Cisco WAP125 User Manual

Page 1
Data sheet
© 2017 Cisco and /or its affiliates. All r ights res erved. This docu ment is Cisco Pub lic Infor mation . Page 1 of 9
Cisco public
Cisco WAP125 Wireless-AC Dual Band Desktop Access Point with PoE
Highlights
Provides cost-effective 802.11ac/n connectivity for 2.4-GHz and 5-GHz clients with speeds up to 867 Mbps
Gigabit Ethernet LAN interface with Power over Ethernet (PoE) enables flexible installation
A captive portal provides highly secure guest access with customized roles and rights
Works right out of the box with easy installation and a simple web-based configuration wizard
Supported by the new Cisco® FindIT Network Management platform for easy management and control
Provides peace of mind with a limited lifetime hardware warranty
Product overview
In today’s dynamic business environment, employees are becoming more mobile and collaborative than ever. To stay productive, they need
dependable, business-class access to network applications throughout the office. The Cisco WAP125 Wireless-AC Dual Band Desktop Access Point with PoE provide a simple, cost-effective way to extend secure, high-performance mobile networking to your employees and guests, so
they can stay connected anywhere in the office. This flexible solution lets you connect dozens of employees, and can scale to accommodate
additional users and changing business needs.
The WAP125 access point uses concurrent dual-band radios for improved coverage on mobile devices. A Gigabit Ethernet LAN interface with PoE supports flexible installation and can reduce cabling and wiring costs. Intelligent Quality-of-Service (QoS) features let you prioritize
bandwidth-sensitive traffic for Voice over IP (VoIP) and video applications.
To provide highly secure guest access to visitors and other users, the WAP125 access point supports a captive portal with multiple
authentication options and the ability to configure rights, roles, and bandwidth. A customized guest login page lets you present a welcome
message and access details, and reinforces your brand with company logos.
The WAP125 access point is easy to set up and use, with intuitive wizard-based configuration to get you up and running in minutes. An
attractive, compact design with integrated stand allows the access point to be placed on a desk or other flat surface.
To enhance reliability and safeguard sensitive business information, the WAP125 access point supports both Wi -Fi Protected Access (WPA)
Personal and Enterprise, encoding all your wireless transmissions with powerful encryption. In addition, 802.1X RADIUS authentication helps
keep unauthorized users out.
The WAP125 access point offers a captive portal for guest access, allowing you to control Internet access for guests and give your customers
a better experience.
Page 2
Data sheet
© 2017 Cisco and /or its affiliates. All r ights res erved. This docu ment is Cisco Pub lic Infor mation . Page 2 of 9
Cisco public
Figure 1 shows a typical wireless access point configuration. Figures 2 and 3 show the product’s front and back panels, respectively.
Figure 1. Typical wireless access point configuration
Figure 2. Front panel
Page 3
Data sheet
© 2017 Cisco and /or its affiliates. All r ights res erved. This docu ment is Cisco Pub lic Infor mation . Page 3 of 9
Cisco public
Figure 3. Back panel
Features
The single radio supports both 5 GHz and 2.4 GHz, with speeds up to 867 Mbps for increased capacity and coverage
The Gigabit Ethernet LAN interface can enable a high-speed uplink to the wired network
Robust security, including WPA2, 802.1X with RADIUS secure authentication, and rogue access point detection, helps protect
sensitive business information
A captive portal supports secure, customized guest access with multiple rights and roles
