Linksys Business Series 24-port Gigabit Ethernet Switch
Model SGE2000
QUICK INSTALLATION GUIDE
Linksys Business Series SGE2000 Gigabit Ethernet Switch
Linksys Business Series SGE2000 Gigabit Ethernet Switch
1
Linksys Business Series SGE2000 Gigabit Ethernet Switch
Linksys Business Series SGE2000 Gibabit Ethernet Switch
Install: Desktop
2
140988
T
M
Install: Wall
3
Linksys Business Series SGE2000 Gigabit Ethernet Switch
Linksys Business Series SGE2000 Gibabit Ethernet Switch
180911
T
M
4
Install: Wall
Install: Rack
5
Linksys Business Series SGE2000 Gigabit Ethernet Switch
Linksys Business Series SGE2000 Gibabit Ethernet Switch
6
Connect Devices
Connect Linksys One Devices
7
Linksys Business Series SGE2000 Gigabit Ethernet Switch
Linksys Business Series SGE2000 Gibabit Ethernet Switch
Connect to Power
8
180777
Install: Stack
Before setting up stacked switches in your network, see the technical bulletin, “Linksys Stackable Switches: How to Build
Stacks and Understand Their Operation,” available at www.linksys.com.
9
Linksys Business Series SGE2000 Gigabit Ethernet Switch
10
Install: Stack
Linksys Business Series SGE2000 Gibabit Ethernet Switch
Warning
Use only ports G1/G2 for stacking. If you manually assign a
Unit ID to one unit, you should manually assign Unit IDs to
units. Using both system-assigned and manually-assigned IDs in
your network can impact system performance.
all
Connect Devices
11
Linksys Business Series SGE2000 Gigabit Ethernet Switch
Linksys Business Series SGE2000 Gibabit Ethernet Switch
180780
Connect to Power
12
Regulatory Compliance and Safety Information
The Linksys One SFE2000 Fast Ethernet switch meets the following regulatory compliance and safety standards:
Specification Description
Regulatory Compliance Products with the CE Marking indicate compliance with the 89/336/EEC and 73/23/EEC directives,
which include the safety and EMC standards listed below.
Safety UL 60950-1
IEC60950-1 CB / TUV/Rh
CSA-C22.2 No. 60950
EN 60950
AS/NZS 60950-1
C-Tick
EMC FCC Part 15 (CFR 47) Class A
ICES-003 Class A
EN 55022 Class A
CISPR22 Class A
EN 55024, EN 50082-1, EN 61000-3-2, EN 61000-3-3, EN 61000-6-1
Linksys Business Series SGE2000 Gigabit Ethernet Switch
Federal Communication Commission Interference Statement
This Equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Linksys Business Series SGE2000 Gigabit Ethernet Switch
Warning
You are cautioned that changes or modifications not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.
Industry Canada Statement
The Class [A] digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulation. Cet appareil numerique
de la class [A] respecte toutes les exigences du Reglement sur le materiel brouilleur du Canada.
EC Declaration of Conformity (Europe)
In compliance with the EMC Directive 89/336/EEC, Low Voltage Directive 73/23/EEC, and Amendment Directive 93/68/EEC, this product
meets the requirements of the following standards:
• EN55022 Emission
• EN55024 Immunity
Environmental Specifications
he following statements are warnings or safety guidelines. A warning means danger. You are in a situation that could cause bodily injury.
Dimensions 17.32" x 14.70" x 1.73" (440 mm x 375 mm x 44 mm)
Unit Weight 14.09 lbs. or 6.39 kg
Power 48 VDC, 100-240V 1.4A
Certification UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47), Class A
EN60950 (2001)
Security ACL, 802.1x
Operating Temp 0ºC to 40ºC (32ºF to 104ºF)
Storage Temp -20ºC to 70ºC (-4ºF to 158ºF)
Operating Humidity 10% to 90% relative humidity, Non-Condensing
Storage Humidity 10% to 95% relative humidity, Non-Condensing
Linksys Business Series SGE2000 Gigabit Ethernet Switch
Safety Information
Linksys Business Series SGE2000 Gigabit Ethernet Switch
Warning
Attention
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury.
