˚ in all directions
Rear side
AA (SUM-3, IECR-6/1.5V)
Batteries
Rear cover
Remote control unit
Inserting the Batteries
1.Turn the remote control unit over, then slide the
rear cover in the direction of the arrow.
2.Insert the AA (SUM-3, IECR-6/1.5V) batteries
that came with the remote control unit facing in
the directions shown in the figure, then close the
rear cover.
Notes:
Using batteries improperly can cause them to
explode. Take note of the following points:
• When replacing batteries, replace both batteries
with new ones.
• Do not short-circuit, disassemble or heat batteries.
• Do not dispose of batteries into fire or flames.
• Dispose of spent batteries properly.
VRX935VD 15
English
Owner’s manual
Functions of Remote Control Unit Buttons
● Shared modes
[FUNC] button
• Press and hold this button for 1 second or
longer to turn on or off the power. Power on/
off, switches among radio, TV, etc.
[VOLUME] button
• Increases and decreases volume.
[MUTE] button
• Turns mute on and off.
[CeNET] switch
• For operating this unit, switch this switch to
the CeNET position.
● Radio/TV mode
[BAND] button
• Switches reception band.
[0 - 9] button
• Use in the KEY PAD operation screen to set
the radio frequency and TV channels.
[DISC SEL] button
• Press to display the P.CH SELECT screen.
[SEARCH MODE] button
• Press to display the KEY PAD operation
screen.
[ENT] button
• Press to confirm numerics entered in the KEY
PAD operation screen.
[ ], [ ] buttons
• Press to select the next higher or lower preset
channel in radio and TV mode.
[A], [D] button
• Press to select the next higher or lower
frequency in radio and channel in TV mode.
[SCAN] button
• Press to perform preset scans in the radio and
TV modes.
• Hold down to perform the auto store operation
in the radio and TV modes.
● DVD player mode
[BAND] button
• Press to return to the first chapter in DVD
video mode.
• Press to return to the first track in CD/MP-3
mode or video CD mode with the PBC
function turned off.
[P.TIME] button
• Press to turn on and off the playtime display in
the DVD video and video CD mode.
• Press and hold this button for 1 second or
longer to switch the playback status display
contents.
[ß] button
• Press to stop video playback in DVD video
and video CD mode.
[s] button
• Press to play or pause video and audio
media.
[0 - 9] button
• Press to enter DVD video chapters in the KEY
PAD screen.
• Press to set the track number of the Video CD
with the PBC function turned off, CD track
number or MP-3 track number in the KEY
PAD screen.
[SEARCH MODE] button
• Press to display the KEY PAD operation
screen.
[RTN] button
• Press to switch the screen display while the
MENU screen is being displayed. However, it
may occur that this button operation dose not
work on some discs.
[MENU] button
• Press to display menu stored on video disc.
• MP3: Returns the cursor to the default
position and displays the files (track) select
screen.
[SET UP] button
• Press to display the menu for setting audio
features during DVD video playback.
• Press and hold this button for 1 second or
longer to show the DVD SETUP menu.
∗ If you want to select a menu after the SETUP
menu is displayed, touch the operation keys on
the menu screen.
[TITLE] button
• Press to display the title screen on DVD video
discs. Some discs do not display the title
screen.
16 VRX935VD
English
Owner’s manual
[w], [z], [Å], [Î] button
• Press to select menus and other items during
DVD video/MP-3 playback.
[ENT] button
• Press to confirm numerics entered in the KEY
PAD operation screen.
[ ] [ ] buttons
• Press to select the next higher or lower
chapter number in DVD video mode.
• Press to select the next higher or lower track
numbers in CD/MP-3 mode or video CD mode
with the PBC function turned off.
[A] [D] button
• Hold down to perform fast-forward and fastbackward.
[SCAN] button
• Press to perform chapter scans in DVD video
mode and track scans in CD mode. Press to
perform track scan and hold down to perform
folder in MP-3 mode.
[RPT] button
• Press to perform chapter repeat in DVD video
mode and track repeat in CD mode. In the
MP-3 mode, press to perform track repeat and
hold down to perform folder repeat.
[RDM] button
• Press to play tracks at random in CD mode. In
the MP-3 mode, press to play tracks at random
and hold down to play folders at random.
[PBC] button
• Press to turn on and off the PBC function in
video CD mode.