Simple installation and an intuitive web-based configuration wizard enable fast, simple deployment and setup in minutes
Support for PoE makes installation easy without expensive additional wiring
Sleek design with multiple internal antennas and integrated stand
Intelligent QoS prioritizes network traffic to help keep critical network applications running at top performance
Workgroup Bridge mode lets you expand your network by wirelessly connecting to a second Ethernet network
Support for IPv6 lets you deploy future networking applications and operating systems without costly upgrades
Support for Cisco FindIT Network Management platform offers easy management and control
Limited lifetime hardware warranty provides peace of mind
Page 4
Data sheet
© 2017 Cisco and /or its affiliates. All r ights res erved. This docu ment is Cisco Pub lic Infor mation . Page 4 of 9
Specifications
Description
Standards
IEEE 802.11ac, 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (Security Authentication), 802.1Q (VLAN),
802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460)
Cabling type
Category 5e or better
Antennas
Internal antennas optimized for installation on desktop
Led indicators
1 multifunction LED
Operating system
Linux
Physical Interfaces
Ports
10/100/1000 Ethernet, with support for 802.3af /at PoE, power port for AC adapter (included)
Power supply
External 12V/1A DC power jack (Energy Star 2.0 compliant with Efficiency Level 6) and 802.3af/at PoE
Buttons
Reset button, power on/off push button
Lock slot
Slot for Kensington lock
LEDs
1 LED
Physical Specifications
Physical dimensions (W x D x H)
4.85 x 4.85 x 1.25 in. (123 x 123 x 31 mm)
Weight
0.67 lb (303 g)
Network Capabilities
VLAN support
Yes
Number of VLANs
1 management VLAN plus 8 VLANs for SSIDs
802.1X supplicant
Yes
SSID-to-VLAN mapping
Yes
Auto-channel selection
Yes
Spanning tr ee
Yes
Load balancing
Yes
IPv6
Yes
IPv6 host s upport
IPv6 RADIUS, syslog, Network Time Protocol (NTP)
Layer 2
802.1Q-based VLANs, 8 active VLANs plus 1 management VLAN
Security
WPA/WPA2
Yes, including enterprise authentication
Access contro l
Yes, management Access Control List (ACL) plus MAC ACL
Secure management
HTTPS
SSID broadcast
Yes
Rogue access point detection
Yes
Mounting and Physical Security
Mounting o ptions
Desktop
Physical security lock
Kensington lock slot
Quality of Service
QoS
Wi-Fi Multimedia and Traffic Specification (WMM TSPEC), client QoS
Performance
Wireless throughput
Up to 867-Mbps data rate (real-world throughput will vary)
Cisco public
Specifications
Table 1 lists the specifications, package contents, and minimum requirements for the WAP125 access point. Table 2 lists the a ccess point’s RF
performance.
Table 1. Specifications
Page 5
Data sheet
© 2017 Cisco and /or its affiliates. All r ights res erved. This docu ment is Cisco Pub lic Infor mation . Page 5 of 9
Specifications
Description
Recommend ed user suppor t
Up to 64 connective users, 10 active users
Configuration
Web user interface
Built-in web user interface for easy browser-based configuration (HTTP, HTTPS)
Management
Management pro tocols
Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour
Remote management
Yes
Event logging
Local, remote syslog, email alerts
Network diagnostics
Logging and packet capture
Web firmware upgrade
Firmware upgradable through web browser, imported or exported configuration file
Dynamic Host Configuration Protocol (DHCP)
DHCP client
IPv6 host
Yes
HTTP redirect
Yes
Wireless
Frequency
Dual bands (2.4 and 5 GHz)
Radio technol ogies
802.11b: Direct-Sequence Spread-Spectrum (DSSS)
802.11a/g/n/ac: Orthogonal Frequency Division Multiplexing (OFDM)
Modulation types
802.11b: BPSK, QPSK, CCK
802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
WLAN
802.11ac/n 2x2 Multiple-Input Multiple-Output (MIMO) with 2 spatial streams at 5 GHz 2x2 MIMO with 2 spatial streams at 2.4 GHz 20-, 40-, and 80-Mhz channels for 802.11ac 20 and 40 MHz for 802.11n PHY data rate up to 867Mbps
