Introducing Cisco Catalyst 4500 Series Supervisor Engine II-Plus-10GE
and Cisco Catalyst 4500 Series 48-Port 100BASE-X SFP Line Card
Cisco Catalyst 4500 Series Supervisor Engine II-Plus-10GE
Cisco Systems® is pleased to internally announce the Cisco® Catalyst® 4500 Series Supervisor Engine II-Plus-10GE (Figure 1).
The Supervisor Engine II-Plus-10GE complements the Catalyst 4500 Series Supervisor Engine portfolio by delivering 10-Gigabit Ethernet
capability in an enhanced Layer 2 supervisor engine. The Supervisor Engine II-Plus-10GE is equipped with both Gigabit (Small Form-Factor
Pluggable [SFP]) and line-rate 10-Gigabit (X2) ports, providing 10-Gigabit scalability and an easy and cost-efficient migration to 10-Gigabit
Ethernet. The Supervisor Engine II-Plus-10GE provides 108 Gbps of nonblocking enhanced Layer 2 switching and 81-million packets-persecond (mpps) throughput with basic Layer 3 and Layer 4 intelligent services. It helps enable resilient, multilayer switching solutions for
converged data, voice, and video networks. The Supervisor Engine II-Plus-10GE is designed with ample performance and resources to allow
customers to deploy networkwide intelligent services, such as advanced quality of service (QoS), advanced security, and management features
without impacting switching performance. Compatible with the widely deployed Cisco Catalyst 4503, Catalyst 4506, and Catalyst 4507R
chassis as well as existing Catalyst 4500 Series line cards, the Supervisor Engine II-Plus-10GE provides investment protection while
extending the deployment of the modular Cisco Catalyst 4500 Series.
Figure 1
Cisco Catalyst 4500 Series Supervisor Engine II-Plus-10GE
The Supervisor Engine II-Plus-10GE is ideal for enterprises and medium-sized businesses that require secure, high-performance connectivity
with maximum uptime in the LAN access layer. It is also well suited for DSLAM aggregation in Metro Ethernet environments. All four Gigabit
and both 10-Gigabit ports are active and may be used concurrently.
Orderability for the new Cisco Catalyst 4500 Series Supervisor Engine II-Plus-10GE is planned for November 1, 2005. Volume shipments are
expected to begin in December.
Cisco Catalyst 4500 Series 48-Port 100BASE-X SFP Line Card
The Cisco Catalyst 4500 Series 48-Port 100BASE-X Line Card (Figure 2) provides customers the ability to combine various SFP optics, based
on the network need. One to forty-eight 100BASE-X SFP optics can be populated on a single line card. 100BASE-X SFP optic bundles are also
available, details are included in the product overview section. This nonblocking line card is compatible with any Cisco Catalyst 4500 Series
chassis.
Figure 2
Cisco Catalyst 4500 Series 48-Port 100BASE-X SFP Line Card
Orderability for the new line card is planned for November 3, 2005.
The Cisco Catalyst 4500 Series Supervisor Engine II-Plus-10GE provides investment protection and an enhanced Layer 2 upgrade path to 10
Gigabit Ethernet. It includes dual wire-speed 10-Gigabit Ethernet ports (X2 optics) as well as 4 Gigabit Ethernet ports (SFP optics) on the
faceplate. Both the 10-Gigabit X2 interfaces and the Gigabit SFP interfaces can be enabled simultaneously for maximum flexibility and
scalability, providing an easy migration path from Gigabit Ethernet to 10-Gigabit Ethernet. The Supervisor Engine II-Plus-10GE SDRAM is
also optionally expandable from 256 MB to 512 MB for further scalability. The Supervisor Engine II-Plus-10GE is an enhanced Layer 2
supervisor engine. For customers requiring full Layer 3 Enhanced Routing Protocol support with routing tables four times larger and double the
QoS/Security table size, the Catalyst 4500 Series Supervisor Engine V-10GE is the appropriate choice.
Key features of the Supervisor Engine II-Plus-10GE include:
• Wire-speed performance for 1-Gigabit and 10-Gigabit connectivity
– 108-Gbps switching fabric with 81-mpps forwarding rate for enhanced Layer 2
• Supervisor engine redundancy for nonstop operation
– Stateful Switchover (SSO) support for subsecond failover
• Robust security
– Protection against man-in-the-middle and IP spoofing attacks
– Port, router, and VLAN access control lists (ACLs)
– Network Admission Control Phase 2 support
– Secure Shell (SSH) Protocol Version 1 and 2
– Simple Network Management Protocol Version 3 (SNMPv3) for secure remote access and network management
• Comprehensive management
– Dedicated 10/100 console port and dedicated 10/100/1000 management port
– Remote in-band management via SNMP
Cisco Catalyst 4500 Series Supervisor Engine Portfolio Positioning
The Cisco Catalyst 4500 Series Supervisor Engine II-Plus-10GE complements the Cisco supervisor engine product portfolio. Customers are
provided clear choices based on their feature and scalability requirements. The enhanced Layer 2 Gigabit supervisor engines (Supervisor
Engine II-Plus, Supervisor Engine II-Plus-TS) have a clear migration path to an enhanced Layer 2 10-Gigabit supervisor engine (Supervisor
Engine II-Plus-10GE) or to a Layer 3 supervisor engine (Supervisor Engine IV). The Layer 3 Gigabit Supervisor Engine IV can migrate to the
Layer 3 10-Gigabit Supervisor Engine V-10GE. Similarly, there is a clear migration path from the enhanced Layer 2 Supervisor Engine II Plus10-GE to the Layer 3 Supervisor Engine V-10GE (Figure 3). This migration path is made smoother with the proven investment protection of
the Catalyst 4500 Series architecture. Customers can upgrade all the capabilities of all switch ports by merely upgrading the supervisor engine,
protecting their chassis, line card, and power supply investment.
