Cissell CHMW35-WE55-165 User Manual

Contents

1 General safety instructions ............................................................ 1

2 Technical data and dimensions ..................................................... 2

Technical data ................................................................................ 2

Dimensions .................................................................................... 4

3 Installation and connection ............................................................ 6

Ground ........................................................................................... 6

Anchoring ....................................................................................... 6

Water connection ........................................................................... 6

Water drain .................................................................................... 6

Main power connection .................................................................. 7

Liquid soap connection .................................................................. 8

Connection of a central operating panel for coinmachines ............ 9

Steam connection .......................................................................... 10

4 Operating instructions .................................................................... 11

Machine with start button ............................................................... 12

Machine with coin or token operation ............................................. 20

5 Standard programs ......................................................................... 25

6 Technical remarks........................................................................... 26

Internal connection of the electrical heating ................................... 26

Internal connections of the motor ................................................... 26

Thermo-magnetic motor protection ................................................ 27

Error messages .............................................................................. 27

7 Maintenance of the machine .......................................................... 29

Code: 249/00162/00

21/12/2000

Content

General safety instructions

Ignoring any of the safety instructions can cause serious
personal injury and can also cause damage to the linen or the
machine

Read the installation and instruction manual carefully before connecting the

S

machine.

It is recommended that the machine be installed by qualified technicians.

S

The machine should be installed according to the installation instructions.

S

(See chapter 4)

The machine should be grounded according to the instructions in order to

S

eliminate the risk of electrocution.

Do not expose the machine to high humidity or extreme high or low

S

temperatures.

Cut off all main water inlets, steam and electrical supplies at the end of each

S

operating day.

1

Before starting repairs or maintenance, shut off all power and water supplies.

S

To prevent fire and explosion:

S

Keep the area around the machine free from inflammable or combustible
products.
Do not put fabrics that are treated with inflammable products into the
machine. These fabrics should be hand-washed or air-dried first.

Always carefully read and follow the instructions on the packing of deter-

S

gents. Store these products out of the reach of children.

Always take into account the instructions on the labels of clothes.

S

Never allow children to play in the surroundings of a machine.

S

Remark:

These instructions surely cannot prevent all risks of accidents. It is up to the user to act with the

S

utmost precaution.

Do not hesitate to contact the dealer in case of a problem.

S

3

Technical data and dimensions

Technical data

Capacity (dry weight)

1/11 5 kg 6,6 kg 8,6 kg
1/10 5,5 kg 7,3 kg 9,5 kg
1/9 6,1 kg 8,1 kg 10,5 kg

Cylinder

Diameter 530 mm 530 mm 530 mm
Depth 295 mm 345 mm 440 mm
Volume 55 Lit. 73 Lit. 95 Lit.

Cabinet

Height 1005 mm 1005 mm 1110 mm
Width 660 mm 660 mm 660 mm
Depth 670 mm 670 mm 770 mm

Front loading

Diameter door opening 300 mm 300 mm 300 mm
Door height 360 mm 360 mm 455 mm
To center 510 mm 510 mm 605 mm

Speed

Wash 50 rpm
Spin 500 rpm

G-force

Spin 74

Motor(3 phase)

Wash 18p. 290rpm 120 W 120 W 120 W
Spin 2p. 2900 rpm 370 W 370 W 550 W

Drain valve

Depend-O-Drain 6/4"

Water supply

Hard, soft, warm water and cool-down 3/4"

Steam connection

Steam connection 3/8"

Heating

Electrical 220/380 V 4,2/6/9 kw
Electrical 380 V 12 kw
Steam X
Warm water (without additional heating) X
Warm water (with additional heating) X

Packing dimensions

(H x W x D) 1140x732x832mm (WE55/73)
1230x732x950mm (WE95)

Weight

Net 165 kg 170 kg 178 kg
Gross 220 kg 225 kg 230 kg

2

WE 55 WE 73 WE 95

4

Capacity (dry weight)

Cylinder

Cabinet

Front loading

Speed

G-force

Motor(3 phase)

Drain valve

Water supply

Steam connection

Heating

Packing dimensions

Weight

2

WE 110 WE 132 WE 165

1/11 10 kg 12 kg 15 kg
1/10 11 kg 13,2 kg 16,5 kg
1/9 12,2 kg 14,5 kg 18,3 kg

Diameter 650 mm 650 mm 650 mm
Depth 330 mm 400 mm 500 mm
Volume 110 Lit. 132 Lit. 165 Lit.

Height 1170 mm 1170 mm 1170 mm
Width 780 mm 780 mm 780 mm
Depth 760 mm 760 mm 860 mm

Diameter door opening 300 mm 300 mm 300 mm
Door height 465 mm 465 mm 465 mm
To center 615 mm 615 mm 615 mm

Wash 50 rpm
Spin 500 rpm

Spin 88

Wash 18p. 290rpm 220 W 220 W 280 W
Spin 2p. 2900 rpm 1100 W 1100 W 1300 W

Depend-O-Drain 6/4"

Hard, soft, warm water and cool-down 3/4"

Steam connection 3/8"

Electrical 220/380 V 12/15/18 kw
Electrical 380 V 21/24 kw
Steam X
Warm water (without additional heating) X
Warm water (with additional heating) X

(H x W x D) 1310x850x922mm (WE110/132)
1310x850x1022mm (WE165)

