Cisco IE 1000 User Manual

© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 1 of 8

Data Sheet

Cisco Industrial Ethernet 1000 Series Switches

Product Overview

The Cisco® Industrial Ethernet (IE) 1000 Series Switches are compact rugged switches aimed to operational
technology (OT) users with limited IT network knowledge. The IE 1000 Series Switches provide an easy
transformation from the legacy factory to digital solution. For machine builders and machine-to-machine (M2M)
solutions is an attractive entry level product as a GUI-based, lightly-managed switch. The IE 1000 is a good fit for
locations with harsh temperatures and small spaces, and is Power over Ethernet (PoE) capable with and zero IT
management.

The IE 1000 is ideal for industrial Ethernet applications where small and easy-to-be-managed hardened products
are required, including factory automation, intelligent transportation systems, city-surveillance programs, building
automations etc.

The Cisco IE 1000 Series Switches complement the current industrial Ethernet portfolio of related Cisco industrial
switches, such as the Cisco IE 2000, IE 3000, IE 4000 and IE 5000 Series managed Switches.

The IE 1000 can be easily installed on your network. Through a user-friendly web device manager, the IE 1000
provides easy out-of-the-box configuration and simplified operational manageability to deliver advanced and secure
multiservices over industrial networks.

Features and Benefits

The Cisco IE 1000 Series Switches are designed for low cost, low ports, and small sizes. They offer:

●

Scalability: Four models are available supporting 5, 6, 8 and 10 Ethernet ports, with Fast Ethernet (FE) and
Gigabit Ethernet (GE), copper and fiber uplinks options

●

Easy integration: Zero-touch IP discovery or Dynamic Host Configuration Protocol (DHCP)IP addressing
and simple web GUI-based management

●

Fast startup time: Starts 30 seconds from cold boot

●

Manageability: Web GUI interface, and diagnostics and analysis options through Simple Network
Management Protocol (SNMP) and syslog

●

Security: secure access; port-security

●

Minimize data load: VLAN aware, Internet Group Management Protocol (IGMP) and DHCP snooping to
filter unwanted data

●

Lightly-managed: Spanning-tree protocol (STP), Link Layer Discovery Protocol (LLDP), Cisco Discovery
Protocol aware

●

Gigabit uplink: Two fiber-optic SFP based. uplink for up to 50 miles (80 kilometers) links

●

Industrial PoE: Up to eight PoE (IEEE 802.af) and PoE+ (802.3at) supported on selected models

●

Redundant voltage feeds, alarm relays support and DIN rail mount

●

Industrial environmental compliance and certifications: Ethernet/IP (CIP)

© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 2 of 8

Product Number

Total Ports

Fast Ethernet
Copper Uplink

GE SFP Uplink

Fast Ethernet Copper
Downlink

PoE/PoE+

Input Power
Voltage

IE-1000-4T1T-LM

5 1 4

12-24V

IE-1000-6T2T-LM

8 2 6

12-24V

IE-1000-4P2S-LM

6 2 4

48-54V

IE-1000-8P2S-LM

10 2 8

48-54V

Product Number

Rated Nominal Input
Operating Range

Supported Input
Voltage Operating
Range

Power Output

PoE/PoE+ Support

Use Case Scenario

PWR-IE50W-AC=

AC 100-240V/1.25A
50-60Hz
Or
DC 125-250V/1.25A

AC 90-264V
Or
DC 106-300V

24VDC/2.1A

No

Provides power to
non-PoE PIDs

PWR-IE50W-AC­IEC=

AC 100-240V/1.25A
50-60Hz

AC 90-264V

24VDC/2.1A

No

Provides power to
non-PoE PIDs

PWR-IE65W-PC-AC=

AC 100-240V/1.4A
50-60Hz
Or
DC 125-250V/1.0A

AC 90-264V
Or
DC 106-300V

54VDC/1.2 A

Yes

Supports up to 3 ports
PoE or 1 PoE+ port
when used in PoE
power input in an AC
or high DC
environment

Product Specifications

Figure 1 shows switch models, and Table 1 shows the Cisco IE 1000 Series Switches configuration information.
Table 2 lists the SKUs for power supplies. Table 3 includes the 1000 product specifications. Table 4 lists software
features. Table 5 includes compliance specifications. Table 6 outlines management and relevant industry
standards.

