Page 1
Introducing Cisco VT Camera II 1
Getting Started 1
Cisco VT Camera II Package 2
Installation Requirements 2
Installing your Cisco VT Camera II 3
Installation Sequence 4
How to Set Up the Cisco VT Camera II 5
How To Install the Cisco VT Camera II 7
Using Your Cisco VT Camera II 8
Cisco VT Camera II Features 9
Using Cisco Video Telephony Applications 10
Using Cisco VT Camera II with Cisco Unified Video Advantage 10
Using Cisco VT Camera II with Cisco Unified Personal Communicator 11
Regulatory Compliance and Safety Information 11
Cisco One-Year Limited Hardware Warranty Terms 18
Page 2
Page 3
Introducing Cisco VT Camera II
Congratulations on your purchase of Cisco VT Camera II. Cisco VT Camera
II is a camera for use with Cisco Unified Video Advantage or Cisco Unified
Personal Communicator. These applications allow you to add video to your
communications.
This guide provides information and instructions for the Cisco VT Camera II.
It includes these topics:
• Getting Started
• Installing your Cisco VT Camera II
• Using Your Cisco VT Camera II
• Using Cisco Video Telephony Applications
• Regulatory Compliance and Safety Information
• Cisco One-Year Limited Hardware Warranty Terms
Getting Started
Check your Cisco VT Camera II package and verify installation requirements
before you begin the installation.
Quick Start Guide for Cisco VT Camera II
1
Page 4
Cisco VT Camera II Package
Review the following list to make sure you have received all the necessary
items to install your Cisco VT Camera II.
• 1 Cisco VT Camera II with attached USB cable
• 1 flexible camera base
• 1 privacy shade
• this Quick Start Guide for Cisco VT Camera II
See Figure 1 in the “How to Set Up the Cisco VT Camera II” section on
page 5 for an illustration of the Cisco VT Camera II components and
connections. If you are missing any items, contact your system administrator
before continuing with the installation.
Installation Requirements
Installation requirements may vary depending upon whether you are using
your Cisco VT Camera II with Cisco Unified Video Advantage or
Cisco Unified Personal Communicator.
For the latest information about supported phone models and minimum PC
requirements, consult the user guide for your product or contact your system
administrator.
2
78-16026-04
Page 5
If you are a system administrator or technician, information about
Cisco Unified Video Advantage network, PC, and other requirements is
provided in the Cisco Unified Video Advantage Administration Guide,
available at this URL:
http://www.cisco.com/en/US/products/sw/voicesw/ps5662/tsd_products_su
pport_series_home.html
If you are a system administrator or technician, information about Cisco
Unified Personal Communicator network, PC, and other requirements is
provided in the Release Notes for Cisco Unified Personal Communicator
available at this URL:
http://www.cisco.com/en/US/products/ps6844/tsd_products_support_series
_home.html
Caution Connect the Cisco VT Camera II only to a certified USB port.
Installing your Cisco VT Camera II
Make sure you have read the “Getting Started” section on page 1 before you
begin installing your Cisco VT Camera II.
Quick Start Guide for Cisco VT Camera II
3
Page 6
Installation Sequence
You must follow this sequence when installing Cisco VT Camera II:
1. First, remove the Cisco VT Camera II parts from the packaging and set
up the camera. See the “How to Set Up the Cisco VT Camera II” section
on page 5.
2. Second, install the software for the product with which you intend to use
your Cisco VT Camera II. See the “How To Install the
Cisco VT Camera II” section on page 7.
Caution Do not connect the Cisco VT Camera II to your PC unless
prompted to do so during the software installation. If you are
not prompted to connect during installation, wait until after
software installation is complete to connect the
4
Cisco VT Camera II to your PC.
78-16026-04
Page 7
How to Set Up the Cisco VT Camera II
Your system administrator or a technician will likely set up the
Cisco VT Camera II. If that is not the case, setting up your camera is easy.
See Figure 1, and the steps that follow.
Figure 1 Cisco VT Camera II Components and Connections
3
5
2
6
1
4
Quick Start Guide for Cisco VT Camera II
141719
5
Page 8
1 Cisco VT Camera II 4 Flexible camera base
2 USB cable and connector 5 Opening on the bottom of the
camera
3 Privacy shade (attaches to the
camera)
6 Tab on the flexible camera base
(snaps into the opening on the
bottom of the camera)
Procedure
1. Remove the camera, privacy shade, and the flexible camera base from
the packaging.
2. Mount the camera on the flexible camera base:
a. Insert the protruding black plastic tab on the camera base into the
opening on the bottom of the camera.
b. Snap the camera into place.
The camera will then be firmly connected to the flexible camera base.
3. Attach the privacy shade to the camera.
4. Position the camera on top of your PC monitor or flat panel screen,
adjusting the flexible camera base as necessary. See Figure 2.
