Cisco Linksys EZXS88W, Linksys EZXS55W, Linksys EZXS16W User Manual

USER GUIDE
EtherFast 10/100 5/8/16-Port
Workgroup Switch
Models: EZXS55W, EZXS88W, EZXS16W
About This Guide
Icon Descriptions
While reading through the User Guide you may see various icons that call attention to specific items. Below is a description of these icons:
NOTE: This check mark indicates that there is
a note of interest and is something that you should pay special attention to while using the product.
WARNING: This exclamation point indicates
that there is a caution or warning and it is something that could damage your property or product.
About This Guide
WEB: This globe icon indicates a noteworthy
website address or e-mail address.
Online Resources
Website addresses in this document are listed without http:// in front of the address because most current web browsers do not require it. If you use an older web browser, you may have to add http:// in front of the web address.
Resource Website
Linksys www.linksys.com
Linksys International www.linksys.com/international
Glossary www.linksys.com/glossary
Network Security www.linksys.com/security
Copyright and Trademarks
Linksys, Cisco and the Cisco Logo are registered trademarks or trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2008 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders.
i
Table of Contents
Chapter 1: Product Overview 1
Front Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Appendix A: Troubleshooting 2
Appendix B: Specications 3
Appendix C: Warranty Information 4
Limited Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Appendix D: Regulatory Information 6
FCC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Safety Notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Industry Canada Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste
Electric and Electronic Equipment (WEEE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Appendix E: Software End User License Agreement 11
Cisco Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Software Licenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
ii
Chapter 1
Product Overview
Chapter 1: Product Overview
Thank you for choosing the Linksys Metro Wireless Internet Adapter. The Metro Wireless Internet Adapter is the simple alternative for Internet connectivity in your home. Because the Internet link is wireless, you can get on without the hassle of a wired telephone or cable connection. The high-powered radio creates a strong, fast connection to the Metro Wireless Internet. Connect your PC directly to the Adapter, or add a wireless access point or network switch to connect multiple PCs – the built-in DHCP server automatically provides Internet addresses to all your PCs.
Front Panel
Front Panel of EZXS55W
Power (Green) Each time your Switch powers
up, it will run a diagnostic/self-test. After the test, the Power LED will ight up and will stay on while the Switch is powered on.
Link/Act (Green) This LED lights up solid when
the Switch is connected to a device through the Ethernet port. If the LED is flashing, the Switch is sending or receiving data over that port.
100 (Green) This LED indicates the speed of the
connection over the Ethernet port. When the LED lights up, the speed is 100 Mbps. When the LED does not light up, the speed is 10 Mbps.
FD/Col (Green) This LED indicates if the
Ethernet port is in full or half duplex mode. When the LED is lit, the mode is Full Duplex. When the LED is not lit, the mode is Half Duplex. When the LED flashes, the port has a data collision error; check if your cabling is installed properly and all connections are secure.
Back Panel
Back Panel of EZXS55W
Back Panel of EZXS16W
Ethernet 1-5 (EZXS55W), Ethernet 1-8 (EZXS88W), Ethernet 1-16 (EZXS16W) The Ethernet ports
connect the Switch to a wired PC or other Ethernet network device.
Uplink (EZXS55W and EZXS88W only) The
Uplink port connects the Switch to a router or to another switch.
MDI/MDIX (EZXS16W only) When the MDI/
MDIX button is pressed in, port 16 will function as an Uplink port. When this button is not pressed in, port 16 functions as a normal 10/100 port.
Power The Power port is where you will
connect the power adapter.
NOTE TO USERS OF 10/100 5- OR 8-PORT SWITCH (EZXS55W OR EZXS88W): If you
connect a router or additional switch to the Uplink port, then you cannot use the numbered port next to the Uplink port (port 5 on the 5-Port Switch or port 8 on the 8-Port Switch will be inactive). The two ports are wired together, so they cannot be used simultaneously.
1
Appendix A
Appendix A: Troubleshooting
I can’t connect to the Internet.
Verify the proper LEDs are lit on the Switch.1.
Make sure the Power LED has a steady green light and is not flashing.
Verify the Ethernet LED has a fairly steady green light. It will flash occasionally, indicating activity.