Before you work on any equipment, be aware of the hazards involved with electrical
circuitry and be familiar with standard practices for preventing accidents. Use the statement
number provided at the end of each warning to locate its translation in the translated safety
warnings that accompanied this device.
SAVE THESE INSTRUCTIONS
IMPORTANTES INFORMATIONS DE SÉCURITÉ
Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une
situation pouvant entraîner des blessures ou des dommages corporels. Avant de
travailler sur un équipement, soyez conscient des dangers liés aux circuits
électriques et familiarisez-vous avec les procédures couramment utilisées pour
éviter les accidents. Pour prendre connaissance des traductions des avertissements
figurant dans les consignes de sécurité traduites qui accompagnent cet appareil,
référez-vous au numéro de l'instruction situé à la fin de chaque avertissement.
CONSERVEZ CES INFORMATIONS
ore working on equipment, be aware of the hazards involved with electrical circuitry and standard safety practices to prevent accidents.
Warning
Attention
Warning
Attention
Work During Lightning Activity
Do not work on the system or connect or disconnect cables during periods of lightning
activity.
Ne pas travailler sur le système ni brancher ou débrancher les câbles pendant un
orage.
Installation Instructions
Read the installation instructions before connecting the system to the power source.
Avant de brancher le système sur la source d'alimentation, consulter les directives
d'installation.
Linksys Business Series SGE2000 Gigabit Ethernet Switch
Warning
SELV Circuit
To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to
telephone-network voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN
ports contain TNV circuits. Some LAN and WAN ports both use RJ-45 connectors. Use
caution when connecting cables.
Linksys Business Series SGE2000 Gigabit Ethernet Switch
Attention
Warning
Pour éviter une électrocution, ne raccordez pas les circuits de sécurité basse
tension (Safety Extra-Low Voltage ou SELV) à des circuits de tension de réseau
téléphonique (Telephone Network Voltage ou TNV). Les ports du réseau local
(LAN) contiennent des circuits SELV et les ports du réseau longue distance (WAN)
sont munis de circuits TNV. Certains ports LAN et WAN utilisent des connecteurs
RJ-45. Raccordez les câbles en prenant toutes les précautions nécessaires.
Equipment Installation
Only trained and qualified personnel should be allowed to install, replace, or service
this equipment.
Power Safety Warnings
Attention
Warning
Attention
Il est vivement recommandé de confier l'installation, le remplacement et la
maintenance de ces équipements à des personnels qualifiés et expérimentés.
Comply with Local National Electrical Codes
Installation of the equipment must comply with local and national electrical codes.
L'équipement doit être installé conformément aux normes électriques nationales et
locales.
Linksys Business Series SGE2000 Gigabit Ethernet Switch
Warning
Product Disposal
Ultimate disposal of this product should be handled according to all national laws and
regulations.
Linksys Business Series SGE2000 Gigabit Ethernet Switch
Attention
Warning
Attention
La mise au rebut ou le recyclage de ce produit sont généralement soumis à des lois
et/ou directives de respect de l'environnement. Renseignez-vous auprès de
l'organisme compétent.
TN Power
The device is designed to work with TN power systems.
Ce dispositif a été conçu pour fonctionner avec des systèmes d'alimentation TN.
Warning
Ground Conductor Warning
Never defeat the ground conductor or operate the equipment in the absence of a suitably
installed ground conductor. Contact the appropriate electrical inspection authority or an
electrician if you are uncertain that suitable grounding is available.
Warning
Attention
Warning
Power Supply Installation Warning
The power supply must be placed indoors.
Le bloc d’alimentation électrique doit être placé à l’intérieur.
Circuit Breaker
This product relies on the building’s installation for short-circuit (overcurrent)
protection. Ensure that the protective device is rated not greater than: 120 VAC,
15A U.S. (240 VAC, 10A international)
Linksys Business Series SGE2000 Gigabit Ethernet Switch
Attention
Pour ce qui est de la protection contre les courts-circuits (surtension), ce
produit dépend de l'installation électrique du local. Vérifiez que le courant
nominal du dispositif de protection n'est pas supérieur à:
120 VAC, 15A U.S. (240 VAC, 10A international)
Linksys Business Series SGE2000 Gigabit Ethernet Switch
Warning
Attention
Main Disconnecting Device
The plug-socket combination must be accessible at all times, because it serves as the
main disconnecting device.
