Cisco Nexus 9300-EX, Nexus 9300-FX User Manual

Data Sheet

Cisco Nexus 9300-EX and 9300-FX Platform Switches

Product overview

Based on Cisco Cloud Scale technology, the Cisco Nexus® 9300-EX and 9300-FX platforms are the next generation of fixed Cisco Nexus 9000 Series Switches. The new platforms support cost-effective cloud-scale deployments, an increased number of endpoints, and cloud services with wire-rate security and telemetry. The platforms are built on modern system architecture designed to provide high performance and meet the evolving needs of highly scalable data centers and growing enterprises.

Cisco Nexus 9300-EX and 9300-FX platform switches offer a variety of interface options to transparently migrate existing data centers from 100-Mbps, 1-Gbps, and 10-Gbps speeds to 25 Gbps at the server, and from 10- and 40Gbps speeds to 50 and 100 Gbps at the aggregation layer. The platforms provide investment protection for customers, delivering large buffers, highly flexible Layer 2 and Layer 3 scalability, and performance to meet the changing needs of virtualized data centers and automated cloud environments.

The platform hardware is capable of collecting comprehensive Cisco Tetration Analytics™ telemetry information at line rate across all the ports without adding any latency to the packets or negatively affecting switch performance. This telemetry information is exported every 100 milliseconds by default directly from the switch’s ApplicationSpecific Integrated Circuit (ASIC). This information consists of three types of data:

●

Flow information: This information contains information about endpoints, protocols, ports, when the flow started, how long the flow was active, etc.

●

Interpacket variation: This information captures any interpacket variations within the flow. Examples include variation in Time To Live (TTL), IP and TCP flags, payload length, etc.

●

Context details: Context information is derived outside the packet header, including variation in buffer utilization, packet drops within a flow, association with tunnel endpoints, etc.

The Cisco Tetration Analytics platform consumes this telemetry data, and by using unsupervised machine learning and behavior analysis it can provide outstanding pervasive visibility across everything in your data center in real time. By using algorithmic approaches, the Cisco Tetration Analytics platform provides a deep application insights and interactions, enabling dramatically simplified operations, a zero-trust model, and migration of applications to any programmable infrastructure. To learn more, go to https://www.cisco.com/go/tetration.

Cisco provides two modes of operation for Cisco Nexus 9000 Series Switches. Organizations can use Cisco NX OS Software to deploy the switches in standard Cisco Nexus switch environments (NX-OS mode). Organizations also can use a hardware infrastructure that is ready to support the Cisco Application Centric Infrastructure (Cisco ACI™) platform to take full advantage of an automated, policy-based, systems-management approach (ACI mode).

Model

Description

Cisco Nexus 93180YC-EX Switch

48 x 1/10/25-Gbps fiber ports and 6 x 40/100-Gbps Quad Small Form-Factor Pluggable 28 (QSFP28) ports

Cisco Nexus 93108TC-EX Switch

48 x 100M/1/10GBASE-T ports and 6 x 40/100-Gbps QSFP28 ports

Cisco Nexus 93180LC-EX Switch

Up to 32 x 40/50-Gbps QSFP+ ports OR 18 x 100-Gbps QSFP28 ports

Switch models

Table 1 summarizes the Cisco Nexus 9300-EX platform switch models.

Table 1. Cisco Nexus 9300-EX platform switches

The Cisco Nexus 93180YC-EX Switch (Figure 1) is a 1-Rack-Unit (1RU) switch with latency of less than 1 microsecond that supports 3.6 Terabits per second (Tbps) of bandwidth and over 2.6 billion packets per second (bpps). The 48 downlink ports on the 93180YC-EX can be configured to work as 1-, 10-, or 25-Gbps ports, offering deployment flexibility and investment protection. The uplink can support up to six 40- and 100-Gbps ports, or a combination of 1-, 10-, 25-, 40-, 50-, and 100-Gbps connectivity, offering flexible migration options. The switch has FC-FEC enabled for 25Gbps, and supports upto 3m in DAC connectivity. Please check Cisco Optics Matrix for the most updated support.

Figure 1. Cisco Nexus 93180YC-EX Switch

The Cisco Nexus 93108TC-EX Switch (Figure 2) is a 1RU switch that supports 2.16 Tbps of bandwidth and over

1.5 bpps. The 48 10GBASE-T downlink ports on the 93108TC-EX can be configured to work as 100-Mbps, 1 Gbps, or 10-Gbps ports. The uplink can support up to six 40- and 100-Gbps ports, or a combination of 1-, 10-, 25-, 40, 50-, and 100-Gbps connectivity, offering flexible migration options.

