The Clarion OHM720/OHM820 is a full-featured 7”/8” LCD Color Monitor that can
be used as a stand-alone monitor, or can be integrated into a mobile multimedia
system.
The OHM720/OHM820 has the following features:
l TFT Active Matrix Display
l Swivel Mechanism
l 16:9/4:3 Adjustable Wide Screen Format (OHM720 only)
l 2 RCA Composite Video Inputs
l 1 RCA Composite Video Output
l Lightweight Plastic Housing
l Built-In Dome Light
l Built-In IR Transmitter for Wireless Headphones
l Front Panel Power Indicator and Separate Power, Channel Up/Down, Aux,
FM Modulator and Picture Mode Button Controls
l FM Modulator Output Connector (for FM200 Add-On's)
l Includes Universal Mounting Bracket and Two IR Wireless
Headphones (WH100H)
l IR Remote Controls Monitor Functions, Optional VCR (VDH910)
and Optional TV Tuner (TTX001) Functions
l Includes Ribbon Cable (for TTX001 TV Tuner Add-On's)
ABOUT THE MANUAL AND WARRANTY
To start enjoying your new Clarion monitor, please read the instructions listed in
the manual. Keep all instructions for future reference. Also, save your original
sales receipt as proof of purchase.
l The set is for use in DC 12V, negative ground vehicles.
l Do not operate the set in ways other than described in this guide.
Doing so may damage it and voids your warranty.
l SAFETY FIRST! For rear seat use only. Do not install in dashboard or
anywhere else that would permit monitor to be viewed by the driver.
Monitor must never be used in any manner that will distract driver or
interfere with the driver's safe operation of the motor vehicle.
l Be careful not to run down the car battery while using the set with the car
stopped.
l Do not disassemble or modify the set. Doing so may damage it and voids
your warranty.
l Keep drinks and drops from umbrellas away from the set.
Water may damage the internal circuitry.
l Do not let the set become hot. If temperature in the car is high or the set
has been exposed to direct sunlight and is hot, lower the temperature
before using it. (The liquid crystal panel will work properly within a
temperature range of 14°F - 144° F).
l In extremely cold temperatures, the movement of the picture may be slow
and the picture may be dark, but this is not a malfunction. The set will
work normally once the temperature increases.
l Small black and shiny dots inside the liquid crystal panel are normal for
liquid crystal product.
2. DESCRIPTION
The OHM720/OHM820 is a TFT active matrix color LCD monitor that delivers a
striking picture and superior image resolution. The OHM720/OHM820 can be
used to enjoy video images with the Clarion video sources, even if no TV tuner
is connected.
3. PACKAGE CONTENTS
DESCRIPTIONQ’TY
LCD Monitor1
IR Headphones (WH100H)2
Universal Trim Ring1
IR Remote Control1
A/V Din Cables 2
TV Input Ribbon Cable1
FM Modulator Din Cable 1
Power Connector 1
M3X8 Screws5
Manual/Installation Guide1
OHM720, OHM820
4. MONITOR BUTTON FUNCTIONS
1Monitor Release Button
2Dome Light Switch
3Power Button
4Channel Select Up
5Channel Select Down
6Mode Selector
7FMModulator On/Off Button
8Auxiliary Input Selector
9Power LED
10 IR Sensor
5. DESCRIPTION OF IR REMOTE CONTROL
Button Functions
OWNER’S MANUAL
1 Power Button for Monitor
Powers on monitor
2 TV/Video Button
Switches between A/V1, A/V2, TV.
3 FM Modulator Button
Turns FM Modulator ON/OFF.
4 Auto Memory Button for TTX001 (TV Tuner)
Locks channels with good reception.
5 Channel Up for TTX001 (TV Tuner)
Changes TV channels up.
6 Channel Down for TTX001 (TV Tuner)
Changes TV channels down.
7 Picture Select Button for Monitor
Goes into picture mode menu for Monitor to select Contrast, Brightnesss, Color,
Tint and Wide Screen Mode.
8 Picture Mode Up Button
Adjusts selected picture mode.
9 Picture Mode Down Button
Adjusts selected picture mode.
10 TV Tuner/VCR Button for VDH910 (VCR)
Changes input source selection from VCR to TV Tuner.
11 Enter Button for VDH910 (VCR)
Toggles between selection of the On-Screen Menu choice.
12 Menu Button for VDH910 (VCR)
Displays the On-Screen Menu, or changes and exits the On-Screen Menu.
13 Power Button for VDH910 (VCR)
Powers the unit ON or OFF.
14 FF Button for VDH910 (VCR)
Press FF to fast forward the tape.
15 Play Button for VDH910 (VCR)
Press button to play the videocassette.
16 REW Button for VDH910 (VCR)
Press REW to rewind the tape.
17 Skip Button for TTX001 (TV Tuner)
Will skip through channels with no reception.
18 Shift Button for TTX001 (TV Tuner)
Changes menu selection.
19 Stop Button for VDH910 (VCR)
Press to stop any play, fast forward, or rewind mode.
20 Still/Slow Button for VDH910 (VCR)
Press once to pause for STILL frame. Press again to advance frame by
frame. Press and hold button for SLOW motion playbacks.
21 Channel Track DOWN Button for VDH910 (VCR)
In TV Tuner mode, changes TV Channels down.
22 Channel Track UP Button for VDH910 (VCR)
In TV Tuner mode, changes TVChannels up.
Loading...
+ 9 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.