Cisco ONS 15310-CL, ONS 15310-MA User Manual

About this Manual
Note The terms "Unidirectional Path Switched Ring" and "UPSR" may appear in Cisco literature. These terms
do not refer to using Cisco ONS 15xxx products in a unidirectional path switched ring configuration. Rather, these terms, as well as "Path Protected Mesh Network" and "PPMN," refer generally to Cisco's path protection feature, which may be used in any topological network configuration. Cisco does not recommend using its path protection feature in any particular topological network configuration.
This section explains the objectives, intended audience, and organization of this publication and describes the conventions that convey instructions and other information.
This section provides the following information:
Revision History
Document Objectives
Audience
Document Organization
Related Documentation
Document Conventions
Obtaining Optical Networking Information
Obtaining Documentation and Submitting a Service Request
Revision History
Date Notes
April 2007
September 2007 Added a new rule for creation of protection groups under section “1:1 Electrical
Revision History Table added for the first time.
Corrected product part numbers for the UBIC-V and UBIC-H DS3 cables.
Added server trail information in the Virtual Concatenated Circuits section in
Chapter 8.
Updated About this Guide chapter.
Card Protection” in the “Card Protection” chapter.
Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual, R7.0
xxi
About this Manual
Date Notes
October 2008
March 2009
December 2009
April 2010
July 2010
July 2011 Added a note in the “PC and UNIX Workstation Requirements” section of
March 2012 Updated the sections “15310-CL-CTX” and “CTX2500 Card” in the appendix
August 2012 The full length book-PDF was generated.
Updated alarm information in External Alarms and Controls section in Alarm
Monitoring and Management chapter.
Added a note in Card Default Settings and Node Default Settings section of
Appendix C, Network Element Defaults.
Updated section Cabling Types in Chapter 2 with ACS Cable T015654 model
and table for compatible DS-1 cables available from Lorom Indrustrial Co., LTD.
Added a note in Table A-8, Single-Mode Fiber SFP Port Cabling
Specifications—ONS 15310-MA Only of Appendix A, Specifications.
Updated section External Alarms and Controls in Chapter 11, Alarm
Monitoring and Management.
Updated Figure 2.7, “ACS Cable T015654” in Chapter 2, “Cisco ONS
15310-MA Shelf Assembly Hardware”.
Updated the section “SNMP Overview” in the chapter “SNMP”.
Updated the section “CE-100T-8 and ML-100T-8 Cards” in the appendix
“Specifications”.
Chapter, “Cisco Transport Controller Operation”.
“Specifications”.
Document Objectives
The Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual provides hardware and software reference information for Cisco ONS 15310 nodes and networks. Use this manual in conjunction with the appropriate publications listed in the Related Documentation section.
Audience
To use this publication, you should be familiar with Cisco or equivalent optical transmission hardware and cabling, telecommunications hardware and cabling, electronic circuitry and wiring practices, and preferably have experience as a telecommunications technician.
xxii
Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual, R7.0
About this Manual
Document Organization
Table 1 Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual Chapters
Title Summary
Chapter 1, “Cisco ONS 15310-CL Shelf Assembly Hardware”
Chapter 2, “Cisco ONS 15310-MA Shelf Assembly Hardware”
Chapter 3, “Card Reference” Includes descriptions of all cards in the
Chapter 4, “Card Protection” Includes electrical and optical card protection
Chapter 5, “Cisco Transport Controller Operation”
Chapter 6, “Security” Includes information for user set up, security
Chapter 7, “Timing” Includes node and network timing information.
Chapter 8, “Circuits and Tunnels” Includes STS and VT, bidirectional and
Chapter 9, “SONET Topologies and Upgrades” Includes the SONET configurations used by the
Chapter 10, “Management Network Connectivity”
Chapter 11, “Alarm Monitoring and Management”
Chapter 12, “Performance Monitoring” Includes performance-monitoring parameters for
Chapter 13, “SNMP” Describes Simple Network Management Protocol
Includes descriptions of the rack, power and ground, cables, fans, and slots on the ONS 15310-CL.
Includes descriptions of the rack, power and ground, cables, electrical interface assemblies (EIAs), fan-tray assembly (FTA), and slots on the ONS 15310-MA.
ONS 15310-CL and 15310-MA.
methods.
Includes information about CTC installation, the CTC window, computer requirements, software versions, and database reset and revert.
privileges, security policies, audit trail, and RADIUS authentication.
unidirectional, revertive and nonrevertive, electrical and optical, multiple and path trace circuit information, as well as data communications channel (DCC) tunnels.
ONS 15310-CL and ONS 15310-MA; including path protection configurations, linear add/drop multiplexers (ADMs), subtending rings, and optical bus configurations, as well as information about upgrading optical speeds within any configuration.