Data rates suppor ted
802.11a/b/g:
54, 48, 36, 24 , 18, 12, 9, 6, 11, 5.5, 2, and 1 Mbps
8 02.11n: 6.5 to 30 0 Mbps
20-MHz bandwidth: MCS 0-15 for supported data rates 40-MHz bandwidth: MCS 0 -15 for s upported data rates
8 02.11ac: 6.5 to 86 7 Mbps
20-MHz bandwidth: MCS 0-9 for suppo rted data rates 40-MHz bandwidth: MCS 0 -9 for su pported data rates 80-MHz bandwidth: MCS 0 -9 for su pported data rates
Frequency band and op erating channels
A/C Regulatory Dom ain
2 .412 to 2.462 GHz; 11 channels
5.180 to 5.240 GHz; 4 channels
5.745 to 5.825 GHz; 5 channels
E/J Regulatory Domain:
2 .412 to 2.472 GHz; 13 channels
5.180 to 5.240 GHz; 4 channels
K Regulatory Domain:
2 .412 to 2.472 GHz; 13 channels
5.180 to 5.240 GHz; 4 channels
5.745 to 5.805 GHz; 4 channels
Non-over lapping channels
2.4 GHz
8 02.11b/g
20 MHz: 3
8 02.11n
20 MHz: 3
5 GHz
8 02.11a
20 MHz: 9
8 02.11n
20 MHz: 9 40 MHz: 4
8 02.11ac
20 MHz: 9 40 MHz: 4 80 MHz: 2
Cisco public
Page 6
Data sheet
© 2017 Cisco and /or its affiliates. All r ights res erved. This docu ment is Cisco Pub lic Infor mation . Page 6 of 9
Specifications
Description
Wireless isolation
Wireless isolation between clients
External antenn as
None
Inter nal antennas
Internal Fixed Planar Inverted-F Antenna (PIFA)
Antenna gain In dBi
Maximum antenna gain of 4.02 dBi on 2.4 GHz Maximum antenna gain of 5.63 dBi on 5 GHz
Wireless Distribution System (WDS)
Yes
Fast roaming
Yes
Multiple SSIDs
8
Wireless VLAN m ap
Yes
WLAN security
Yes
Wi-Fi Multimedia (WMM)
Yes, with unscheduled automatic power save
Operating Modes
Access point
Access Point mode, WDS Bridging, Workgroup Bridge mode
Enviro nmental
Power op tions
IEEE 802.3af Ethernet switch Cisco Power Injector: SB-PWR-INJ2-xx AC adapter included, 12V/1A POE peak power: 6.5W
Compliance
Safety:
UL 609 50-1
CAN/CSA-C22.2 No. 60950-1
IEC 60 950-1
EN 6 0950-1
Radio approvals:
FCC Part 15.247, 15.407
RSS-210 (Canada)
EN 30 0.328, EN 301.893 (Europe)
AS/NZS 42 68.2003 (Australia and New Zealand)
EMI and susceptibility (Class B):
FCC Part 15.107 and 15.109
ICES-003 (Canada)
EN 30 1.489-1 and -17 ( Europe)
Operating temperature
0° to 40°C (32° to 104°F)
Stor age temperature
-20° to 70°C (-4° to 158°F)
Operating humidity
10% to 85% noncondensing
Stor age humidity
5% to 90% noncondensing
System memory
256 MB RAM 128 MB flash
Package Contents
WAP125 Wireless-AC/N Du al Band Desktop Access Point
Power adapter 12V/1A
Quick-start guide
Ethernet network cable
Minimum Requirements
Switch/router with PoE supp ort, PoE injector, or AC po wer adapter
Web-based configuration: Web browser
Warranty
Access point
Limited lifetime
Cisco public
Page 7
Data sheet
© 2017 Cisco and /or its affiliates. All r ights res erved. This docu ment is Cisco Pub lic Infor mation . Page 7 o f 9
Maximum Transmit Power (dBm) Per Chain
Receiver Sensitivity (dBm) Per Chain
2.4 GHz – 802.11b
1 Mbps
18.0 +/- 1.5
-96.0
11 Mbps
18.0 +/- 1.5
-88.0
2.4 GHz – 802.11g
6 Mbps
18.0 +/- 1.5
-92.0
54 Mbps
17.0 +/- 1.5
-75.0
2.4 GHz – 802.11n HT20
MCS0/8
18.0 +/- 1.5
-92.0
MCS7/15
17.0 +/- 1.5
-73.0
2.4 GHz – 802.11n HT40
MCS0/8
17.0 +/- 1.5
-90.0
MCS7/15
16.0 +/- 1.5
-71.0
5 GHz – 802.11a
6 Mbps
17.0 +/- 1.5
-90.0
54 Mbps
15.0 +/- 1.5
-73.0
5 GHz – 802.11n HT20
MCS0/8
17.0 +/- 1.5
-90.0
MCS7/15
14.0 +/- 1.5
-71.0
5 GHz – 802.11n HT40
MCS0/8
17.0 +/- 1.5
-88.0
MCS7/15
14.0 +/- 1.5
-69.0
5 GHz – 802.11ac HT20
MCS0
17.0 +/- 1.5
-90.0
MCS8
12.0 +/- 1.5
-67.0
5 GHz – 802.11ac HT40
MCS0
17.0 +/- 1.5
-88.0
MCS9
12.0 +/- 1.5
-63.0
5 GHz – 802.11ac HT80
MCS0
17.0 +/- 1.5
-85.0
MCS9
12.0 +/- 1.5
-60.0
Cisco public
Table 2. RF performance
Note: This table shows the maximum capability of the hardware. The transmit power may be reduced to comply with local regulatory
requirements.
