Cissell HW55, HW64, HW72, HW75, HW94 Instruction Manual

3

4

4

7

10

10

10

10

10

11

12

13

13

14

15

23

29

30

30

30

31

33

Content

Contents

1 General safety instructions ...........................................................................

2 Technical data and dimensions ....................................................................

Technical data .............................................................................................

Dimensions ..................................................................................................

3 Installation and connection ..........................................................................

Ground .........................................................................................................

Removing the transport brackets .................................................................

Water connection .........................................................................................

Water drain ..................................................................................................

Main power connection .................................................................................

Liquid soap connection ................................................................................

Connection of a central operating panel for coinmachines (option) ...............

Steam connection ........................................................................................

4 Operating instructions ..................................................................................

Machine with start button .............................................................................

Machine with coin or token operation............................................................

5 Standard programs .......................................................................................

6 Technical remarks.........................................................................................

Internal connection of the electrical heating .................................................

Tilt switch ....................................................................................................

Error messages ...........................................................................................

7 Maintenance of the machine ........................................................................

Code: 249/00078/01

10/06/2002

3

p

p

1

General safety instructions

Ignoring any of the safety instructions can cause serious
personal injury and can also cause damage to the linen or the
machine

p

p
p

p

p
p

p
p

p

p

p

Read the installation and instruction manual carefully before connecting the
machine.

It is recommended that the machine be installed by qualified technicians.

The machine should be installed according to the installation instructions. (See
chapter 3)

The machine should be grounded according to the instructions in order to
eliminate the risk of electrocution.

Do not expose the machine to high humidity or extreme high or low temperatures.

Cut off all main water inlets, steam and electrical supplies at the end of each
operating day.

Before starting repairs or maintenance, shut off all power and water supplies.

To prevent fire and explosion:
Keep the area around the machine free from inflammable or combustible
products.
Do not put fabrics that are treated with inflammable products into the machine.
These fabrics should be hand-washed or air-dried first.

Always carefully read and follow the instructions on the packing of detergents.
Store these products out of the reach of children.

Always take into account the instructions on the labels of clothes.

Never allow children to play in the surroundings of a machine.

These instructions surely cannot prevent all risks of accidents. It is up to the user to act with the
utmost precaution.

Do not hesitate to contact the dealer in case of a problem.

Remark:

4

2

HW55

Technical data and dimensions

Technical data

HW55

Capacity (dry weight)

1/11 5 kg
1/10 5,5 kg
1/9 6,1 kg

Cylinder

Diameter 530 mm
Depth 250 mm
Volume 55 lit.

Cabinet

Height 1005 mm
Width 660 mm
Depth 708 mm

Front loading

Diameter door opening 300 mm
Door height 355 mm
To center 505 mm

Speed

Wash 10 - 50 tr/min
Distribution 85 tr/min
Spin 500 - 1250 tr/min

G-force

Low spin/High spin 74/462

Motor (3-phase)

4p. 1470 tr./min 550W

Drain valve

Depend-O-Drain 6/4"

Water supply

Hot + warm water 3/4"

Heating

Electrical 230/400 V 3 kW
Electrical 400V 6 kW
Steam X
Warm water (without additional heating) X
Warm water (with additional heating) X

Packing dimensions

(H x W x D) mm 1140x732x832

Weight

Net 197 kg
Gross 252 kg

5

2

HW64/72/75/94

HW 64 HW72 HW 75 HW94

Capacity (dry weight)

1/11 5,9 kg 6,6 kg 6,9 kg 8,6 kg
1/10 6,5 kg 7,3 kg 7,6 kg 9,5 kg
1/9 7,2 kg 8,1 kg 8,4 kg 10,5 kg

Cylinder

Diameter 530 mm 530 mm 530 mm 530 mm
Depth 295 mm 345 mm 345 mm 440 mm
Volume 65 Lit. 73 Lit. 76 Lit. 95 lit.

Cabinet

Height 1005 mm 1005 mm 1005 mm 1005 mm
Width 660 mm 660 mm 660 mm 660 mm
Depth 670 mm 670 mm 670 mm 770 mm

Front loading

Diameter door opening 300 mm 300 mm 300 mm 300 mm
Door height 355 mm 660 mm 355 mm 355 mm
To center 505 mm 505 mm 505 mm 505 mm

Speed

Wash 10 - 50 tr/min
Distribution 85 tr/min
Low spin 250 - 500 tr/min
High spin 500 - 1000 tr/min

G-force

Low spin/High spin 74/296

Motor (3-phase)

4p. 1470 tr./min 750W

Drain valve

Depend-O-Drain 6/4"