Figure 1. Cisco Industrial Ethernet 1000 Series Switches

Table 1. Cisco IE 1000 Series Switches Configurations

Table 2. Power Supplies and Mounting Kit Available for Cisco IE 1000 Series Switches

© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 3 of 8

Product Number

Rated Nominal Input
Operating Range

Supported Input
Voltage Operating
Range

Power Output

PoE/PoE+ Support

Use Case Scenario

PWR-IE65W-PC-DC=

DC 24-48VDC/4.5A

DC 18-60V

54VDC/1.2 A

Yes

Supports up to 3 ports
PoE or 1 PoE+ port
when used in a DC
environment

PWR-IE170W-PC­AC=

AC 100-240V/2.3A
50-60Hz
Or
DC 125-250V/2.1A

AC 90-264V
Or
DC 106-300V

54VDC/3.15A

Yes

Support up to 8 ports
PoE or 5 PoE+ ports
when used in AC
environment

PWR-IE170W-PC­DC=

DC 12-54V/23A

DC 10.8-60V

54VDC/3.15A

Yes

Support up to 8 ports
PoE or 5 PoE+ ports
when used in DC
environment

STK-RACK­DINRAIL=

19 in. DIN Rail mount
kit

Description

Specification

Hardware

●

DRAM: 128 MB DDR2 without ECC

●

Onboard flash memory: 160 MB

Alarm ● Alarm I/O: output connector on top panel of 4P2S and 8P2S, 1.0A@24VDC or 0.5A@48VDC

Power consumption

●

IE1000-4T1T: 4.2W

●

IE1000-6T2T: 5.3W

●

IE1000-4P2S: without PoE 8.6W, with PoE 72-140.4W

●

IE1000-8P2S: without PoE 10.6W, with PoE 134.4-205.2W

Connectors and
cabling

●

100BASE-FX MMF (2 km)—TBD with engineer input

●

10/100/1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling

Dimensions
(H x W x D)

including DIN rail

●

IE-1000-4T1T-LM: 5.0” H x 1.50” W x 4.5” D (127mm H x 38mm W x 115mm D)

●

IE-1000-6T2T-LM: 5.0” H x 1.8” W x 4.5” D (127mm H x 45.7mm W x 115mm D)

●

IE-1000-4P2S-LM, IE-1000-8P2S-LM: 5.0”H x 1.8” W x 5.3”D (127mm H x 45.7mmW x 134mm D)

●

PWR-IE50W-AC=: 5.8"H x 2.0"W x 4.4"D (147mm H x 51 mm W x 112mm D)

●

PWR-65W-PC-AC=: 5.9 "H x 2.6”W x 4.6”D (150mm H x 66mm W x 117mm D)

●

PWR-65W-PC-DC=: 5.9 "H x 2.6”W x 4.6"D (150mm H x 66mm W x 117mm D)

●

PWR-IE170W-PC-AC=: 5.93 x 3.72 x 5.60 in. (150.6 x 94.5 x 142.2mm)

●

PWR-IE170W-PC-DC=: 5.93 x 4.47 x 5.75 in. (150.6 x 113.5 x 145.8mm)

Weight ● IE-1000-4T1T-LM - 1.10 lb (0.50 kg)

●

IE-1000-6T2T-LM - 1.25 lb (0.57 kg)

●

IE-1000-4P2S-LM - 1.70 lb (0.77 kg)

●

IE-1000-8P2S-LM - 1.85 lb (0.84 kg)

Power supply weight

●

PWR-IE50W-AC=: 1.4 lb (0.65 kg)

●

PWR-IE50W-AC-IEC=: 1.4 lb (0.65 kg)

●

PWR-IE65W-PC-DC=: 2.6 (1.18 Kg)

●

PWR-IE65W-PC-AC=: 2.7 (1.24 Kg)

●

PWR-IE170W-PC-AC=: 3.88 pounds (1.76 kg)

●

PWR-IE170W-PC-DC=: 3.7 pounds (1.67 kg)

Table 3. Product Specifications