Includes IP addressing scenarios and information about provisionable patchcords, the IP routing table, external firewalls, open gateway network element (GNE) networks, and OSI protocols.
Includes CTC alarm management information.
each ONS 15310-CL and ONS 15310-MA card.
(SNMP) as implemented by the ONS 15310-CL and ONS 15310-MA.
Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual, R7.0
xxiii
Table 1 Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual Chapters
Title Summary
Appendix A, “Specifications” Includes shelf assembly and card specifications for
Appendix B, “Administrative and Service States” Describes card, port, and cross-connect service
Appendix C, “Network Element Defaults” Lists card, node, and CTC-level network element
Related Documentation
Use the Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual in conjunction with the following referenced publications:
Cisco ONS 15310-CL and Cisco ONS 15310-MA Procedure Guide
Provides installation, turn up, test, and maintenance procedures.
About this Manual
the ONS 15310-CL and ONS 15310-MA.
states.
(NE) defaults.
Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide
Provides alarm descriptions and troubleshooting procedures, general troubleshooting procedures, error messages, performance monitoring parameters, and SNMP information.
Cisco ONS SONET TL1 Command Guide
Provides a full TL1 command and autonomous message set including parameters, AIDs, conditions and modifiers for the Cisco ONS 15454, ONS 15327, ONS 15600, ONS 15310-CL, and Cisco ONS 15310-MA systems.
Cisco ONS SONET TL1 Reference Guide
Provides general information, procedures, and errors for TL1 in the Cisco ONS 15454, ONS 15327, ONS 15600, ONS 15310-CL, and Cisco ONS 15310-MA systems.
Cisco ONS 15310-CL and Cisco ONS 15310-MA Ethernet Card Software Feature and Configuration
Guide
Provides software feature and operation information for Ethernet cards in the Cisco ONS 15310-CL and Cisco ONS 15310-MA.
Release Notes for the Cisco ONS 15310-CL Release 7.0
Provides caveats, closed issues, and new features and functionality information.
Release Notes for the Cisco ONS 15310-MA Release 7.0
Provides caveats, closed issues, and new features and functionality information.
For an update on End-of-Life and End-of-Sale notices, refer to
http://www.cisco.com/en/US/products/hw/optical/ps2001/prod_eol_notices_list.html.
Document Conventions
This publication uses the following conventions:
Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual, R7.0
xxiv
About this Manual
Convention Application
boldface Commands and keywords in body text.
italic Command input that is supplied by the user.
[ ] Keywords or arguments that appear within square brackets are optional.
{ x | x | x } A choice of keywords (represented by x) appears in braces separated by
vertical bars. The user must select one.
Ctrl The control key. For example, where Ctrl + D is written, hold down the
Control key while pressing the D key.
screen font Examples of information displayed on the screen.
boldface screen font Examples of information that the user must enter.
< > Command parameters that must be replaced by module-specific codes.
Note Means reader take note. Notes contain helpful suggestions or references to material not covered in the
document.
Caution Means reader be careful. In this situation, the user might do something that could result in equipment
damage or loss of data.
Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual, R7.0
xxv
About this Manual
Warning
Waarschuwing
Varoitus
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device.
Statement 1071
SAVE THESE INSTRUCTIONS
BELANGRIJKE VEILIGHEIDSINSTRUCTIES
Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van de standaard praktijken om ongelukken te voorkomen. Gebruik het nummer van de verklaring onderaan de waarschuwing als u een vertaling van de waarschuwing die bij het apparaat wordt geleverd, wilt raadplegen.
BEWAAR DEZE INSTRUCTIES
TÄRKEITÄ TURVALLISUUSOHJEITA
Tämä varoitusmerkki merkitsee vaaraa. Tilanne voi aiheuttaa ruumiillisia vammoja. Ennen kuin käsittelet laitteistoa, huomioi sähköpiirien käsittelemiseen liittyvät riskit ja tutustu onnettomuuksien yleisiin ehkäisytapoihin. Turvallisuusvaroitusten käännökset löytyvät laitteen mukana toimitettujen käännettyjen turvallisuusvaroitusten joukosta varoitusten lopussa näkyvien lausuntonumeroiden avulla.
Attention
Warnung
SÄILYTÄ NÄMÄ OHJEET
IMPORTANTES INFORMATIONS DE SÉCURITÉ
Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation pouvant entraîner des blessures ou des dommages corporels. Avant de travailler sur un équipement, soyez conscient des dangers liés aux circuits électriques et familiarisez-vous avec les procédures couramment utilisées pour éviter les accidents. Pour prendre connaissance des traductions des avertissements figurant dans les consignes de sécurité traduites qui accompagnent cet appareil, référez-vous au numéro de l'instruction situé à la fin de chaque avertissement.