Power down everything, and power on each device in 2. the following order:
Switch PC
WEB: If your questions are not addressed here,
refer to the Linksys website, www.linksys.com
Troubleshooting
2
Appendix B
Specifications
Appendix B: Specifications
EZXS55W
Model EZXS55W (10/100 5-Port Workgroup Switch)
Standards IEEE 802.3, IEEE802.3u Ports Five 10/100 RJ-45 Ports,
One Shared RJ-45 Uplink Port
LEDs Power, Link/Act*, FD/Col*, 100* (*per port)
Cabling Type UTP Category 5 or better
Environmental
Dimensions 4.33" x 1.26" x 3.43" (110 x 32 x 87 mm)
Weight 6.00 oz (170 g) Power 7.5V DC, 700 mA Certification FCC Class B, CE, ICES-003 Operating Temp. 32 to 122ºF (0 to 50ºC) Storage Temp. -4 to 158ºF (-20 to 70ºC) Operating Humidity 10 to 85% Noncondensing Storage Humidity 5 to 90% Noncondensing
EZXS88W
Model EZXS88W (10/100 8-Port Workgroup Switch)
Standards IEEE 802.3, IEEE802.3u Ports Eight 10/100 RJ-45 Ports,
One Shared RJ-45 Uplink Port
LEDs Power, Link/Act*, FD/Col*, 100* (*per port)
Cabling Type UTP Category 5 or better
EZXS16W
Model EZXS16W (10/100 16-Port Workgroup Switch)
Standards IEEE 802.3, IEEE802.3u Ports Sixteen 10/100 RJ-45 Ports Buttons One MDI/MDIX Button LEDs Power, Link/Act*, FD/Col*,
100* (*per port)
Cabling Type UTP Category 5 or better
Environmental
Dimensions 7.24” x 2.52” x 5.98” (184 x 64 x 152 mm)
Weight 16.93 oz (480 g) Power 3.3V DC, 3 A Certification FCC Class B, CE, ICES-003 Operating Temp. 32 to 122ºF (0 to 50ºC) Storage Temp. -4 to 158ºF (-20 to 70ºC) Operating Humidity 10 to 85% Noncondensing Storage Humidity 5 to 90% Noncondensing
Specifications are subject to change without notice.
Environmental
Dimensions 6.30” x 1.38” x 4.33" (160 x 35 x 110 mm)
Weight 8.82 oz (250 g) Power 9V DC, 800 mA Certification FCC Class B, CE, ICES-003 Operating Temp. 32 to 122ºF (0 to 50ºC) Storage Temp. -4 to 158ºF (-20 to 70ºC) Operating Humidity 10 to 85% Noncondensing Storage Humidity 5 to 90% Noncondensing
3
Appendix C
Warranty Information
Appendix C: Warranty Information
Limited Warranty
Linksys warrants this Linksys hardware product against defects in materials and workmanship under normal use for the Warranty Period, which begins on the date of purchase by the original end-user purchaser and lasts for the period specified below:
One (1) year for new product
Ninety (90) days for refurbished product
This limited warranty is non-transferable and extends only to the original end-user purchaser. Your exclusive remedy and Linksys’ entire liability under this limited warranty will be for Linksys, at its option, to (a) repair the product with new or refurbished parts, (b) replace the product with a reasonably available equivalent new or refurbished Linksys product, or (c) refund the purchase price of the product less any rebates. Any repaired or replacement products will be warranted for the remainder of the original Warranty Period or thirty (30) days, whichever is longer. All products and parts that are replaced become the property of Linksys.
Exclusions and Limitations
This limited warranty does not apply if: (a) the product assembly seal has been removed or damaged, (b) the product has been altered or modified, except by Linksys, (c) the product damage was caused by use with non-Linksys products, (d) the product has not been installed, operated, repaired, or maintained in accordance with instructions supplied by Linksys, (e) the product has been subjected to abnormal physical or electrical stress, misuse, negligence, or accident, (f) the serial number on the Product has been altered, defaced, or removed, or (g) the product is supplied or licensed for beta, evaluation, testing or demonstration purposes for which Linksys does not charge a purchase price or license fee.