If the button is pressed and held for 5 seconds
or longer, the DVD video player parameter
settings are returned to the factory default
settings.
[AUDIO] button
• Press to switch on the AUDIO function in DVD
video and video CD modes.
[SUB TITLE] button
• Press to display subtitles in DVD video mode.
[ANGLE] button
• Press to turn the ANGLE function on and off in
DVD video mode. (This button is available
only on multiple angles DVDs.)
Functions of Remote Control Unit Buttons
[SLOW] button
• Press to perform slow playback in DVD video
or video CD mode.
● CD/MD changer mode
[BAND] button
• Press to switch discs.
[DISC SEL] button
• Used to change the disc.
[s] button
• Press to play and pause the media.
[0 - 9] buttons
• Press to enter track numbers in the KEY PAD
screen.
[SEARCH MODE] button
• Press to display the KEY PAD operation
screen.
[ ] [ ] buttons
• Press to select the next higher or lower
playback track.
[A] [D] button
• Hold down to perform fast-forward and fastbackward.
[SCAN] button
• Press to perform track scan and hold down to
perform disc scan.
[RPT] button
• Press to perform track repeat and hold down
to perform disc repeat.
[RDM] button
• Press to play tracks at random and hold down
to play folders at random.
● DVD changer mode
[BAND] button
• Press to switch discs.
[DISC SEL] button
• Used to change the disc.
∗
Other button operations in this mode are
the same as those in DVD player mode.
VRX935VD 17
English
Owner’s manual
8. DCP
The control panel can be detached to prevent
theft. When detaching the control panel, store it
in the DCP (DETACHABLE CONTROL PANEL)
case to prevent scratches.
We recommend taking the DCP with you when
leaving the car.
Removing the DCP
1. Turn the power off.
2. Slide the [RELEASE] lever leftward to
release the DCP/Operation Panel.
3. Pull the DCP toward you and remove it.
Attaching the DCP
1. Insert the DCP so that the A section on the
left side of the DCP catches on the hook B
on the unit.
3. Press the [FUNC] button to turn on the
power.
2. Press the right side of the DCP carefully to fit
it in place.
• The DCP can easily be damaged by shocks.
After removing it, be careful not to drop it or
subject it to strong shocks.
• If the Operation Panel is kept open, the DCP
may drop due to vibration of the car. This
results in damage to the DCP. So close the
Operation Panel or remove the DCP to store
into the case.
• The DCP is an extremely important part. Be
careful not to damage it by pressing on it with
fingernails, screwdrivers, etc.
• In case the Control Panel is kept open
When you detach the DCP, the panel is to be
stored automatically after a warning sound.
When you attach the DCP, the panel is to
come out to its original position after a
warning sound.
Note:
• If the DCP is dirty, wipe off the dirt with a soft, dry
cloth only.
CAUTION
DCP
DCP
DCP
A
B
DCP
18 VRX935VD
English
Owner’s manual
9. CAUTIONS ON HANDLING
LCD panel/Generalities
For a longer service life, be sure to read the following cautions.
• Be sure to store the LCD panel inside the
main unit when parking the car outdoors for
long period of time. The LCD panel will
operate properly in a temperature range of 0
to 60˚C.
• Don’t allow any liquids on the set from drinks,
umbrellas etc. Doing so may damage the
internal circuitry.
• Do not disassemble or modify the set in any
way. Doing so may result in damage.
• Do not draw the LCD panel out and use it as a
tray. Also, subjecting the LCD panel to shocks
may result in breakage, deformation or other
damage.
• Do not let cigarettes burn the display. Doing
so may damage or deform the cabinet.
• If a problem should occur, have the set
inspected at your store of purchase.
• Do not insert objects or poke in the space
between the LCD panel and the main unit
when the panel is tilted.
• Do not place anything on the display when the
panel is tilted.
• The remote controller may not work if the
remote control sensor is exposed to direct
sunlight.
• In extremely cold weather, the display
movement may slow down and the display
may darken, but this is not a malfunction. The
display will work normally when the
temperature increases.
• Small black and shiny spots inside the LCD
panel are normal for LCD products.
• The LCD panel may stop temporarily when it
opens or closes, when the engine stops or
when it is cold.
• The touchkeys on the display operate when
slightly touched. Do not press the touchkey
screen with much force.