Page 8
Data sheet
© 2017 Cisco and /or its affiliates. All r ights res erved. This docu ment is Cisco Pub lic Infor mation . Page 8 of 9
Part Number
Description
WAP125-A-K9 -NA
Cisco WAP125 Wireless-AC/N Dual Band Desktop Access Point with PoE (United States, Canada, Colombia, Mexico)
WAP125-B-K9-BR
Cisco WAP125 Wireless-AC/N Dual Band Desktop Access Point with PoE (Brazil)
WAP125-A-K9 -AR
Cisco WAP125 Wireless-AC/N Dual Band Desktop Access Point with PoE (Argentina)
WAP125-A-K9 -AU
Cisco WAP125 Wireless-AC/N Dual Band Desktop Access Point with PoE (Australia, New Zealand)
WAP125-E-K9 -EU
Cisco WAP125 Wireless-AC/N Dual Band Desktop Access Point with PoE (EU Regions, Philippines, Thailand, Vietnam, South Africa, Chile)
WAP125-E-K9 -UK
Cisco WAP125 Wireless-AC/N Dual Band Desktop Access Point with PoE (United Kingdom, Saudi Arabia, UAE, Hong Kong, Singapore, Malaysia)
WAP125-E-K9 -IN
Cisco WAP125 Wireless-AC/N Dual Band Desktop Access Point with PoE (India)
WAP125-C-K9 -CN
Cisco WAP125 Wireless-AC/N Dual Band Desktop Access Point with PoE (China)
WAP125-K-K9-KR
Cisco WAP125 Wireless-AC/N Dual Band Desktop Access Point with PoE (Korea)
Cisco public
Signal Coverage Patterns
Radiation Pattern for 2.4GHz Antennas
Radiation Pattern for 5GHz Antennas
Ordering information
Table 3 shows the product part numbers and descriptions to make ordering easier.
Table 3. Ordering information
Cisco limited lifetime warranty for cisco small business products
This Cisco Small Business product comes with a limited lifetime hardware warranty. Product warranty terms and other information
applicable to Cisco products are available at http://www.cisco.com/go/warranty.
Page 9
Data sheet
© 2017 Cisco and /or its affiliates. All r ights res erved. This docu ment is Cisco Pub lic Infor mation . Page 9 of 9
Cisco public
Cisco small business support service
This optional service offers affordable, 3-year peace-of-mind coverage. This subscription-based, device-level service helps you protect your
investment and derive maximum value from Cisco Small Business products. Delivered by Cisco and backed by your trusted partner, this
comprehensive service includes software updates, extended access to the Cisco Small Business Support Center, and expedited hardware
replacement, should it be required.
Cisco capital
Financing to help you achieve your objectives
Cisco Capital® can help you acquire the technology you need to achieve your objectives and stay competitive. We can help you reduce CapEx. Accelerate your growth. Optimize your investment dollars and ROI. Cisco Capital financing gives you flexibility in acquiring hardware,
software, services, and complementary third-party equipment. And there’s just one predictable payment. Cisco Capital is available in more
than 100 countries. Learn more.
For more information
For more information on Cisco Small Business products and solutions, visit http://www.cisco.com/smallbusiness or
http://www.cisco.com/go/wap100.
Loading...