Figure 2. Cisco Nexus 93108TC-EX Switch

The Cisco Nexus 93180LC-EX Switch is the industry’s first 50-Gbps-capable 1RU switch that supports 3.6 Tbps of bandwidth and over 2.6 bpps across up to 32 fixed 40- and 50-Gbps QSFP+ ports or up to 18 fixed 100-Gbps ports (Figure 3). The switch can support up to 72 10-Gbps ports using breakout cables. A variety of flexible port configurations are supported using templates.

Figure 3. Cisco Nexus 93180LC-EX Switch

Model

Description

Cisco Nexus 93180YC-FX Switch

48 x 1/10/25-Gbps fiber ports and 6 x 40/100-Gbps QSFP28 ports

Cisco Nexus 93108TC-FX Switch

48 x 100M/1/10GBASE-T ports and 6 x 40/100-Gbps QSFP28 ports

Cisco Nexus 9348GC-FXP

48 x 100M/1G BASE-T ports, 4 x 10/25-Gbps SFP28 ports and 2 x 40/100-Gbps QSFP28 ports

Cisco Nexus 9336C-FX2

36 x 40/100-Gbps QSFP28 ports

Cisco Nexus 93240YC-FX2

48 x 1/10/25-Gbps fiber ports and 12 x 40/100-Gbps QSFP28 ports

1 2

Table 2 summarizes the Cisco Nexus 9300-FX platform switch models.

Table 2. Cisco Nexus 9300-FX platform switches

The Cisco Nexus 93180YC-FX Switch (Figure 4) is a 1RU switch with latency of less than 1 microsecond that supports 3.6 Tbps of bandwidth and 1.4 bpps. The 48 downlink ports on the 93180YC-FX can be configured to work as 1-, 10-, or 25-Gbps Ethernet or FCoE ports or as 16-, 32-Gbps Fibre Channel ports1, creating a point of convergence for primary storage, compute servers, and back-end storage resources at the top of rack.

The 6 uplinks ports can be configured as 40 and 100-Gbps Ethernet or FCoE ports, offering flexible migration options. All ports support wire-rate MACsec encryption2. The switch has FC-FEC and RS-FEC enabled for 25Gbps support.

Figure 4. Cisco Nexus 93180YC-FX Switch

The Cisco Nexus 93108TC-FX Switch (Figure 5) is a 1RU switch that supports 2.16 Tbps of bandwidth and over 850 mpps. The 48 10GBASE-T downlink ports on the 93108TC-FX can be configured to work as 100-Mbps, 1Gbps, or 10-Gbps ports. The 6 uplinks ports can be configured as 40- and 100-Gbps ports, offering flexible migration options.

Figure 5. Cisco Nexus 93108TC-FX Switch

The Cisco Nexus 9348GC-FXP Switch (Figure 6) is a 1RU switch that supports 696 Gbps of bandwidth and over 250 mpps. The 48 1GBASE-T downlink ports on the 9348GC-FXP can be configured to work as 100-Mbps, 1-Gbps ports. The 4 ports of SFP28 can be configured as 1/10/25-Gbps and the 2 ports of QSFP28 can be configured as 40- and 100-Gbps ports. The Cisco Nexus 9348GC-FXP is ideal for big data customers that require a Gigabit Ethernet ToR switch with local switching.

Capabilities to enable FC is on the software roadmap Capabilities to enable MACsec is on the software roadmap

3

Figure 6. Cisco Nexus 9348GC-FXP Switch

The Cisco Nexus 9336C-FX2 Switch (Figure 7) is a 1RU switch that supports 7.2 Tbps of bandwidth and over

2.8 bpps. The switch can be configured to work as 1/10/25/40/100-Gbps offering flexible options in a compact form factor. All ports support wire-rate MACsec encryption3. Breakout is supported on all ports. Please see feature table below for more information.

Figure 7. Cisco Nexus 9336C-FX2 Switch

The Cisco Nexus 93240YC-FX2 Switch (Figure 8) supports 4.8 Tbps of bandwidth and over 1.8 bpps. The 48 ports of downlinks support 1/10/25-Gbps. The 12 uplinks ports can be configured as 40- and 100-Gbps ports, offering flexible migration options. Breakout is not supported at FCS, but is on the roadmap. The switch is ideal for a nonoversubscribed solution in a compact form factor. The switch has FC-FEC and RS-FEC enabled for 25Gbps support.