• Do not push the case surrounding the
touchkey panel with much force. This may
cause malfunctioning of the touchkeys.
Cleaning
• Cleaning the cabinet
Use a soft, dry cloth and gently wipe off the
dirt. For tough dirt, apply some neutral
detergent diluted in water to a soft cloth, wipe
off the dirt gently, then wipe again with a dry
cloth.
Do not use benzene, thinner, car cleaner, etc.,
as these substances may damage the cabinet
or cause the paint to peel. Also, leaving
rubber or plastic products in contact with the
cabinet for long periods of time may cause
stains.
• Cleaning the LCD panel
The LCD panel tends to collect dust, so wipe
it off occasionally with a soft cloth. The
surface is easily scratched, so do not rub it
with hard objects.
VRX935VD 19
English
Owner’s manual
DVD video is a high-quality digital video source
that provides crisp and clear images. One 12
cm disc contains either one film or four hours of
music.
DVD Video Features
This unit provides the following functions in
addition to the high image quality and sound
quality of DVD video.
Notes:
• The functions described in the section,
“Features”, for example, the recorded language,
subtitles, angles, etc. differ with the DVD video
disc. Refer to the instructions provided with the
DVD video.
• Some disc functions may operate differently than
described in this manual.
Multi-sound function
DVD video can store up to 8 languages for one
film; select the language of your preference.
• The languages stored on the disc are
indicated by the icon shown below.
10. DVD VIDEO SYSTEM
Multi-story function
When a DVD video contains more than one
story for a film, you can select the story you
wish to enjoy. The operation procedures vary
with the disc; observe the instructions for
selecting a story provided during playback.
Dolby digital
Dolby digital enables up to 5.1 independent
multi-channel audio reproduction, the same type
of surround system that is also used in movie
theaters.
DTS
DTS (Digital Theater System) is a digital sound
compression technique developed by Digital
Theater Systems, Inc.
This low sound compression format delivers a
large amount of data and makes it possible to
reproduce a high quality sound.
Menu screens
Menus can be called up during DVD video
playback to perform menu setting.
• Example showing menu display
Multi-angle function
A DVD video that is filmed from multiple angles
allows you to select the angle of choice.
• The number of recorded angles are indicated
by the icon shown below.
Subpicture (subtitles) function
A DVD video can record subtitles for up to 32
languages and you can select the language of
the subtitles you wish to see.
• The number of recorded subtitle languages
are indicated by the icon shown below.
20 VRX935VD
English
Owner’s manual
Discs
Playable discs
This DVD video player can play the following
discs.
TV color system
This DVD player plays NTSC discs and PAL
discs only and cannot be used for playback of
SECAM discs.
About MP3 playback
This unit can play back CD-R/CD-RW discs on
which MP3 music data have been recorded.
For a detailed information, see the page entitled
“Listening to an MP3”.
About the registered marks etc.
• This product incorporates copyright protection
technology that is protected by method claims
of certain U.S. patents and other intellectual
property rights owned by Macrovision
Corporation and other rights owners. Use of
this copyright protection tecnology must be
authorized by Macrovision Corporation, and is
intended for home and other limited viewing
uses only unless otherwise authorized by
Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
• Manufactured under license from Dolby
Laboratories.
“Dolby” and the duble-D symbol are
trademarks of Dolby Laboratories.
•“DTS” is a registered trademark of Digital
Theater Systems, Inc.
About CD Extra discs
A CD Extra disc is a disc in which a total of two
sessions have been recorded. The first session
is Audio session and the sedond session Data
sessioin.
Your personally-created CDs with more than 2
data sessions recorded cannot be played on
this DVD video player.
Discs that cannot be played back
This DVD video player cannot play back DVD-R,
DVD-RAM, DVD-ROM, CD-ROM, Photo CDs.
• Some CDs recorded in CD-R or CD-RW mode
may not be usable. (Cause: disc
characteristics, cracks, dust/dirt, dust/dirt on
player’s lens, etc.)
Note on region numbers
The DVD video system assigns a region number
to DVD video players and DVD discs by sales
area.
The DVD video region number is marked on the
disc jacket as shown below.
(Oceania)
(Asia)
Playable discs
DVD video discs
Audio CDs
video CDs CD TEXT
ALL
3
4
6
4
ALL
3
4
6
3
VRX935VD 21
English
Owner’s manual
11. OPERATIONS
Basic Operations
Note: Be sure to read this chapter referring to the front diagrams of
chapter “3. CONTROLS” on page 5 (unfold).
