Clam Corp One Tough Trailer User Manual

TANDEM WALKING ARM

Item Number: 8251

WARNING: THIS CONVERSION KIT IS INTENDED FOR INSTALLATION ON POLAR
TRAILERS ONLY. USE WITH OTHER TRAILERS COULD RESULT IN SERIOUS INJURY
OR DEATH.

NOTICE: Once used, this trailer cannot be returned to the store. If you have a warranty
claim, please contact Polar Sport directly.

Warranty Information
Polar Sport, LLC. (a division of CLAM Corporation, Inc.) warrants to the original retail

purchaser its product be free from manufacturers defects for one (1) year from the date of the
original purchase. Polar Sport will replace or repair any part found defective within the one (1)
year time limit. All parts must be returned to Polar Sport. Before returning any parts, you must first
call or write and acquire a return authorization. All returns must be returned postage-prepaid and
include the original cash register receipt (date and purchase price).

To obtain a return authorization, please use one of the following methods:

• Call: 763-231-4120

• Write: Clam Corporation, Inc.

Attn: Customer Service – Returns
600 Cyldesdale Trail

• Email: [e-mail]

The warranty does not apply to any Polar Trailer which has been subjected to an accident,
improper installation, modification, adjustment, repair, misuse, misapplication, neglect, including
but not limited to improper maintenance, or use of unauthorized parts or attachments.

Limitation of Liability

It is expressly understood that Polar Sport liability for its products, whether due to breach of
warranty, negligence, strict liability, or otherwise, is limited to the repair of the product as stated
above. Polar Sport is not liable for any injury, loss, damage, or expense, whether direct or
consequential, including but not limited to loss of use, income, profit, or damage to material
arising in connection with the sale, installation, use of, inability to use, or the repair or
replacement of Polar Sport products. Polar Sport reserves the right to make alterations or
modifications in its products at any time, which in its opinion, may improve the performance and
efficiency of the product. It shall not be obligated to make such alterations or modifications to
products already in service.

Medina, MN 55340

Towing Loads Safely

• Stopping distance increases with speed and weight of towed load. Travel slowly and
allow extra time and distance to stop.

• Total towed weight must not exceed limits specified in towing vehicle operator’s manual.

• Excessive towed load can cause loss of traction and loss of control on slopes. Reduce

towed weight when operating on slopes.

• Never allow children or others in or on towed equipment.

• Use only approved hitches. Tow only with a machine that has a hitch designed for towing.

Do not attach towed equipment except at the approved hitch point.

• Follow the manufacturer’s recommendations for weight limits for towed equipment and
towing on slopes.

• Do not turn sharply. Use additional caution when turning or operating under adverse
surface conditions. Use care when reversing.

• Do not shift to neutral and coast downhill.

WARNING: THIS ATTACHMENT IS INTENDED FOR USE IN LAWN CARE AND HOME
APPLICATIONS. DO NOT TOW BEHIND A VEHICLE ON A HIGHWAY OR IN ANY HIGH
SPEED APPLICATION.

Protect Bystanders

• Keep bystanders away when you operate a towed attachment.

• Before you back machine and attachment, look carefully behind attachment for

bystanders.

Keep Riders off Towed Attachment

• Keep riders off of a towed attachment.

• Riders on a towed attachment are subject to injury, such as being struck by objects and

being thrown off the attachment during sudden starts, stops and turns.

• Riders obstruct the operator’s view, resulting in the attachment being used in an unsafe
manner.

• Keep riders off of the hitch bracket or trailer tongue.

Disconnecting Towed Attachment

• Unload trailer.

• Stop attachment on level ground.

• Stop machine engine.

• Lock machine park brake.

• Block attachment wheels.

Replacement Parts

Item Part Number Description

1 101732 1" Flat Washer
2 101757 18x8.50x8 Wheel Assembly
3 101823 1/4" Lynch Pin
4 101825 Dust Cap
5 101870 Pivot Arm Weldment