Figure 8. Cisco Nexus 93240YC-FX2 Switch

Features and benefits

The Cisco Nexus 9300-EX and 9300-FX platforms provide the following features and benefits:

●

High performance, scalability, flexibility, and security

◦ The platform provides wire-rate Layer 2 and 3 switching on all ports. ◦ Robust hardware system specifications feature 4-core and 6-core CPUs, a minimum of 24 GB of system

memory (64 GB on 93180YC-FX model), and respectively 64-GB and 128-GB Solid-State Disk (SSD) drives on EX and FX models.

◦ The 40-MB buffer supports highly scalable data centers and big data applications. ◦ Flexible forwarding tables support up to 1 million shared entries on EX models and up to 2 million shared

entries on FX models.

Capabilities to enable MACsec is on the software roadmap

◦ Flexible use of TCAM space allows for custom definition of Access Control List (ACL) templates. ◦ IEEE 802.1ae MAC Security (MACsec) support on all ports of 9300-FX models with speed greater than

or equal to 10-Gbps, allows traffic encryption at the physical layer and provides secure server, border leaf, and leaf-to-spine connectivity.

●

Virtual Extensible LAN (VXLAN) *

◦ The platform offers native line-rate VXLAN routing. ◦ The Border Gateway Protocol (BGP) Ethernet Virtual Private Network (EVPN) control plane provides

scalable multitenancy and host mobility (refer to VXLAN Network with MP-BGP EVPN Control Plane for more information).

●

Hardware and software high availability

◦ Virtual Port-Channel (vPC) technology provides Layer 2 multipathing through the elimination of Spanning

Tree Protocol. It also enables fully utilized bisectional bandwidth and simplified Layer 2 logical topologies without the need to change the existing management and deployment models.

◦ The 64-way Equal-Cost MultiPath (ECMP) routing enables the use of Layer 3 fat-tree designs. This

feature helps organizations prevent network bottlenecks, increase resiliency, and add capacity with little network disruption.

◦ Advanced reboot capabilities include hot and cold patching. ◦ The switches use hot-swappable Power-Supply Units (PSUs) and fans with N+1 redundancy.

●

Purpose-built Cisco NX-OS Software operating system with comprehensive, proven innovations

◦ Open programmability supports built-in DevOps automation tools such as Puppet, Chef, and Ansible. ◦ Cisco NX-API supports a common programmatic approach across Cisco Nexus switches. ◦ Power-On Auto Provisioning (POAP) enables touchless bootup and configuration of the switch,

drastically reducing provisioning time.

◦ Cisco Embedded Event Manager (EEM) and Python scripting enable automation and remote operations

in the data center.

◦ Advanced buffer monitoring reports real-time buffer use per port and per queue, which allows

organizations to monitor traffic bursts and application traffic patterns.

◦ Complete Layer 3 unicast and multicast routing protocol suites are supported, including BGP, Open

Shortest Path First (OSPF), Enhanced Interior Gateway Routing Protocol (EIGRP), Routing Information Protocol Version 2 (RIPv2), Protocol Independent Multicast Sparse Mode (PIM-SM), Source-Specific Multicast (SSM), and Multicast Source Discovery Protocol (MSDP).

◦ Segment routing allows the network to forward Multiprotocol Label Switching (MPLS) packets and

engineer traffic without Resource Reservation Protocol (RSVP) Traffic Engineering (TE). It provides a control-plane alternative for increased network scalability and virtualization.

◦ Fibre Channel and Fibre Channel over Ethernet (FCoE

network administrator to control domain IDs and points of management on a Fibre Channel network as it scales. This feature enables LAN and SAN converged networks on a lossless, reliable Ethernet network.

**

) N-Port Virtualization (NPV) support enables the

◦ Network traffic monitoring with Cisco Nexus Data Broker builds simple, scalable, and cost-effective

network Test Access Points (TAPs) and Cisco Switched Port Analyzer (SPAN) aggregation for network traffic monitoring and analysis.