Net 230 kg 235 kg 245 kg
Gross 285 kg 290 kg 315 kg

5

DIMENSÕES

Dimensions

WE55/73/95

WE55/73/95

2

A. Hard water connection 3/4"

S

B. Warm water connection 3/4"

S

C. Soft water connection 3/4"

S

D. Electrical connection

S

E. Electrical connection clamps

S

F. Water drain

S

G. Steam connection

S

H. Ventilation soap dispenser

S

6

WE 110 / 132 / 165

2

A. Hard water connection 3/4"

S

B. Warm water connection 3/4"

S

C. Soft water connection 3/4"

S

D. Electrical connection

S

E. Electrical connection clamps

S

F. Water drain

S

G. Steam connection

S

H. Ventilation soap dispenser

S

7

Installation and connection

Surface

The machine must be securely fixed on a flat surface (metal base, concrete or
solid ground). The anchoring is to be done on the provided places (A) in the base.
(See Dimensions 2)
The machine must be placed entirely level. For easy maintenance it is recom­mended to keep a minimal distance of 600 mm between the wall and the back
of the machine.
If several machines are placed next to each another, there should be a minimal
distance of 30 mm between each machine.

Anchoring

On a metal base

3

D

E

F

D

B

C

C

G

The machines must be fixed on a metal base which is securely anchored on a
concrete base.

A: Bolt M12 (WE55/73/95), M16 (WE110/132/165)
B: Concrete base (WE55/73: 20cm, WE95/110: 30cm, WE132/165: 40cm)
C: Washer 40x17x4
D: Nut M12 (WE55/73/95), M16 (WE110/132/165)
E: Base of the machine
F: Metal base

A

Directly on the ground

The machine must be anchored directly on a concrete base.

D

E

B

A

C

A: Bolt M12 (WE55/73/95), M16 (WE110/132/165)
B: Concrete base (WE55/73: 20cm, WE95/110: 30cm, WE132/165: 40cm)
C: Washer 40x17x4
D: Nut M12 (WE55/73/95), M16 (WE110/132/165)

Water connection

The machine is delivered with hoses with 3/4" connections. These hoses fit the
water inlet valves of the machine and the main water inlet taps. To ensure the
optimal functioning of the water inlet valves, the water pressure on the inlet
should be between 0,5 and 10 kg/cm² (7 and 145 psi). If the pressure is too low,
the cycle time will increase considerably.
In case of boiler fed machines, a minimum of hot water of 90°C should be
available: For the WE55: 50 l. WE110: 90l.
For the WE73: 65 l. WE132: 120l.
For the WE95: 80 l. WE165: 140l.

8

3

Water drain

Main power connection

The machine is equipped with a drain valve with 6/4" outer diameter (50
mm). This drain valve should be connected to the drain by means of the
drain elbow which is delivered with the machine.

The diameter of the main drain should be adapted to the water flow and

S

the number of machines. It should be sufficient to handle at least 80L/
min. per machine.

It is necessary to connect the main drain at least on one side to an open

S

air-brake to allow ventilation.

Remove the cover plate at the back of the machine. (See dimensions

S

(E)).

S

Connect the power cable to the connectors.

220V 3AC

220V 3 phase (3AC) should be connected to the connectors “L1,L2,L3”.
The green/yellow grounding clamp has to be connected to the groun­ding wire “PE”.

380 V 3AC + N

Power of the breaker plugs:

380 V 3 phase (3AC + N) has to be connected to the connectors
“L1,L2,L3”, the blue neutral to the “N” connector.
The green/yellow grounding clamp has to be connected to the groun­ding wire “PE”.

After connection, check the spin direction. The cylinder must spin in

S

the direction of the arrow, showed on the sticker on the door window
(clockwise).
A wrong spin direction can damage the motor, and can also cause water
to spurt from the soap dispenser.

In case of wrong spin direction: switch the terminal clamps of the motor

S

circuit “R” and “S” of the connecting cable.

machine with steam heating or boiler fed machines without additio­nal electrical heating

220V 3AC 380V 3AC + N

16 A 16 A

machine with electrical heating

Heating: 220V 3AC 380V 3AC + N

4,2 kw 16A 16A

6 kw 16A 16A

12 kW 40 A 20 A

15 kW 50 A 25 A

18 kW 50 A 32 A

21 kW ---- 40 A

24 kW ---- 40 A

9

Liquid soap connection (option)

3

Connection of the liquid soap

hoses

Electrical connection of

the liquid soap pumps

A rubber connection has been placed over the air break opening at the back
of the machine. There are 5 holes in this rubber connection, through each
of which a liquid soap hose can be driven (S1...S5). Press the hoses until
they appear well inside the soap dispenser.
The central gap in the rubber connection remains and serves as air breaker.

On machines equipped with a liquid soap connection, connect the wires
directly on the print board next to the ground wire connection (option).
Connect as indicated on the wiring diagram.

The two connectors on the right give a tension of 220V ~ (max. 4A) which
can be applied to drive 220V ~ soap pumps. If more than 4A is required,
an external tension will have to be used. 6 connections have been
provided, of which one (S6) can be used to drive a waterproofing pump
(e.g. for rain coats, etc.).

The 220V can be transformed to other values to drive other type soap
pumps.

Example: pumps 24V ~.

Also, pumps with different operating tension can be combined.

Example: 5 pumps 220V ~ and 1 pump 24V ~.

With an external tension 24V DC

10