La combinaison de prise de courant doit être accessible à tout moment parce
qu'elle fait office de système principal de déconnexion.
Caution Only use the Linksys-specified power supply. Refer to the installation manual provided with this
product.
Linksys Software License Agreement v.2.14.05
THIS LICENSE AGREEMENT IS BETWEEN YOU AND CISCO-LINKSYS LLC (“Linksys”). BY DOWNLOADING OR INSTALLING THE
SOFTWARE, OR USING THE PRODUCT CONTAINING THE SOFTWARE, YOU ARE CONSENTING TO BE BOUND BY THIS
AGREEMENT. IF YOU DO NOT AGREE TO ALL OF THESE TERMS, THEN YOU MAY NOT DOWNLOAD, INSTALL OR USE THE
SOFTWARE. YOU MAY RETURN UNUSED SOFTWARE (OR, IF THE SOFTWARE IS SUPPLIED AS PART OF ANOTHER PRODUCT, THE
UNUSED PRODUCT) FOR A FULL REFUND UP TO 30 DAYS AFTER ORIGINAL PURCHASE, SUBJECT TO THE RETURN PROCESS
AND POLICIES OF THE PARTY FROM WHICH YOU PURCHASED SUCH PRODUCT OR SOFTWARE.
License. Subject to the terms and conditions of this Agreement, Linksys grants the original end user purchaser of the Linksys product
containing the Software (“You”) a nonexclusive license to use the Software solely as embedded in or (where authorized in the applicable
documentation) for communication with such product. This license may not be sublicensed, and is not transferable except to a person or entity
to whom you transfer ownership of the complete Linksys product containing the Software, provided you permanently transfer all rights under
this Agreement and do not retain any full or partial copies of the Software, and the recipient agrees to the terms of this Agreement.
“Software” includes, and this Agreement will apply to (a) the Linksys software provided in or with the applicable Linksys product, and (b)
any upgrades, updates, bug fixes or modified versions (“Upgrades”) or backup copies of the Software supplied to You by Linksys or an
authorized reseller, provided you already hold a valid license to the original software and have paid any applicable fee for the Upgrade.
Protection of Information. The Software and documentation contain trade secrets and/or copyrighted materials of Linksys or its suppliers.
You will not decompile, decrypt, reverse engineer or disassemble the Software (except to the extent expressly permitted by law
notwithstanding this provision), and will not disclose or make available such trade secrets or copyrighted material in any form to any third party.
Title to Software and documentation will remain solely with Linksys.
Open Source Software. The GPL source code incorporated into the Software is available for free download at http://www.linksys.com/gpl. If
You would like a copy of the GPL source code in this Software on a CD, Linksys will mail to You a CD with such code for $9.99 plus the cost of
shipping upon request.
Term and Termination. You may terminate this License at any time by destroying all copies of the Software and documentation. Your rights
under this License will terminate immediately without notice from Linksys if You fail to comply with any provision of this Agreement.
Linksys Business Series SGE2000 Gigabit Ethernet Switch
Linksys Business Series SGE2000 Gigabit Ethernet Switch
Limited Warranty
Linksys warrants this Linksys hardware product against defects in materials and workmanship under normal use for the Warranty Period,
which begins on the date of purchase by the original end-user purchaser and lasts for the period specified for this product at
www.linksys.com/warranty. The internet URL address and the web pages referred to herein may be updated by Linksys from time to time; the
version in effect at the date of purchase shall apply.
This limited warranty is non-transferable and extends only to the original end-user purchaser. Your exclusive remedy and Linksys' entire
liability under this limited warranty will be for Linksys, at its option, to (a) repair the product with new or refurbished parts, (b) replace the
product with a reasonably available equivalent new or refurbished Linksys product, or (c) refund the purchase price of the product less any
rebates. Any repaired or replacement products will be warranted for the remainder of the original Warranty Period or thirty (30) days,
whichever is longer. All products and parts that are replaced become the property of Linksys.