Feature

Cisco Nexus 93180YC-EX

Cisco Nexus 93108TC-EX

Cisco Nexus 93180LC-EX

Ports

48 x 10/25-Gbps and 6 x 40/100Gbps QSFP28 ports

48 x 10GBASE-T and 6 x 40/100Gbps QSFP28 ports

Up to 32 x 40/50-Gbps QSFP+ ports OR 18 x 100-Gbps QSFP28 ports

Downlink supported speeds

1/10/25-Gbps speeds

100-Mbps and 1/10-Gbps speeds

40/50-Gbps speeds

CPU

4 cores

System memory

24 GB

SSD drive

64 GB

System buffer

40 MB

Management ports

2 ports: 1 RJ-45 and 1 SFP

USB ports

1 1 1

RS-232 serial ports

1 1 1

Power supplies (up to 2)

650W AC, 930W DC, or 1200W HVAC/HVDC

500W AC, 930W DC, or 1200W HVAC/HVDC

Typical power* (AC/DC)

210W

290W

220W

Maximum power* (AC/DC)

470W

499W

500W

Input voltage (AC)

100 to 240V

Input voltage (high-voltage AC [HVAC])

200 to 277V

Input voltage (DC)

–48 to –60V

Input voltage (high-voltage DC [HVDC])

–240 to –380V

Frequency (AC)

50 to 60 Hz

Fans 4 4

4

Airflow

Port-side intake and exhaust

Physical dimensions (H x W x D)

1.72 x 17.3 x 22.5 in. (4.4 x 43.9 x 57.1 cm)

Acoustics

48.5 dBA at 40% fan speed, 64.9 dBA at 70% fan speed, and 77.8 dBA at 100% fan speed

48.6 dBA at 40% fan speed, 65.2 dBA at 70% fan speed, and 76.5 dBA at 100% fan speed

49.9 dBA at 50% fan speed, 66 dBA at 70% fan speed, and

73.9 dBA at 100% fan speed

RoHS compliance

Yes

MTBF

390,330 hours

366,130 hours

323,440 hours

◦ Automate the time-consuming tasks of creating, installing, and maintaining appropriate fabricwide switch

configurations with the new Cisco Nexus Fabric Manager.

*

Software support for Cisco Nexus 9348GC-FXP is on the roadmap

**

Software support is on the roadmap. Please visit the latest release notes for additional information

The Cisco Nexus 9300-EX, 9300-FX platforms offer industry-leading density and performance with flexible port configurations that can support existing copper and fiber cabling (Tables 3, 4 and 5).

Table 3. Cisco Nexus 9300-EX platform switch specifications

*

Typical and maximum power values are based on input drawn from the power circuit. The power supply value (for example,

650W AC power supply: NXA-PAC-650W-PI) is based on the output rating to the inside of the switch

Feature

Cisco Nexus 93180YC-FX

Cisco Nexus 93108TC-FX

Cisco Nexus 9348GC-FXP

Ports

48 x 10/25-Gbps and 6 x 40/100Gbps QSFP28 ports

48 x 10GBASE-T and 6 x 40/100Gbps QSFP28 ports

48 x 1-GBASE-T ports, 4 x 10/25-Gbps SFP28 ports and 2 x 40/100 QSFP28 ports

Downlink supported speeds

1/10/25-Gbps Ethernet 8/16/32-Gbps Fibre Channel

100-Mbps and 1/10-Gbps speeds

100-Mbps and 1-Gbps speeds

CPU

6 cores

4 cores

System memory

64 GB

24 GB

SSD drive

128 GB

System buffer

40 MB

Management ports

1 RJ-45 port L1 and L2 ports are unused

2 ports: 1 RJ-45 and 1 SFP+

USB ports

1 1 1

RS-232 serial ports

1 1 1

Power supplies (up to 2)

500W AC, 930W DC, or 1200W HVAC/HVDC

350W AC, 440W DC

Typical power (AC/DC)

260W

276W

178W

Maximum power (AC/DC)

425W

460W

287W

Input voltage (AC)

100 to 240V

Input voltage (high-voltage AC [HVAC])

200 to 277V

Input voltage (DC)

–48 to –60V

-36V to -72V

Input voltage (high-voltage DC [HVDC])

–240 to –380V

Frequency (AC)

50 to 60 Hz

Fans 4 4 3 Airflow

Port-side intake and exhaust

Physical dimensions (H x W x D)

1.72 x 17.3 x 22.5 in. (4.4 x 43.9 x 57.1 cm)

1.72 x 17.3 x 19.7 in. (4.4 x 43.9 x 49.9 cm)