Figure 3
Cisco Catalyst 4500 Series Supervisor Engine Upgrade Path
Cisco Catalyst 4500 Series 48-Port 100BASE-X SFP Line Card
The Cisco Catalyst 4500 Series 48-port, nonblocking, 100BASE-X line card allows customers to combine various SFP optics based on the
network need. One to forty-eight 100BASE-X SFP optics can be populated on a single line card, as 100BASE-X SFP optics are optional.
Customers can take advantage of the line card’s flexibility, which provides:
• SFP optics support, including 100BASE-FX, 100BASE-LX10, 100BASE-BX-D, and 100BASE-BX-U
• A flexible alternative to the Cisco Catalyst 4500 Series fixed 100BASE-X line cards
• Enterprise and commercial applications: For server farms and fiber-to-the-desktop
• Metro Ethernet: For service providers running point-to-point Fast Ethernet to the home or business
Based on the same line card, customers also have the following ordering options:
• No SFP optics included (WS-X4248-FE-SFP)
• 24 unit bundle of 100BASE-FX SFP optics
• 48 unit bundle of 100BASE-FX SFP optics
• 48 unit bundle of 100BASE-LX10 SFP optics
• 48 unit bundle of 100BASE-BX-D SFP optics
• Individual 100BASE-FX SFP optics
• Individual 100BASE-LX10 SFP optics
• Individual 100BASE-BX-D SFP optics
Product Numbers
Part numbers for the Cisco Catalyst 4500 Series Supervisor Engine II-Plus-10GE and 48-Port 100BASE-X SFP Line Card are as follows:
MEMC4K-U512D-SDRAM 512-MB SDRAM Factory Upgrade
MEMC4K-512D-SDRAM= Spare 512-MB SDRAM
WS-X4248-FE-SFP(=) Cisco Catalyst 4500 Series 48-port 100BASE-X (SFP optics optional)
GLC-FE-100FX24 24 units of GLC-FE-100FX
GLC-FE-100FX48 48 units of GLC-FE-100FX
GLC-FE-100LX48 48 units of GLC-FE-100LX
GLC-FE-100BX-D48 48 units of GLC-FE-100BX-D
GLC-FE-100FX 100BASE-FX SFP for Fast Ethernet SFP ports
GLC-FE-100LX 100BASE-LX10 SFP for Fast Ethernet ports
GLC-FE-100BX-U 100BASE-BX10-U SFP for Fast Ethernet ports
GLC-FE-100BX-D 100BASE-BX10-D SFP for Fast Ethernet SFP ports
Software Requirements
Product Software Type Minimum Software Requirement
Cisco Catalyst 4500 Series Supervisor Engine II-Plus-10GE Cisco IOS Software Cisco IOS Software Release 12.2(25)SG or later
Cisco Catalyst 4500 Series 48-Port 100BASE-X SFP Line Card Cisco IOS Software Cisco IOS Software Release 12.2(25)SG or later
First Customer Shipment Schedule and Leadtimes
Product Ordering Opened Target FCS Vol Ship Lead Time
WS-X4013+10GE(=) October 28, 2005 November 1, 2005 December 2005 3 weeks
WS-X4248-FE-SFP(=) November 1, 2005 November 3, 2005 January 2006 3 weeks
Online Documentation
Cisco Catalyst 4500 Series Supervisor Engine II-Plus-10GE product information, including data sheet and Q & A, available at:
Cisco Catalyst 4500 Series Supervisor Engine II-Plus-10GE Data Sheet:
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 526-4100
Cisco Systems has more than 200 offices in the following countries and regions. Addresses, phone numbers, and fax numbers are listed on the
Argentina • Australia • Austria • Belgium • Brazil • Bulgaria • Canada • Chile • China PRC • Colombia • Costa Rica
Croatia • Cyprus • Czech Republic • Denmark • Dubai, UAE • Finland • France • Germany • Greece • Hong Kong SAR
Hungary • India • Indonesia • Ireland • Israel • Italy • Japan • Korea • Luxembourg • Malaysia • Mexico
The Netherlands • New Zealand • Norway • Peru • Philippines • Poland • Portugal • Puerto Rico • Romania • Russia
Saudi Arabia • Scotland • Singapore • Slovakia • Slovenia • South Africa • Spain • Sweden • Switzerland • Taiwan
Thailand • Turkey • Ukraine • United Kingdom • United States • Venezuela • Vietnam • Zimbabwe
All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship
between Cisco and any other company. (0502R) Pa/LW9696 10/05