CONSERVEZ CES INFORMATIONS
WICHTIGE SICHERHEITSHINWEISE
Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu Verletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und den üblichen Verfahren zur Vorbeugung vor Unfällen vertraut. Suchen Sie mit der am Ende jeder Warnung angegebenen Anweisungsnummer nach der jeweiligen Übersetzung in den übersetzten Sicherheitshinweisen, die zusammen mit diesem Gerät ausgeliefert wurden.
BEWAHREN SIE DIESE HINWEISE GUT AUF.
xxvi
Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual, R7.0
About this Manual
Avvertenza
Advarsel
Aviso
IMPORTANTI ISTRUZIONI SULLA SICUREZZA
Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle persone. Prima di intervenire su qualsiasi apparecchiatura, occorre essere al corrente dei pericoli relativi ai circuiti elettrici e conoscere le procedure standard per la prevenzione di incidenti. Utilizzare il numero di istruzione presente alla fine di ciascuna avvertenza per individuare le traduzioni delle avvertenze riportate in questo documento.
CONSERVARE QUESTE ISTRUZIONI
VIKTIGE SIKKERHETSINSTRUKSJONER
Dette advarselssymbolet betyr fare. Du er i en situasjon som kan føre til skade på person. Før du begynner å arbeide med noe av utstyret, må du være oppmerksom på farene forbundet med elektriske kretser, og kjenne til standardprosedyrer for å forhindre ulykker. Bruk nummeret i slutten av hver advarsel for å finne oversettelsen i de oversatte sikkerhetsadvarslene som fulgte med denne enheten.
TA VARE PÅ DISSE INSTRUKSJONENE
INSTRUÇÕES IMPORTANTES DE SEGURANÇA
Este símbolo de aviso significa perigo. Você está em uma situação que poderá ser causadora de lesões corporais. Antes de iniciar a utilização de qualquer equipamento, tenha conhecimento dos perigos envolvidos no manuseio de circuitos elétricos e familiarize-se com as práticas habituais de prevenção de acidentes. Utilize o número da instrução fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham este dispositivo.
¡Advertencia!
Varning!
GUARDE ESTAS INSTRUÇÕES
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
Este símbolo de aviso indica peligro. Existe riesgo para su integridad física. Antes de manipular cualquier equipo, considere los riesgos de la corriente eléctrica y familiarícese con los procedimientos estándar de prevención de accidentes. Al final de cada advertencia encontrará el número que le ayudará a encontrar el texto traducido en el apartado de traducciones que acompaña a este dispositivo.
GUARDE ESTAS INSTRUCCIONES
VIKTIGA SÄKERHETSANVISNINGAR
Denna varningssignal signalerar fara. Du befinner dig i en situation som kan leda till personskada. Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och känna till vanliga förfaranden för att förebygga olyckor. Använd det nummer som finns i slutet av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna anordning.
SPARA DESSA ANVISNINGAR
Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual, R7.0
xxvii
About this Manual
xxviii
Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual, R7.0
About this Manual
Aviso
Advarsel
INSTRUÇÕES IMPORTANTES DE SEGURANÇA
Este símbolo de aviso significa perigo. Você se encontra em uma situação em que há risco de lesões corporais. Antes de trabalhar com qualquer equipamento, esteja ciente dos riscos que envolvem os circuitos elétricos e familiarize-se com as práticas padrão de prevenção de acidentes. Use o número da declaração fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham o dispositivo.
GUARDE ESTAS INSTRUÇÕES
VIGTIGE SIKKERHEDSANVISNINGER
Dette advarselssymbol betyder fare. Du befinder dig i en situation med risiko for legemesbeskadigelse. Før du begynder arbejde på udstyr, skal du være opmærksom på de involverede risici, der er ved elektriske kredsløb, og du skal sætte dig ind i standardprocedurer til undgåelse af ulykker. Brug erklæringsnummeret efter hver advarsel for at finde oversættelsen i de oversatte advarsler, der fulgte med denne enhed.
GEM DISSE ANVISNINGER
Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual, R7.0
xxix
About this Manual
xxx
Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual, R7.0
About this Manual
Obtaining Optical Networking Information
This section contains information that is specific to optical networking products. For information that pertains to all of Cisco, refer to the Obtaining Documentation and Submitting a Service Request section.
Where to Find Safety and Warning Information
For safety and warning information, refer to the Cisco Optical Transport Products Safety and Compliance Information document that accompanied the product. This publication describes the
international agency compliance and safety information for the Cisco ONS 15310 system. It also includes translations of the safety warnings that appear in the ONS 15310 system documentation.
Cisco Optical Networking Product Documentation CD-ROM
Optical networking-related documentation, including Cisco ONS 15xxx product documentation, is available in a CD-ROM package that ships with your product. The Optical Networking Product Documentation CD-ROM is updated periodically and may be more current than printed documentation.
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0
Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual, R7.0
xxxi
About this Manual
xxxii
Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual, R7.0
Loading...