Acoustics

57 dBA at 40% fan speed, 68.9 dBA at 70% fan speed, and 77.4 dBA at 100% fan speed

64.2 dBA at 40% fan speed, 68.9 dBA at 70% fan speed, and 77.8 dBA at 100% fan speed

67.5 dBA at 50% fan speed,

73.2 dBA at 70% fan speed, and 81.6 dBA at 100% fan speed

RoHS compliance

Yes

MTBF

238,470 hours

319,790 hours

257,860 hours

Feature

Cisco Nexus 9336C-FX2

Cisco Nexus 93240YC-FX2

Ports

36 x 40/100-Gbps QSFP28 ports

48 x 1/10/25-Gbps and 12 x 40/100-Gbps QSFP28 ports

Supported speeds

1/10/25/40/100-Gbps Ethernet Breakout supported on all ports, 1-36: 100G, 40G native, 4x10/25G (10G w/QSA) 1G w/QSA except ports 1-6 and 33-36

1/10/25-Gbps on downlinks 40/100-Gbps on uplinks Breakout not supported at FCS, future support in

roadmap

CPU

4 cores

System memory

24 GB

16 GB

SSD drive

128 GB

System buffer

40 MB

Table 4. Cisco Nexus 9300-FX platform switch specifications

Table 5. Cisco Nexus 9300-FX2 series switch specifications

Feature

Cisco Nexus 9336C-FX2

Cisco Nexus 93240YC-FX2

Management ports

2 ports: 1 RJ-45 and 1 SFP+

USB ports

1

RS-232 serial ports

1

Power supplies (up to 2)

1100W AC, 1100W DC, 1100W HVAC/HVDC

1100W AC

Typical power (AC)

367W

298W

Maximum power (AC)

777W

708W

Input voltage (AC)

100 to 240V

Input voltage (high-voltage AC [HVAC])

100 to 277V

Input voltage (DC)

–40 to –72V

Input voltage (high-voltage DC [HVDC])

–240 to –380V

Frequency (AC)

50 to 60 Hz

Fans

3 dual fan trays

5

Airflow

Port-side intake and exhaust

Physical dimensions (H x W x D)

1.72 x 17.3 x 24.5 in. (4.4 x 43.9 x 62.3 cm)

2.1 x 17.3 x 23.3 in. (5.3 x 43.9 x 59.1 cm)

Acoustics

76.2 dBA at 50% fan speed, 85.3 dBA at 70% fan speed, and 92.3 dBA at 100% fan speed

RoHS compliance

Yes

MTBF

352,590 hours

365,610 hours

Cisco NX-OS Software overview

NX-OS is a purpose-built data center operating system designed for performance, resiliency, scalability, manageability, and programmability at its foundation. It provides a robust and comprehensive feature set that meets the demanding requirements of virtualization and automation in present and future data centers. The Cisco Nexus 9000 Series uses an enhanced version of NX-OS with a single binary image that supports every switch in the series, simplifying image management. The operating system is modular, with a dedicated process for each routing protocol: a design that isolates faults while increasing availability. In the event of a process failure, the process can be restarted without loss of state. The operating system supports hot and cold patching and online diagnostics.

The software packaging for the Cisco Nexus 9000 Series offers flexibility and a comprehensive feature set while being consistent with Cisco Nexus access switches. The default system software has a comprehensive Layer 2 security and management feature set. To enable additional functions, including Layer 3 IP unicast and IP multicast routing and Cisco Nexus Data Broker, you must install additional licenses. The licensing guide illustrates the software packaging and licensing available to enable advanced features. For a complete list of supported features, refer to Cisco Feature Navigator.

Software requirements

The Cisco Nexus 9300-EX and 9300-FX platforms support the NX-OS operating system. NX-OS interoperates with any networking operating system, including Cisco IOS® Software, that conforms to the networking standards described in this data sheet.

For the latest software release information and recommendations, refer to the product bulletin at

https://www.cisco.com/go/nexus9000.

