Cissell LDBB Installation Manual

Mighty Mite and

Super Laundry

Presses

Refer to Page 3 for Model Numbers

Operation/Maintenance

Keep These Instructions for Future Reference.

(If this machine changes ownership, this manual must accompany machine.)

An LSG Company 831 South First Street, P.O. Box 32270 Louisville, KY 40232-2270 Phone: (502) 587-1292 Sales Fax: (502) 585-3625 Service/Parts Fax: (502) 681-1275 www.cissellmfg.com

SCR1529C

Part No. AJ1032

February 2005

Table of

Contents

Model Identification ........................................................................... 3

Safety Information .............................................................................. 5

Explanation of Safety Messages........................................................... 5

Important Safety Instructions ............................................................... 5

Introduction......................................................................................... 7

Nameplate Location.............................................................................. 7

Parts Ordering Information................................................................... 7

General Description.............................................................................. 7

Optional Equipment.............................................................................. 7

Operation............................................................................................. 9

Operating Controls................................................................................ 9

Pre-Operating Services......................................................................... 10

Press Operation..................................................................................... 10

Presses WITHOUT Timers or Presses WITH Timer Set to OFF

Position........................................................................................... 10

Presses With Timers ONLY ............................................................ 10

Post-Operating Services........................................................................ 11

Maintenance ........................................................................................ 13

Periodic Inspections.............................................................................. 13

Cleaning Press Head ........................................................................ 14

Cleaning Air Filter ........................................................................... 15

Cleaning Steam Strainer .................................................................. 15

Cleaning Customer-Furnished Steam Traps .................................... 15

Lubrication............................................................................................ 16

Adjusting Air Line Lubricator Flow Rate........................................ 18

Filling Air Line Lubricator .............................................................. 18

Quality Troubleshooting....................................................................... 19

means without the expressed written consent of the publisher.

AJ1032

Notes

AJ1032

Model Identification

Information in this manual is applicable to the following models:

LDBB (CMMBB) LDCC (CMMCCY)

AJ1032

Notes

Safety Information

Indicates an imminently hazardous situation that, if not avoided, will cause severe personal injury or death.

DANGER

WARNING indicates the presence of a hazard that can cause severe personal injury, death, or substantial property damage if the warning is ignored.

WARNING

CAUTION indicates the presence of a hazard that will or can cause minor personal injury or property damage if the caution is ignored.

CAUTION

Explanation of Safety Messages

Precautionary statements (“DANGER,” “WARNING,” and “CAUTION”), followed by specific instructions, are found in this manual and on machine decals. These precautions are intended for the personal safety of the operator, user, servicer, and those maintaining the machine.

Important Safety Instructions

Save These Instructions

WARNING

To reduce the risk of fire, electric shock, serious injury or death to persons when using your press, follow these basic precautions:

W372

1. Read all instructions before using the press.

2. Refer to the GROUNDING INSTRUCTIONS in the INSTALLATION manual for the proper grounding of the press.

3. Do not allow children to play on or around the press.

4. Do not reach into the press while the press is in operation.

5. Do not install or store the press where it will be exposed to water and/or weather.

Additional precautionary statements (“IMPORTANT” and “NOTE”) are followed by specific instructions.

IMPORTANT: The word “IMPORTANT” is used to inform the reader of specific procedures where minor machine damage will occur if the procedure is not followed.

NOTE: The word “NOTE” is used to communicate installation, operation, maintenance or servicing information that is important but not hazard related.

6. Do not tamper with the controls.

7. Do not repair or replace any part of the press, or attempt any servicing unless specifically recommended in the user-maintenance instructions or in published user-repair instructions that the user understands and has the skills to carry out.

8. To reduce the risk of an electric shock or fire, DO NOT use an extension cord or an adapter to connect the press to the electrical power source.

9. Use press only for its intended purpose, finishing garments.

10. ALWAYS disconnect the press from electrical supply before attempting any service. Disconnect the power cord by grasping the plug, not the cord.

11. Install the press according to the INSTALLATION INSTRUCTIONS. All connections for steam, electrical power and grounding must comply with local codes and be made by licensed personnel when required.

AJ1032

+ 15 hidden pages