Water supply

Hard, soft, warm water and cool-down 3/4"

Steam connection

Steam connection 3/8"

Heating

Electrical 230/400 V 4,2/6/9 kW
Electrical 400V 12 kW
Steam X
Warm water (without additional heating) X
Warm water (with additional heating) X

Packing dimensions

(H x W x D) mm 1140x732x832 1240x732x950

Weight

Net 197 kg 210 kg 210 kg 212 kg
Gross 252 kg 265 kg 265 kg 268 kg

6

2

HW131/164

HW 131 HW 164

Capacity (dry weight)

1/11 12 kg 15 kg
1/10 13,2 kg 16,5 kg
1/9 14,5 kg 18,3 kg

Cylinder

Diameter 650 mm 650 mm
Depth 400 mm 400 mm
Volume 132 Lit. 165 Lit.

Cabinet

Height 1170 mm 1170 mm
Width 780 mm 780 mm
Depth 760 mm 860 mm

Front loading

Diameter door opening 300 mm 300 mm
Door height 455 mm 455 mm
To center 605 mm 605 mm

Speed

Wash 50 tr/min
Distribution 100 tr/min
Low spin 250--500 tr/min
High spin 500--1000 tr/min

G-force

Low spin/High spin 88/363

Motor (3-phase)

4p. 1470 tr./min 1500W

Drain valve

Depend-O-Drain 6/4"

Water supply

Hard, soft, warm water and cool-down 3/4"

Steam connection

Steam connection 3/8"

Heating

Electrical 230/400 V 12/15/18 kW
Electrical 400V 21/24 kW
Steam X
Warm water (without additional heating) X
Warm water (with additional heating) X

Packing dimensions

(H x W x D) 1310x850x1000mm 1310x850x1100mm

Weight

Net 287 kg 347 kg
Gross 349 kg 417 kg

7

2

HW55

2

A. Hard water connection 3/4"

B. Warm water connection 3/4"

C. Input electrical supply

D. Electrical connection clamps

E. Ventilation soap dispenser

F. Water drain

G. Bolt pattern for fixation of the machine

Dimensions

8

p

p

p

p

p

p

p

p

p

2

HW64/72/75/94

A. Hard water connection 3/4"

B. Warm water connection 3/4"

C. Soft water connection 3/4"

D. Output connection steam valve

E. Input electrical supply

F. Electrical connection clamps

G. Water drain

H. Steam connection

I. Ventilation soap dispenser

9

2

p

p

p

p

p

p

p

p

p

HW131/164

A. Hard water connection 3/4"

B. Warm water connection 3/4"

C. Soft water connection 3/4"

D. Output connection steam valve

E. Input electrical supply

F. Electrical connection clamps

G. Water drain

H. Steam connection

I. Ventilation soap dispenser

10

3

The machine must be placed on a flat, solid surface (metal base, concrete or solid
ground). It is recommended that the machine be anchored (bolts M10) on the
provided places (A) in the base, especially in case of a plint (see Dimensions 2).
The machine must be placed entirely level. For easy maintenance it is recommen­ded to keep a minimal distance of 600 mm between the wall and the back of the
machine.
If several machines are placed next to each another, there should be a minimal
distance of 30 mm between each machine.

To prevent damage during transportation, the machine has been
equipped with two red transport brackets (D) to eliminate every
possible movement of the tub.
After the machine has been placed level, take off the service panel
and remove these transport brackets.

Important

The machine must never be activated before removing
these transport brackets.

Removing the transport brackets

The machine is delivered with hoses with 3/4" connections. These hoses fit the
water inlet valves of the machine and the main water inlet taps. To ensure the
optimal functioning of the water inlet valves, the water pressure on the inlet
should be between 0,5 and 10 kg/cm² (7 and 145 psi). If the pressure is too low,
the cycle time will increase considerably.
In case of boiler fed machines, a minimum of hot water of 90°C should
be available: HW55: 46l. HW64: 55 l. H W 75: 65 l. H W94: 80l.

HW131: 100l. HW164: 120l.

Water connection

Water drain

The machine is equipped with a drain valve with 6/4" outer diameter (50 mm). This
drain valve should be connected to the drain by means of the drain elbow which
is delivered with the machine.

The diameter of the main drain should be adapted to the water flow and the
number of machines. It should be sufficient to handle at least 80L/min. per
machine.

It is necessary to connect the main drain at least on one side to an open air­brake to allow ventilation.

p

p

Installation and connection

Ground

Important

The bolt pattern for the fixation of the HW 55 machine is foreseen in the back
panel of the cabinet. Put this panel on the floor and indicate the holes (see page

7).