Item

Cisco Nexus 9300-EX Platform Switches

Cisco Nexus 9300-FX Series Switches

Cisco Nexus 9300-FX2 Series Switches

Maximum number of Longest Prefix Match (LPM) routes**

896,000

1,792,000

896,000

Maximum number of IP host entries**

896,000

1,792,000

896,000

Maximum number of MAC address entries**

256,000

512,000

256,000

Maximum number of multicast routes

32,000

Number of Interior Gateway Management Protocol (IGMP) snooping groups

Shipping: 8,000 Maximum: 32,000

Maximum number of Cisco Nexus 2000 Series Fabric Extenders per switch

16

Maximum number of Access Control List (ACL) entries

Per slice of the forwarding engine:

4000 ingress 2000 egress Total (2 forwarding slices): 8000 ingress 4000 egress

Single-slice forwarding engine: 5000 ingress 2000 egress

Per slice of the forwarding engine:

5000 ingress 2000 egress

Maximum number of VLANs

3,967

Number of Virtual Routing and Forwarding (VRF) instances

Shipping: 1,000 Maximum: 16,000

Maximum number of ECMP paths

64

Maximum number of port channels

512

Maximum number of links in a port channel

32

Number of active SPAN sessions

4 4 4

Maximum number of VLAN’s in Rapid perVLAN Spanning Tree (RPVST) instances

3,967

Maximum number of Hot-Standby Router Protocol (HSRP) groups

490

Number of Network Address Translation (NAT) entries

1,023

Maximum number of Multiple Spanning Tree (MST) instances

64

Flow-table size used for Cisco Tetration Analytics platform

***

64,000

32,000

64,000

Specifications

Table 6 lists the performance and scalability specifications for the Cisco Nexus 9300-EX and 9300-FX platform switches. (Check the software release notes for feature support information.)

Table 6. Hardware performance and scalability specifications*

*

More templates and greater scalability are on the roadmap. Refer to the Cisco Nexus 9000 Series Verified Scalability Guide

documentation for the latest exact scalability values validated for specific software

**

Raw capacity of flow table

Property

Description

Operating temperature

32 to 104°F (0 to 40°C)

Nonoperating (storage) temperature

–40 to 158°F (–40 to 70°C)

Humidity

5 to 95% (noncondensing)

Altitude

0 to 13,123 ft (0 to 4000m)

Component

Weight

Cisco Nexus 93180YC-EX without power supplies or fans

17.2 lb (7.8 kg)

Cisco Nexus 93108TC-EX without power supplies or fans

17.7 lb (8.0 kg)

Cisco Nexus 93180LC-EX without power supplies or fans

17.2 lb (7.8 kg)

Cisco Nexus 93180YC-FX without power supplies or fans

17.4 lb (7.9 kg)

Cisco Nexus 93108TC-FX without power supplies or fans

17.4 lb (7.9 kg)

Cisco Nexus 9348GC-FXP without power supplies or fans

14.2 lb (6.44 kg)

Cisco Nexus 9336C-FX2 without power supplies or fans

18.8 lb (8.5 kg)

Cisco Nexus 93240YC-FX2 without power supplies or fans

350W AC power supply

2.8 lb (1.27 kg)

500W AC power supply

2.42 lb (1.1 kg)

650W AC power supply

2.42 lb (1.1 kg)

1100W AC power supply

2.42 lb (1.1 kg)

930W DC power supply

2.42 lb (1.1 kg)

1200W HVDC/HVAC power supply

2.42 lb (1.1 kg)

Fan tray: NXA-FAN-30CFM-F or NXA-FAN-30CFM-B

0.92 lb (0.4 kg)

Fan tray: NXA-FAN-35CFM-F or NXA-FAN-35CFM-B

0.25 lb (0.1 kg)

Fan tray: NXA-FAN-65CFM-F or NXA-FAN-65CFM-B

0.6 lb (0.3 kg)

Specification

Description

Regulatory compliance

Products should comply with CE Markings according to directives 2004/108/EC and 2006/95/EC

Safety

NEBS

● UL 60950-1 Second Edition

● CAN/CSA-C22.2 No. 60950-1 Second Edition

● EN 60950-1 Second Edition

● IEC 60950-1 Second Edition

● AS/NZS 60950-1

● GB4943

Environmental properties

Table 7 lists the environmental properties, and Table 8 lists the weight for the Cisco Nexus 9300-EX and 9300-FX platform switches.

Table 7. Environmental properties

Table 8. Weight

Regulatory standards compliance

Table 9 summarizes regulatory standards compliance for the Cisco Nexus 9300-EX and 9300-FX platform switches.