6
78-16026-04
Page 9
Figure 2 Cisco VT Camera II Placed on PC Monitor
105777
5. Now go to the “How To Install the Cisco VT Camera II” section on
page 7.
How To Install the Cisco VT Camera II
Installation of Cisco VT Camera II occurs during the installation process for
the software with which you intend to use the camera. Because installation
procedures will vary depending on whether you are using Cisco VT Camera
Quick Start Guide for Cisco VT Camera II
7
Page 10
II with Cisco Unified Video Advantage or Cisco Unified Personal
Communicator, see the user guide for procedural information about the
installation process.
Your system administrator will likely provide you with instructions about
how to obtain the software and user guide for Cisco Unified
Video Advantage or Cisco Unified Personal Communicator. If you did not
receive those instructions, contact your system administrator.
Caution Do not connect the Cisco VT Camera II to your PC unless
prompted to do so during the installation. If you are not
prompted to connect during installation, wait until after
software installation is complete to connect the
Cisco VT Camera II to your PC.
For more information see the “Using Your Cisco VT Camera II” section on
page 8.
Using Your Cisco VT Camera II
The camera is designed for optimal eye contact when placed on top of your
PC monitor or flat panel screen. You might want to try out several different
positions.
8
78-16026-04
Page 11
Cisco VT Camera II Features
Figure 3 shows the features of your Cisco VT Camera II.
Figure 3 Cisco VT Camera II Features
1
2
4
3
1 Privacy shade 3 Flexible base
2 Activity light 4 Lens
Quick Start Guide for Cisco VT Camera II
141718
9
Page 12
Place the camera in the middle of your PC monitor or flat panel screen, or on
a table top, for optimal eye contact. Lift up the privacy shade.
• Pivot the camera up or down, left or right, for the best position.
• To learn how to adjust various settings for your Cisco VT Camera II,
such as brightness and contrast, refer to the user documentation for the
software product with which you are using the camera.
Using Cisco Video Telephony Applications
The Cisco VT Camera II is for use with Cisco Unified Video Advantage and
Cisco Unified Personal Communicator.
Using Cisco VT Camera II with Cisco Unified
Video Advantage
Cisco Unified Video Advantage is easy to use and online help is available
from the user interface. For complete information, refer to the Cisco Unified
Video Advantage User Guide available online at:
http://www.cisco.com/en/US/products/sw/voicesw/ps5662/products_user_g
uide_list.html
10
78-16026-04
Page 13
Using Cisco VT Camera II with Cisco Unified
Personal Communicator
Cisco Unified Personal Communicator is easy to use and online help is
available from the user interface. For complete information, refer to the Cisco
Unified Personal Communicator User Guide available online at:
http://www.cisco.com/en/US/products/ps6844/tsd_products_support_series
_home.html
Regulatory Compliance and Safety
Information
This section describes the regulatory compliance and safety information for
the Cisco VT Camera II.
Regulatory Compliance
The Cisco VT Camera II meets the following regulatory compliance and
safety standards:
Quick Start Guide for Cisco VT Camera II
11
Page 14
Specification Description
Regulatory
Compliance
Products shall bear CE Marking indicating
compliance with the 89/366/EEC and 73/23/EEC
directives, which includes the following safety and
EMC standards.
Safety UL UL 60950
CAN/CSA-C22.2 No. 60950
EN 60950
IEC 60950
AS/NZS 60950
12
78-16026-04
Page 15
Specification Description
EMC FCC Part 15 (CFR 47) Class B
ICES-003 Class B
EN55022 Class B
CISPR22 Class B
AS/NZS CISPR22 Class B
CISPR24
VCCI Class B
EN55024
EN50082-1
EN61000-6-1
EN61000-3-2
EN61000-3-3
Quick Start Guide for Cisco VT Camera II
13
Page 16
FCC Class B Compliance
This equipment has been tested and found to comply with the limits for a
Class B Device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generated, uses and can radiate radio
frequency and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
[cfr reference 15.105]
14
78-16026-04
Page 17
Canada Class B Notice
This Class ‘B’ digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe ‘B’ est conforme à la norme NMB-003
du Canada.
Korea Class B Notice
Warning
This is a Class B Device and is registered for EMC
requirements for residential use. This device can be used not
only in residential areas but in all other areas.
Quick Start Guide for Cisco VT Camera II
15
Page 18
Declaration of Conformity for the European Community,
Switzerland, Norway, Iceland, Romania, and Liechtenstein
With regard to Directives 73/23/EEC and 89/336/EEC, as amended by
Directive 93/68/EEC
English: This equipment is in compliance with the essential
requirements and other provisions of Directives 73/23/EEC and
89/336/EEC as amended by Directive 93/68/EEC.
