Cisco CIVS-IPC-2911, CIVS-IPC-2916, CIVS-IPC-2930, CIVS-IPC-2935 Quick Start Manual

Americas Headquarters

Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: [phone]

800 553-NETS (6387)

Fax: [phone]

Cisco, Cisco Systems, the Cisco logo, and the Cisco Systems logo are registered trademarks or trademarks of Cisco Systems, Inc. and/or its affiliates in the
United States and certain other countries. All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the
word partner does not imply a partnership relationship between Cisco and any other company. (0705R)

© 2011 Cisco Systems, Inc. All rights reserved.

78-19956-01

Cisco IP PTZ Dome Camera Models
CIVS-IPC-2911, CIVS-IPC-2916, CIVS-IPC-2930,
CIVS-IPC-2935

1 Package Contents

2 Compliance and Safety Information

3 Installing the IP Camera

4 System Requirements

5 Accessing the IP Camera for the First Time

6 Where to go from Here

7 Technical Support

QUICK START GUIDE

1 Package Contents

The Cisco Video Surveillance IP camera package includes these items:

• This Quick Start Guide

• Back box

• Dome drive

• Lower dome

2 Compliance and Safety Information

For international agency compliance, safety, and statutory information for the
IP

camera, see Regulatory Compliance and Safety Information for Cisco Video

Surveillance IP Cameras. This document is available at:

http://cisco.com/en/US/products/ps11252/prod_installation_guides_list.html

3 Installing the IP Camera

For installation, mounting, and wiring instructions, see Cisco Video Surveillance IP
PTZ Dome Camera User Guide, Cisco 2900 Series IP Dome. This document is

available at:

http://cisco.com/en/US/products/ps11252/products_user_guide_list.html

4 System Requirements

Accessing the IP camera through a web browser requires you to use a PC that meets
the following requirements:

• Processor—Intel Core 2 Duo microprocessor, 2.6 GHz

• Operating system—Microsoft Windows XP

• Memory—2 GB RAM

• Network interface card—100 megabits or greater

• Monitor—Minimum 1024 x 768 resolution, 16- or 32-bit pixel color resolution

• Web browser—Internet Explorer 8.0 or later

• Media player—QuickTime 7.6.5 for Microsoft Windows XP

In addition, using the IP camera with Cisco Video Surveillance Manager (VSM)
requires VSM version 6.3.1 or later.

5 Accessing the IP Camera for the First Time

The first time that you access the IP camera, the live video page appears. By default,
you are viewing the video as a public user and have access only to the single stream
live view.

To log in to the IP camera, follow these steps:

Procedure

Step 1 Open a web browser.

Step 2 Enter the IP address of the camera in the browser address bar.

Step 3

Click the Login button in the navigation bar.

Step 4 In the dialog box, type your user ID and password.

If you are logging in to the camera as the administrator for the first time, the
default User ID and Password both are admin (all lowercase). For security
purposes, change the password after you log on for the first time

.

Step 5 Click Apply and wait for the IP camera to reboot.

Step 6

Click Log In.

6 Where to go from Here

For detailed information about understanding, installing, configuring, operating,
administering, and troubleshooting the IP camera, see Cisco Video Surveillance IP
PTZ Dome Camera User Guide, Cisco 2900 Series IP Dome. This document is
available at:

http://cisco.com/en/US/products/ps11252/products_user_guide_list.html

7 Technical Support

To request technical assistance, contact the Cisco Technical Assistance Center (TAC)
in one of the following ways:

• Online—http://www.cisco.com/tac/

• E-mail—[e-mail]

• Phone—In North America: 800 553-2447

Outside North America: 408 526-7209