Table 9. Regulatory standards compliance: safety and EMC

Specification

Description

EMC: Emissions

● 47CFR Part 15 (CFR 47) Class A

● AS/NZS CISPR22 Class A

● CISPR22 Class A

● EN55022 Class A

● ICES003 Class A

● VCCI Class A

● EN61000-3-2

● EN61000-3-3

● KN22 Class A

● CNS13438 Class A

EMC: Immunity

● EN55024

● CISPR24

● EN300386

● KN 61000-4 series

RoHS

The product is RoHS-6 compliant with exceptions for leaded-ball grid-array (BGA) balls and lead press-fit connectors.

Part Number

Product Description

Base Part Numbers

N9K-C93180YC-EX

Nexus 9K Fixed with 48p 1/10G/25G SFP and 6p 40G/100G QSFP28

N9K-C93108TC-EX

Nexus 9K Fixed with 48p 10G BASE-T and 6p 40G/100G QSFP28

N9K-C93180LC-EX

Nexus 9K Fixed with up to 32p 40/50G QSFP+ or up to 18p 100G QSFP28

N9K-C93180YC-FX

Nexus 9300 with 48p 1/10G/25G SFP and 6p 40G/100G QSFP28, MACsec, and Unified Ports capable

N9K-C93108TC-FX

Nexus 9300 with 48p 10G BASE-T and 6p 40G/100G QSFP28, MACsec capable

N9K-C9348GC-FXP

Nexus 9300 with 48p 100M/1G BASE-T, 4p 10/25G SFP28 and 2p 40G/100G QSFP28

N9K-C9336C-FX2

Nexus 9K Fixed with 36p 40G/100G QSFP28

N9K-C93240YC-FX2

Nexus 9K Fixed with 48p 1/10G/25G SFP and 12p 40G/100G QSFP28

Power Supplies

NXA-PAC-350W-PI

Nexus 9000 350W AC PS, Port-side Intake

NXA-PAC-350W-PE

Nexus 9000 350W AC PS, Port-side Exhaust

NXA-PAC-500W-PI

Nexus 9000 500W AC PS, Port-side Intake

NXA-PAC-500W-PE

Nexus 9000 500W AC PS, Port-side Exhaust

NXA-PAC-650W-PI

Nexus 9000 650W AC PS, Port-side Intake

NXA-PAC-650W-PE

Nexus 9000 650W AC PS, Port-side Exhaust

NXA-PAC-1100W-PI2

Nexus 9000 1100W AC PS, Port-side Intake

NXA-PAC-1100W-PE2

Nexus 9000 1100W AC PS, Port-side Exhaust

NXA-PDC-930W-PI

Nexus 9000 930W DC PS, Port-side Intake

NXA-PDC-930W-PE

Nexus 9000 930W DC PS, Port-side Exhaust

Supported optics modules

For details about the optics modules available and the minimum software release required for each supported module, visit

https://www.cisco.com/en/US/products/hw/modules/ps5455/products_device_support_tables_list.html.

Ordering information

Table 10 presents ordering information for the Cisco Nexus 9300-EX platform switches.

Table 10. Ordering information

Part Number

Product Description

UCSC-PSU-930WDC

Nexus 9000 930W DC PS, Port-side Intake

UCS-PSU-6332-DC

Nexus 9000 930W DC PS, Port-side Exhaust

N9K-PUV-1200W

Nexus 9300 1200W Universal Power Supply, Bi-directional air flow and Supports HVAC/HVDC

Fans

NXA-FAN-30CFM-F

Nexus Single Fan, 30CFM, port side exhaust airflow

NXA-FAN-30CFM-B

Nexus Single Fan, 30CFM, port side intake airflow

NXA-FAN-35CFM-F

Nexus Single Fan, 35CFM, port side exhaust airflow

NXA-FAN-35CFM-B

Nexus Single Fan, 35CFM, port side intake airflow

NXA-FAN-65CFM-F

Nexus Dual Fan, 65CFM, port side exhaust airflow

NXA-FAN-65CFM-B

Nexus Dual Fan, 65CFM, port side intake airflow

Software

N93-LAN1K9

Enhanced L3 including full OSPF, EIGRP, BGP

NX-OS-ES-GF

NX-OS Essential SW license for a 1G Nexus 9K Leaf

NX-OS-AD-GF

NX-OS Advantage SW license for a 1G Nexus 9K Leaf

NX-OS-ES-XF

NX-OS Essential SW license for a 10/25/40G+ Nexus 9K Leaf

NX-OS-AD-XF

NX-OS Advantage SW license for a 10/25/40G+ Nexus 9K Leaf

Power Cords

CAB-250V-10A-AR

AC Power Cord - 250V, 10A - Argentina (2.5 meter)

