While reading through the User Guide you may see
various icons that call attention to specific items. Below is
a description of these icons:
NOTE: This check mark indicates that there is
a note of interest and is something that you
should pay special attention to while using the
product.
WARNING: This exclamation point indicates
that there is a caution or warning and it is
something that could damage your property or
product.
About This Guide
WEB: This globe icon indicates a noteworthy
website address or e-mail address.
Online Resources
Website addresses in this document are listed without
http:// in front of the address because most current web
browsers do not require it. If you use an older web browser,
you may have to add http:// in front of the web address.
ResourceWebsite
Linksyswww.linksys.com
Linksys International www.linksys.com/international
Thank you for choosing the Linksys Metro Wireless
Internet Adapter. The Metro Wireless Internet Adapter is
the simple alternative for Internet connectivity in your
home. Because the Internet link is wireless, you can get
on without the hassle of a wired telephone or cable
connection. The high-powered radio creates a strong, fast
connection to the Metro Wireless Internet. Connect your
PC directly to the Adapter, or add a wireless access point
or network switch to connect multiple PCs – the built-in
DHCP server automatically provides Internet addresses to
all your PCs.
Front Panel
Front Panel of EZXS55W
Power (Green) Each time your Switch powers
up, it will run a diagnostic/self-test. After the
test, the Power LED will ight up and will stay on
while the Switch is powered on.
Link/Act (Green) This LED lights up solid when
the Switch is connected to a device through the
Ethernet port. If the LED is flashing, the Switch
is sending or receiving data over that port.
100 (Green) This LED indicates the speed of the
connection over the Ethernet port. When the
LED lights up, the speed is 100 Mbps. When the
LED does not light up, the speed is 10 Mbps.
FD/Col (Green) This LED indicates if the
Ethernet port is in full or half duplex mode. When
the LED is lit, the mode is Full Duplex. When the
LED is not lit, the mode is Half Duplex. When the
LED flashes, the port has a data collision error;
check if your cabling is installed properly and all
connections are secure.
connect the Switch to a wired PC or other
Ethernet network device.
Uplink (EZXS55W and EZXS88W only) The
Uplink port connects the Switch to a router or
to another switch.
MDI/MDIX (EZXS16W only) When the MDI/
MDIX button is pressed in, port 16 will function
as an Uplink port. When this button is not
pressed in, port 16 functions as a normal 10/100
port.
Power The Power port is where you will
connect the power adapter.
NOTE TO USERS OF 10/100 5- OR 8-PORT
SWITCH (EZXS55W OR EZXS88W): If you
connect a router or additional switch to the
Uplink port, then you cannot use the numbered
port next to the Uplink port (port 5 on the
5-Port Switch or port 8 on the 8-Port Switch will
be inactive). The two ports are wired together,
so they cannot be used simultaneously.
EtherFast 10/100 5/8/16-Port Workgroup Switch
1
Appendix A
Appendix A:
Troubleshooting
I can’t connect to the Internet.
Verify the proper LEDs are lit on the Switch.1.
Make sure the Power LED has a steady green light •
and is not flashing.
Verify the Ethernet LED has a fairly steady green •
light. It will flash occasionally, indicating activity.
Power down everything, and power on each device in 2.
the following order:
Switch•
PC•
WEB: If your questions are not addressed here,
refer to the Linksys website, www.linksys.com
Troubleshooting
EtherFast 10/100 5/8/16-Port Workgroup Switch
2
Appendix B
Specifications
Appendix B:
Specifications
EZXS55W
Model EZXS55W (10/100 5-Port
Workgroup Switch)
Standards IEEE 802.3, IEEE802.3u
Ports Five 10/100 RJ-45 Ports,
One Shared RJ-45 Uplink
Port
LEDs Power, Link/Act*, FD/Col*,
100*
(*per port)
Cabling Type UTP Category 5 or better
Environmental
Dimensions 110 x 32 x 87 mm
Weight 170 g
Power 7,5V DC, 700 mA
Certification FCC Class B, CE, ICES-003
Operating Temp. 0 to 50ºC
Storage Temp. –20 to 70ºC
Operating Humidity 10 to 85% Noncondensing
Storage Humidity 5 to 90% Noncondensing
Dimensions 184 x 64 x 152 mm
Weight 480 g
Power 3,3V DC, 3 A
Certification FCC Class B, CE, ICES-003
Operating Temp. 0 to 50ºC
Storage Temp. –20 to 70ºC
Operating Humidity 10 to 85% Noncondensing
Storage Humidity 5 to 90% Noncondensing
Specifications are subject to change without notice.
Environmental
Dimensions 160 x 35 x 110 mm
Weight 250 g
Power 9V DC, 800 mA
Certification FCC Class B, CE, ICES-003
Operating Temp. 0 to 50ºC
Storage Temp. –20 to 70ºC
Operating Humidity 10 to 85% Noncondensing
Storage Humidity 5 to 90% Noncondensing
EtherFast 10/100 5/8/16-Port Workgroup Switch
3
Appendix C
Warranty Information
Appendix C:
Warranty Information
Limited Warranty
Linksys warrants that this Linksys hardware product will be
substantially free of defects in materials and workmanship
arising under normal use during the Warranty Period,
which begins on the date of purchase by the original enduser purchaser and lasts for the period specified below:
Two (2) years for new product•
Ninety (90) days for refurbished product•
This limited warranty is non-transferable and extends only
to the original end-user purchaser. Your exclusive remedy
and Linksys’ entire liability under this limited warranty
will be for Linksys, at its option, to (a) repair the product
with new or refurbished parts, (b) replace the product
with a reasonably available equivalent new or refurbished
Linksys product, or (c) refund the purchase price of the
product less any rebates. Any repaired or replacement
products will be warranted for the remainder of the
original Warranty Period or thirty (30) days, whichever is
longer. All products and/or parts that are replaced become
the property of Linksys.