Dansk: Dette udstyr er i overensstemmelse med de ufravigelige hensyn
og andre bestemmelser i direktiv 73/23/EEC og 89/336/EEC som
ændred i direktiv 93/68/EEC.
Deutsch: Dieses Gerät entspricht den wesentlichen Anforderungen und
weiteren Bestimmungen der Richtlinien 73/23/EWG und
89/336/EWG mit der Ergänzung durch Richtlinie 93/68/EWG.
Español: Este equipo cumple con los requisitos esenciales y otras
disposiciones de las Directrices 73/23/EEC y 89/336/EEC de
acuerdo a las modificaciones de la Directriz 93/68/EEC.
16
78-16026-04
Page 19
Français: Cet appareil remplit les principales conditions requises et
autres dispositions des Directives 73/23/EEC et 89/336/EEC,
modifiées par la Directive 93/68/EEC.
Íslenska: Þessir búnaður samrýmist lögboðnum kröfum og öðrum
ákvæðum tilskipana 73/23/EBE og 89/336/EBE, með breytingum
skv. tilskipun 93/68/EBE.
Italiano: Questa apparecchiatura è conforme ai requisiti essenziali e
altre disposizioni delle Direttive 73/23/EEC e 89/336/EEC
modificate con la Direttiva 93/68/EEC.
Nederlands: Deze apparatuur voldoet aan de belangrijkste eisen en andere
voorzieningen van richtlijnen 73/23/EEC en 89/336/EEC zoals
gewijzigd door richtlijn 93/68/EEC.
Norsk: Dette utstyret samsvarer med de vesentligste kravene og andre
regler i direktivene 73/23/EEC og 89/336/EEC samt i
tilleggsdirektiv 93/68/EEC.
Português: Este equipamento satisfaz os requisitos essenciais e outras
provisões das Directivas 73/23/EEC e 89/336/EEC, conforme
amendados pela Directiva 93/68/EEC.
Quick Start Guide for Cisco VT Camera II
17
Page 20
Cisco VT Camera II
Suomalainen: Tämä laite on direktiivien 73/23/ETY ja 89/336/ETY (kuten
muutettu direktiivissä 93/68/ETY) keskeisten vaatimusten ja
määräysten mukainen.
Svenska: Denna utrustning uppfyller de väsentliga kraven och andra
villkor i direktiven 73/23/EEC och 89/336/EEC enligt ändringarna i
direktiv 93/68/EEC.
Cisco One-Year Limited Hardware
Warranty Terms
There are special terms applicable to your hardware warranty and various
services that you can use during the warranty period. Your formal Warranty
Statement, including the warranties and license agreements applicable to
18
78-16026-04
Page 21
Cisco software, is available on Cisco.com. Follow these steps to access and
download the Cisco Information Packet and your warranty and license
agreements from Cisco.com.
1. Launch your browser, and go to this URL:
http://www.cisco.com/univercd/cc/td/doc/es_inpck/cetrans.htm
The Warranties and License Agreements page appears.
2. To r ea d t he Cisco Information Packet, follow these steps:
a. Click the Information Packet Number field, and make sure that
the part number 78-5235-03B0 is highlighted.
b. Select the language in which you would like to read the document.
c. Click Go.
The Cisco Limited Warranty and Software License page from the
Information Packet appears.
d. Read the document online, or click the PDF icon to download and
print the document in Adobe Portable Document Format (PDF).
Note You must have Adobe Acrobat Reader to view and print
PDF files. You can download the reader from Adobe’s
website: http://www.adobe.com
Quick Start Guide for Cisco VT Camera II
19
Page 22
3. To read translated and localized warranty information about your
product, follow these steps:
a. Enter this part number in the Warranty Document Number field:
78-10747-01C0
b. Select the language in which you would like to view the document.
c. Click Go.
The Cisco warranty page appears.
d. Read the document online, or click the PDF icon to download and
print the document in Adobe Portable Document Format (PDF).
You can also contact the Cisco service and support website for assistance:
http://www.cisco.com/public/Support_root.shtml.
Duration of Hardware Warranty
One (1) Year
Replacement, Repair, or Refund Policy for Hardware
Cisco or its service center will use commercially reasonable efforts to ship a
replacement part within ten (10) working days after receipt of a Return
Materials Authorization (RMA) request. Actual delivery times can vary,
depending on the customer location.
20
78-16026-04
Page 23
Cisco reserves the right to refund the purchase price as its exclusive warranty
remedy.
To Receive a Return Materials Authorization (RMA) Number
Contact the company from whom you purchased the product. If you
purchased the product directly from Cisco, contact your Cisco Sales and
Service Representative.
Complete the information below, and keep it for reference.
Company product purchased from
Company telephone number
Product model number
Product serial number
Maintenance contract number
Quick Start Guide for Cisco VT Camera II
21
Page 24
22
78-16026-04
Loading...