EXCLUSIONS AND LIMITATIONS
This limited warranty does not apply if: (a) the product assembly seal has been removed or damaged, (b) the product has been altered or
modified, except by Linksys, (c) the product damage was caused by use with non-Linksys products, (d) the product has not been installed,
operated, repaired, or maintained in accordance with instructions supplied by Linksys, (e) the product has been subjected to abnormal
physical or electrical stress, misuse, negligence, or accident, (f) the serial number on the Product has been altered, defaced, or removed, or
(g) the product is supplied or licensed for beta, evaluation, testing or demonstration purposes for which Linksys does not charge a purchase
price or license fee.
ALL SOFTWARE PROVIDED BY LINKSYS WITH THE PRODUCT, WHETHER FACTORY LOADED ON THE PRODUCT OR CONTAINED ON
MEDIA ACCOMPANYING THE PRODUCT, IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND. Without limiting the foregoing,
Linksys does not warrant that the operation of the product or software will be uninterrupted or error free. Also, due to the continual
development of new techniques for intruding upon and attacking networks, Linksys does not warrant that the product, software or any
equipment, system or network on which the product or software is used will be free of vulnerability to intrusion or attack. The product may
include or be bundled with third party software or service offerings. This limited warranty shall not apply to such third party software or
service offerings. This limited warranty does not guarantee any continued availability of a third party's service for which this product's use or
operation may require.
TO THE EXTENT NOT PROHIBITED BY LAW, ALL IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY, SATISFACTORY
QUALITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE DURATION OF THE WARRANTY PERIOD. ALL OTHER EXPRESS
OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
NON-INFRINGEMENT, ARE DISCLAIMED. Some jurisdictions do not allow limitations on how long an implied warranty lasts, so the above
limitation may not apply to you. This limited warranty gives you specific legal rights, and you may also have other rights which vary by
jurisdiction.
TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT WILL LINKSYS BE LIABLE FOR ANY LOST DATA, REVENUE OR PROFIT, OR FOR
SPECIAL, INDIRECT, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, REGARDLESS OF THE THEORY OF LIABILITY (INCLUDING
NEGLIGENCE), ARISING OUT OF OR RELATED TO THE USE OF OR INABILITY TO USE THE PRODUCT (INCLUDING ANY SOFTWARE),
EVEN IF LINKSYS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT WILL LINKSYS' LIABILITY EXCEED THE
AMOUNT PAID BY YOU FOR THE PRODUCT. The foregoing limitations will apply even if any warranty or remedy provided under this
limited warranty fails of its essential purpose. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to you.
OBTAINING WARRANTY SERVICE
If you have a question about your product or experience a problem with it, please go to www.linksys.com/support where you will find a
variety of online support tools and information to assist you with your product. If the product proves defective during the Warranty Period,
contact the Value Added Reseller (VAR) from whom you purchased the product or Linksys Technical Support for instructions on how to obtain
warranty service. The telephone number for Linksys Technical Support in your area can be found in the product User Guide and at
Linksys Business Series SGE2000 Gigabit Ethernet Switch
Linksys Business Series SGE2000 Gigabit Ethernet Switch
www.linksys.com. Have your product serial number and proof of purchase on hand when calling. A DATED PROOF OF ORIGINAL
PURCHASE IS REQUIRED TO PROCESS WARRANTY CLAIMS. If you are requested to return your product, you will be given a Return
Materials Authorization (RMA) number. You are responsible for properly packaging and shipping your product to Linksys at your cost
and risk. You must include the RMA number and a copy of your dated proof of original purchase when returning your product. Products
received without a RMA number and dated proof of original purchase will be rejected. Do not include any other items with the product
you are returning to Linksys. Defective product covered by this limited warranty will be repaired or replaced and returned to you without
charge. Customers outside of the United States of America and Canada are responsible for all shipping and handling charges, custom
duties, VAT and other associated taxes and charges. Repairs or replacements not covered under this limited warranty will be subject to
charge at Linksys' then-current rates.
TECHNICAL SUPPORT
This limited warranty is neither a service nor a support contract. Information about Linksys' current technical support offerings and
policies (including any fees for support services) can be found at www.linksys.com/support.
This limited warranty is governed by the laws of the jurisdiction in which the Product was purchased by you.
Please direct all inquiries to: Linksys, P.O. Box 18558, Irvine, CA 92623.
©2007 Cisco Systems, Inc. All rights reserved. Linksys is a registered trademark and the Linksys One logo is a trademark of Cisco Systems, Inc.
Loading...