When the unit is turned on, starting and
stopping the engine with its volume raised to
the maximum level may harm your hearings.
Be careful about adjusting the volume.
CAUTION
Turning on and off the power
Note:
• Be careful about using this unit for a long time
without running the engine. If you drain the car’s
battery too far, you may not be able to start the
engine and this can reduce the service life of the
battery.
1. Press the [FUNC] button.
2. The illumination and display on the unit light
up. The unit automatically remembers its last
operation mode and will automatically switch
to display that mode.
3. Press and hold the [FUNC] button for 1
second or longer to turn off the power for the
unit.
Note:
• About the “SYSTEM CHECK”
The confirmation of connected equipment must
be performed for this unit only when the wiring
connection is complete and power is turned on to
the unit first. When the power is supplied, “PUSH
PWR” appear in the display. Press the [FUNC]
button, the system check starts inside the unit.
When “COMPLETE” and “PUSH PWR” appear
alternately, press once again the [FUNC] button.
Selecting a mode
1. Press the [FUNC] button to change the mode
of operation.
2. Each time you press the [FUNC] button, the
mode of operation changes in the following
order:
Radio mode ➜ DVD mode ➜ CD changer
mode ➜ MD changer mode ➜ DVD changer
mode ➜ TV mode ➜ VISUAL mode ➜ Radio
mode...
∗ External equipment not connected with
CeNET is not selected.
Note:
• Use this unit after starting the engine.
ACC or engine
ON position
Adjusting the volume
1. Operate the [VOL] button in the direction of
the + (up) or – (down) to adjust the volume;
+ : Increases the volume.
– : Decreases the volume.
∗ The volume level indicated in the display is in a
range from 0 (minimum) to 33 (maximum).
While driving, keep the volume at a level at
which external sounds can be heard.
CAUTION
Switching the display
When the panel is closed:
1. Press the [DISP] button to select the desired
display.
Each time you press the [DISP] button, the
display switches in the following order:
Notes:
• Once selected, the preferred display becomes the
default display. When a function adjustment such
as volume is made, the display momentarily
switches to that function’s display, then returns
back to the preferred display several seconds
after the adjustment.
• If a title has been input, it is shown in the SUB
display. If no title has been input, “NO TITLE”
appears in the display. To input a title, refer to the
subsection “Entering titles” in “Other Functions”
section.
• For CD, MD and TV, some special characters of
the title will not be displayed on the Information
Panel of the DCP. In this case, those characters
will only be left blank.
MAIN Display
SUB Display
Clock Time Display
MAIN Display
22 VRX935VD
English
Owner’s manual
Opening and turning the display
20˚
20˚
Basic Operations
WARNING
• To prevent the battery from going dead,
operate this unit with the engine
running, if possible.
• When the liquid crystal panel is operating,
be careful not to get your hand or finger
caught between the panel and main unit
or the instrument panel of the car.
Standing up the liquid crystal panel
1. Press the [OPEN] button and the liquid
crystal panel comes out and stand up
automatically.
∗ While the liquid crystal panel is opening or
closing, the LED of the [FUNC] button blinks.
Note:
• If the liquid crystal panel stops in the middle of its
operation, press the [OPEN] button to house the
panel and press the button again to stand it up.
The unit enters the same display mode as the
display was turned off the last time.
Adjusting the angel, etc. of the
liquid crystal panel
The angle of the liquid crystal panel or
protruding amount of the panel from the
mounting surface can be adjusted depending on
the mounting angle of the unit or light coming
into the car.
●
To adjust the angle
1. Every time the [TILT] button is pressed, the
liquid crystal panel tilts forward or backward
at up to about 20 degrees. The adjusted
angel is stored in memory.
Note:
• Do not move the liquid crystal panel by hand.
●
To adjust the slide position
1. Press and hold the [TILT] button and release
when a beep is heard.
The liquid crystal panel slides forward or
backward. The adjusted slide position is
stored in memory.
* There are 3 adjustable positions available on
this panel.
Housing the liquid crystal panel
1. Press the [OPEN] button and the liquid
crystal panel is housed automatically.
Note:
• When leaving this unit unused for a long period of
time or leaving your car, be sure to house the
liquid crystal panel into the main unit.