ALL SOFTWARE PROVIDED BY LINKSYS WITH THE PRODUCT, WHETHER FACTORY LOADED ON THE PRODUCT OR CONTAINED ON MEDIA ACCOMPANYING THE PRODUCT, IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND. Without limiting the foregoing, Linksys does not warrant that the operation of the product or software will be uninterrupted or error free. Also, due to the continual development of new techniques for intruding upon and attacking networks, Linksys does not warrant that the product, software or any equipment, system or network on which the product or software is used will be free of vulnerability to intrusion or attack. The product may include or be bundled with third party software or
service offerings. This limited warranty shall not apply to such third party software or service offerings. This limited warranty does not guarantee any continued availability of a third party’s service for which this product’s use or operation may require.
TO THE EXTENT NOT PROHIBITED BY LAW, ALL IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE DURATION OF THE WARRANTY PERIOD. ALL OTHER EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF NON-INFRINGEMENT, ARE DISCLAIMED. Some jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This limited warranty gives you specific legal rights, and you may also have other rights which vary by jurisdiction.
TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT WILL LINKSYS BE LIABLE FOR ANY LOST DATA, REVENUE OR PROFIT, OR FOR SPECIAL, INDIRECT, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, REGARDLESS OF THE THEORY OF LIABILITY (INCLUDING NEGLIGENCE), ARISING OUT OF OR RELATED TO THE USE OF OR INABILITY TO USE THE PRODUCT (INCLUDING ANY SOFTWARE), EVEN IF LINKSYS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT WILL LINKSYS’ LIABILITY EXCEED THE AMOUNT PAID BY YOU FOR THE PRODUCT. The foregoing limitations will apply even if any warranty or remedy provided under this limited warranty fails of its essential purpose. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
Obtaining Warranty Service
If you have a question about your product or experience a problem with it, please go to www.linksys.com/support where you will find a variety of online support tools and information to assist you with your product. If the product proves defective during the Warranty Period, contact Linksys Technical Support for instructions on how to obtain warranty service. The telephone number for Linksys Technical Support in your area can be found in the product User Guide and at www.linksys.com. Have your product serial number and proof of purchase on hand when calling. A DATED PROOF OF ORIGINAL PURCHASE IS REQUIRED TO PROCESS WARRANTY CLAIMS. If you are requested to return your product, you will be given a Return Materials Authorization (RMA) number. You are responsible for properly packaging and shipping your product to Linksys at your cost and risk. You must include the RMA number and a copy of your dated proof of original purchase when returning your product. Products received without a RMA number and dated proof of original purchase will be
4
Appendix C
rejected. Do not include any other items with the product you are returning to Linksys. Defective product covered by this limited warranty will be repaired or replaced and returned to you without charge. Customers outside of the United States of America and Canada are responsible for all shipping and handling charges, custom duties, VAT and other associated taxes and charges. Repairs or replacements not covered under this limited warranty will be subject to charge at Linksys’ then-current rates.
Technical Support
This limited warranty is neither a service nor a support contract. Information about Linksys’ current technical support offerings and policies (including any fees for support services) can be found at: www.linksys.com/support.
This limited warranty is governed by the laws of the jurisdiction in which the Product was purchased by you.
Please direct all inquiries to: Linksys, P.O. Box 18558, Irvine, CA 92623.
Warranty Information
5
Appendix D
Regulatory Information
Appendix D: Regulatory Information
FCC Statement
This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment or devices
Avis d’Industrie Canada
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Le fonctionnement est soumis aux conditions suivantes :
Ce périphérique ne doit pas causer d’interférences; 1. Ce périphérique doit accepter toutes les interférences 2.
reçues, y compris celles qui risquent d’entraîner un fonctionnement indésirable.
Connect the equipment to an outlet other than the receiver’s
Consult a dealer or an experienced radio/TV technician for assistance
Safety Notices
Caution: To reduce the risk of fire, use only No.26 AWG or larger telecommunication line cord.
Do not use this product near water, for example, in a wet basement or near a swimming pool.
Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.
WARNING: This product contains lead, known
to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Operation is subject to the following two conditions:
This device may not cause interference and1. This device must accept any interference, including 2.
interference that may cause undesired operation of the device.
6
Loading...
+ 18 hidden pages