This limited warranty shall apply in addition to any
statutory or other rights which you may have under a
contract of sale.
Exclusions and Limitations
This limited warranty does not apply if: (a) the product
assembly seal has been removed or damaged, (b) the
product has been altered or modified, except by Linksys,
(c) the product damage was caused by use with nonLinksys products, (d) the product has not been installed,
operated, repaired, or maintained in accordance with
instructions supplied by Linksys, (e) the product has
been subjected to abnormal physical or electrical stress,
misuse, negligence, or accident, (f ) the serial number on
the Product has been altered, defaced, or removed, or (g)
the product is supplied or licensed for beta, evaluation,
testing or demonstration purposes for which Linksys does
not charge a purchase price or license fee.
ALL SOFTWARE PROVIDED BY LINKSYS WITH THE PRODUCT,
WHETHER FACTORY LOADED ON THE PRODUCT OR
CONTAINED ON MEDIA ACCOMPANYING THE PRODUCT,
IS PROVIDED “AS IS” WITHOUT ANY WARRANTY OF ANY
KIND. Without limiting the foregoing, Linksys does not
warrant that the operation of the product or software will
be uninterrupted or error free. Also, due to the continual
development of new techniques for intruding upon and
attacking networks, Linksys does not warrant that the
product, service, software or any equipment, system or
network on which the product or software is used will be
free of vulnerability to intrusion or attack. The product
may include or be bundled with third party software or
service offerings. This limited warranty shall not apply to
such third party software or service offerings. This limited
warranty does not guarantee any continued availability
of a third party’s service for which this product’s use or
operation may require.
TO THE EXTENT NOT PROHIBITED BY LAW, ALL IMPLIED
WARRANTIES AND CONDITIONS OF MERCHANTABILITY,
SATISFACTORY QUALITY OR FITNESS FOR A PARTICULAR
PURPOSE ARE LIMITED TO THE DURATION OF THE
WARRANTY PERIOD. ALL OTHER EXPRESS OR IMPLIED
CONDITIONS, REPRESENTATIONS AND WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTY OF NON-INFRINGEMENT, ARE DISCLAIMED.
Some jurisdictions do not allow limitations on how long
an implied warranty lasts, so the above limitation may not
apply to you. This limited warranty gives you specific legal
rights, and you may also have other rights which vary by
jurisdiction.
TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT
WILL LINKSYS BE LIABLE FOR ANY LOST DATA, REVENUE
OR PROFIT, OR FOR SPECIAL, INDIRECT, CONSEQUENTIAL,
INCIDENTAL OR PUNITIVE DAMAGES, REGARDLESS OF THE
THEORY OF LIABILITY (INCLUDING NEGLIGENCE), ARISING
OUT OF OR RELATED TO THE USE OF OR INABILITY TO
USE THE PRODUCT (INCLUDING ANY SOFTWARE), EVEN
IF LINKSYS HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN NO EVENT WILL LINKSYS’ LIABILITY
EXCEED THE AMOUNT PAID BY YOU FOR THE PRODUCT.
The foregoing limitations will apply even if any warranty
or remedy provided under this limited warranty fails of
its essential purpose. Some jurisdictions do not allow
the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not
apply to you.
Obtaining Warranty Service
If you have a question about your product or experience a
problem with it, please go to www.linksys.com/support
where you will find a variety of online support tools and
information to assist you with your product. If the product
proves defective during the Warranty Period, contact
Linksys Technical Support for instructions on how to
obtain warranty service. The telephone number for Linksys
Technical Support in your area can be found in the product
User Guide and at www.linksys.com. Have your product
serial number and proof of purchase on hand when calling.
A DATED PROOF OF ORIGINAL PURCHASE IS REQUIRED
TO PROCESS WARRANTY CLAIMS. If you are requested to
return your product, you will be given a Return Materials
Authorization (RMA) number. You are responsible for
properly packaging and shipping your product to Linksys
at your cost and risk. You must include the RMA number
EtherFast 10/100 5/8/16-Port Workgroup Switch
4
Appendix C
and a copy of your dated proof of original purchase when
returning your product. Products received without a RMA
number and dated proof of original purchase will be
rejected. Do not include any other items with the product
you are returning to Linksys. Defective product covered
by this limited warranty will be repaired or replaced and
returned to you without charge. Customers outside of
the United States of America and Canada are responsible
for all shipping and handling charges, custom duties,
VAT and other associated taxes and charges. Repairs or
replacements not covered under this limited warranty will
be subject to charge at Linksys’ then-current rates.
Technical Support
This limited warranty is neither a service nor a
support contract. Information about Linksys’ current
technical support offerings and policies (including
any fees for support services) can be found at
www.linksys.com/support
Warranty Information
General
This limited warranty is governed by the laws of the
jurisdiction in which the Product was purchased by you.
If any portion of this limited warranty is found to be void
or unenforceable, its remaining provisions shall remain in
full force and effect.
Please direct all inquiries to: Linksys, P.O. Box 18558, Irvine,
CA 92623.
For more information, please contact us
www.linksys.com
Select your country, and then select SUPPORT/
TECHNICAL
For product returns:
Select your Country and then select CUSTOMER SUPPORT
EtherFast 10/100 5/8/16-Port Workgroup Switch
5
Loading...
+ 17 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.