VRX935VD 23
English
Owner’s manual
Basic Operations
Turning the liquid crystal panel
horizontal (Air conditioner
operation mode)
When the way the liquid crystal panel is
mounted hinders the operation of the air
conditioner, the position of the panel can be
turned horizontal temporarily.
1. Press and hold the [OPEN] button when the
liquid crystal panel is upright, and release the
button when a beep is heard.
2. The liquid crystal panel turns horizontal.
∗ Press the [OPEN] button again when the
liquid crystal panel is in the horizontal position,
and the panel returns to the original position.
∗ Even if the button is not operated for about 10
seconds, the panel returns to the original
position with a warning sound.
Turning on and off the monitor
1. Pressing and holding the [M.L] button for 1
second or longer turns the monitor off. To
return to the monitor on, press the [M.L]
button once again.
∗ When a button is pressed or during security
monitoring, the monitor-off mode is canceled.
Mute
1. Each time you press the [MUTE] button,
mute is turned on and off. “MUTE” appears
when mute is turned on.
Setting the Beat EQ
• This function is enabled only when the panel is
open.
This unit comes with 3 types of sound tone
effect stored in memory. Select the one you
prefer.
∗ The factory default setting is “USER CUSTOM”.
1. Press the [A-M] button to change into the
AUDIO MODE menu.
2.
When the AUDIO MODE menu is displayed,
touch the key for the desirable type to select it.
• BASS BOOST : bass emphasized
• IMPACT : bass and treble
emphasized
• EXCITE : bass and treble
emphasized mid deemphasized
• USER CUSTOM : user custom
• TONE BYPASS : no sound effect (Beat EQ
off)
3. When the setting is finished, touch the [RTN]
key or press the [A-M] button to return to the
previous mode.
When the Beat EQ (BASS BOOST, IMPACT,
EXCITE, USER CUSTOM) is set, “B.EQ”
appears in the display.
Note:
• When the separately-sold 5.1ch Surround
Decoder (DVH920) is used, the bass and treble
tone adjustments cannot be made. To adjust the
tone, refer to the section “5.1ch Surround
Decoder Operations”.
Adjusting the non fader output
volume
You can adjust the volume output from the unit’s
non fader output terminal.
1. Press the [A-M] button, then touch the
[DETAIL] key.
2. Touch the [NON-FAD VOL] key.
3. Touch the [w] or [z] key to adjust to
desirable level.
∗ The factory default setting is “0”. (Setting
range: –6 to 6)
4. When the adjustment is complete, touch the
[RTN] or press the [A-M] button to return to
the previous mode.
Adjusting the bass
The bass gain, bass frequency (center
frequency) and bass Q can be adjusted as
follows.
1. Press the [A-M] button, then touch the
[USER CUSTOM] key.
2. Touch the [DETAIL] key, then touch the
[BASS] key.
3. When the bass type selection screen is
displayed, touch the key for the desirable
type to select it.
4. Touch the [w] or [z] key to adjust to
desirable level.
GAIN : –6 to 8 (The factory default setting
is “0”)
FREQ. : 50Hz/80Hz/120Hz (The factory
default setting is “50”)
Q : 1/1.25/1.5/2 (The factory default
setting is “1”)
5. When the adjustment is complete, touch the
[RTN] key several times or press the [A-M]
button to return to the previous mode.
24 VRX935VD
English
Owner’s manual
Basic Operations
Adjusting the MID
The MID gain, MID frequency (center
frequency) and MID Q can be adjusted as
follows.
1. Press the [A-M] button, then touch the
[USER CUSTOM] key.
2. Touch the [DETAIL] key, then touch the
[MID] key.
3. When the bass type selection screen is
displayed, touch the key for the desirable
type to select it.
4. Touch the [w] or [z] key to adjust to
desirable level.
GAIN : –6 to 6 (The factory default setting
is “0”)
FREQ. : 700Hz/1kHz/2kHz (The factory
default setting is “1k”)
Q : 1.5/2 (The factory default setting is
“2”)
5. When the adjustment is complete, touch the
[RTN] key several times or press the [A-M]
button to return to the previous mode.
Adjusting the TREBLE
The treble gain and treble frequency (center
frequency) can be adjusted as follows.
1. Press the [A-M] button, then touch the
[USER CUSTOM] key.
2. Touch the [DETAIL] key, then touch the
[TREBLE] key.
3. When the bass type selection screen is
displayed, touch the key for the desirable
type to select it.
4. Touch the [w] or [z] key to adjust to
desirable level.
GAIN : –6 to 6 (The factory default setting
is “0”)
FREQ. : 8kHz/12kHz (The Factory default
setting is “12K”)
5. When the adjustment is complete, touch the
[RTN] key several times or press the [A-M]
button to return to the previous mode.
Adjusting the balance/fader
1. Press the [A-M] button, then touch the
[DETAIL] key.
2. Touch the [BAL/FAD] key.
3. Touch the [w] or [z] key to adjust to the
fader level.
∗ The factory default setting is “0”. (Adjustment
range: front 13 to rear 13)
[w] key: Emphasized the sound from the
front speakers.
[z] key: Emphasized the sound from the
rear speakers.
4. Touch the [Å] or [Î] key to adjust to the
balance level.
∗ The factory default setting is “0”. (Adjustment
range: left 12 to right 12)
[Å] key : Emphasized the sound from the left
speakers.
[Î] key : Emphasized the sound from the
right speakers.
5. When the adjustment is complete, touch the
[RTN] key several times or press the [A-M]
button to return to the previous mode.
Adjusting the Beat EQ
1. Press the [A-M] button and select “BASS
BOOST or IMPACT or EXCITE”.
2. Touch the [DETAIL] or [LEVEL] key to
display the level adjustment screen.
3. Touch the [w] or [z] key to adjust to
desirable level.
∗ When BASS BOOST is selected, you can
adjust the bass in the range of –3 to 3.
∗
When IMPACT and EXCITE is selected, you
can adjust the bass and treble in the range of –
3 to 3.
4. When the adjustment is complete, touch the
[RTN] key several times or press the [A-M]
button to return to the previous mode.
Turning on/off the loudness
The loudness effect emphasizes the bass to
create a natural sound tone. When you are
listening to music at a low volume, it is
recommended to use the loudness effect.
1. Press and hold the [A-M] button for 1 second
or longer to turn on the loudness effect.
When the loudness effect is turned on, “LD”
lights in the display.
2. Press and hold the [A-M] button for 1 second
or longer to turn off the loudness effect. “LD”
goes off in the display.
VRX935VD 25
English
Owner’s manual
Basic Operations
Changing the setting of the display
background
1. Press the [DISP] button for 1 second or
longer to show the background setup menu.
∗ This menu appears only during Radio and
DVD (with CD, MP3), CD/MD changer mode,
and when the car is moving.
2. Touch the setting key to show the setup
display.
● To set up the motion pattern
2-1. Touch the [MOTION] key to set a
desired motion pattern.
2-2. Touch a desired MOTION PATTERN.
● To set up the sprite pattern
2-1. Touch the [SPRITE] key to set a desired
sprite pattern.
2-2. Touch a desired SPRITE PATTERN.
● To set up the wall color
2-1. Touch the [WALL COLOR] key to set a
desired wall color.
2-2. Touch a desired WALL COLOR.
3. Press the [DISP] button again or touch the
[RTN] key to return to the STANDARD
screen.
FM reception
For enhanced FM performance the
®
tuner includes signal actuated stereo control,
Enhanced Multi AGC, Impulse noise reduction
curcuits and Multipath noise reduction circuits.
Changing the reception area
This unit is initially set to USA frequency
intervals of 10kHz for AM and 200kHz for FM.
When using it outside the USA, the frequency
reception range can be switched to the intervals
of 9 kHz for AM and 50 kHz for FM.
● Setting the reception area
1. While pressing [DISP] button, each time you
press and hold the number “6” of the
[DIRECT] buttons for 2 seconds or longer,
the reception area switches from inside the
USA to outside the USA or from outside the
USA to inside the USA.
∗ Any station preset memories are lost when the
reception area is changed.
Listening to the radio
1. Press the [FUNC] button and select the
RADIO mode. The frequency is displayed.
2. Press the [BND] button and select the radio
band. Each time the button is pressed, the
radio reception band changes in the
following order:
FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...
3. Press the [a] or [d] button to tune in the
desired station.
∗ When the panel is open, the same operation
is also available by using the [a] or [d]
button in the panel.
Radio Operations
WARNING
Perform the setting of this function only
when the car is stopped and the parking
brake is applied.
Loading...