CAB-250V-10A-BR

AC Power Cord - 250V, 10A - Brazil (2.1 meter)

CAB-250V-10A-CN

AC Power Cord - 250V, 10A - PRC (2.5 meter)

CAB-250V-10A-ID

AC Power Cord - 250V, 10A, South Africa (2.5 meter)

CAB-250V-10A-IS

AC Power Cord - 250V, 10A - Israel (2.5 meter)

CAB-9K10A-AU

Power Cord, 250VAC 10A 3112 Plug, Australia (2.5 meter)

CAB-9K10A-EU

Power Cord, 250VAC 10A CEE 7/7 Plug, EU (2.5 meter)

CAB-9K10A-IT

Power Cord, 250VAC 10A CEI 23-16/VII Plug, Italy (2.5 meter)

CAB-9K10A-SW

Power Cord, 250VAC 10A MP232 Plug, SWITZ (2.5 meter)

CAB-9K10A-UK

Power Cord, 250VAC 10A BS1363 Plug (13 A fuse), UK (2.5 meter)

CAB-9K12A-NA

Power Cord, 125VAC 13A NEMA 5-15 Plug, North America (2.5 meter)

CAB-AC-L620-C13

North America, NEMA L6-20-C13 (2.0 meter)

CAB-C13-C14-2M

Power Cord Jumper, C13-C14 Connectors, 2 Meter Length (2 meter)

CAB-C13-C14-AC

Power cord, C13 to C14 (recessed receptacle), 10A (3 meter)

CAB-C13-CBN

Cabinet Jumper Power Cord, 250 VAC 10A, C14-C13 Connectors (0.7 meter)

CAB-IND-10A

10A Power cable for India (2.5 meter)

CAB-N5K6A-NA

Power Cord, 200/240V 6A North America (2.5 meter)

CAB-HVAC-SD-0.6M

HVAC Power cable for Anderson-LS-25

CAB-HVAC-C14-2M

HVAC power cable for C14, 2 meters (no more than 240 V)

CAB-HVAC-RT-0.6M

HVAC Power cable with right angle connector for RF-LS-25

Accessories

N3K-C3064-ACC-KIT

Nexus 3K/9K Fixed Accessory Kit

Warranty

The Cisco Nexus 9300-EX and 9300-FX platforms have a 1-year limited hardware warranty. The warranty includes hardware replacement with a 10-day turnaround from receipt of a Return Materials Authorization (RMA).

Printed in USA C78-736651-21 05/18

Service and support

Cisco offers a range of professional, solution, and product support services for each stage of your Cisco Nexus 9300-EX or 9300-FX platform deployment:

●

Cisco Data Center Quick Start Service for Cisco Nexus 9000 Series Switches: This offering provides consulting services that include technical advice and assistance to help deploy Cisco Nexus 9000 Series Switches.

●

Cisco Data Center Accelerated Deployment Service for Cisco Nexus 9000 Series Switches: This service delivers planning, design, and implementation expertise to bring your project into production. The service also provides recommended next steps, an architectural high-level design, and operation-readiness guidelines to scale the implementation to your environment.

●

Cisco Migration Service for Cisco Nexus 9000 Series Switches: This service helps you migrate from Cisco Catalyst® 6000 Series Switches to Cisco Nexus 9000 Series Switches.

●

Cisco Product Support: Support service is available globally 24 hours a day, 7 days a week, for Cisco software and hardware products and technologies associated with Cisco Nexus 9000 Series Switches. Enhanced support options delivered by Cisco also include solution support for Cisco ACI, Cisco SMARTnet™ Service, and Cisco Smart Net Total Care™* service.

For more information, visit https://www.cisco.com/go/services.

*

For Cisco products only

Cisco Capital financing

Cisco Capital® financing can help you acquire the technology you need to achieve your objectives and stay competitive. We can help you reduce Capital Expenditures (CapEx), accelerate your growth, and optimize your investment dollars and ROI. Cisco Capital financing gives you flexibility in acquiring hardware, software, services, and complementary third-party equipment. And there’s just one predictable payment. Cisco Capital financing is available in more than 100 countries. Learn more.

For more information

For more information about the Cisco Nexus 9000 Series and latest software release information and recommendations, visit https://www.cisco.com/go/nexus9000.

Cisco Nexus 9300-EX, Nexus 9300-FX User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual