Cisco IP 7960, SPA 501G, SPA 502G, SPA 504G, SPA 508G Configuration Manual

Cisco

IP Phone

Configuration Guides

Yeastar Technology Co., Ltd.

Cisco IP Phone Configuration Guides

www.yeastar.com Page 2

Table of Cotents

Introduction ............................................................................................. 3

Register Cisco IP Phone with MyPBX Manually ......................................... 4

Provisioning for MyPBX ............................................................................ 7

Cisco IP Phone Configuration Guides

www.yeastar.com Page 3

Introduction

This guide is applicable to CISCO IP 7940, IP7960, SPA 501G, 502G, 504G,
508G, 509G, 514G, 512G, 525G2.

Please Note:

This guide has been tested with firmware version 7.4.6. Be aware that different
firmware versions may have different web interface formats and functionality.
This is based on a new phone OR one that has been reset to factory defaults. If
in doubt, reset the phone to Factory Defaults.

Cisco IP Phone Configuration Guides

www.yeastar.com Page 4

0BRegister Cisco IP Phone with MyPBX Manually

1. Start up the phone and identify its IP Address – using the menu key on the

phone, go to the "Network" option and press the "Select" button. For this
example we will assume the IP Address of the phone is 192.168.5.126, and
IP Address of the MyPBX machine is 192.168.5.150.

2. Point your browser to the web interface of the phone: http://192.168.5.126

3. Click on the "Admin Login" link, and next click on the "Advanced" link at the

top of the page to the phone's advanced administration page

Figure 1-1

4. We now need to set the phone to register with MyPBX. Click on the "Ext1"

tab, and configure as follows:

1) Set the "Line Enable" field to "yes

Figure 1-2

2) In the "Proxy and Registration" section, set the "Proxy" field to the IP

Address of the MyPBX server – in this example, 192.168.5.150.

Figure 1-3

3) In the “Subscriber Information” section:

Figure 1-4