Cisco 253 Series, CIVS-IPC-2530V, CIVS-IPC-2531V Quick Start Manual

Americas Headquarters

Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: [phone]

800 553-NETS (6387)

Fax: [phone]

Cisco, Cisco Systems, the Cisco logo, and the Cisco Systems logo are registered trademarks or trademarks of Cisco Systems, Inc. and/or its affiliates in the
United States and certain other countries. All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the
word partner does not imply a partnership relationship between Cisco and any other company. (0705R)

© 2009 Cisco Systems, Inc. All rights reserved.

Printed in China PRC

DOC-7819148=
78-19148-02

Cisco Video Surveillance 253x Series IP Dome,
Models CIVS-IPC-2530V and CIVS-IPC-2531V

1 Overview

2 Package Contents

3 Optional Accessories

4 About Installing the IP Dome

5 Technical Support

QUICK START GUIDE

1 Overview

The Cisco Video Surveillance 253x Series IP Dome models CIVS-IPC-2530V and
CIVS-IPC-2531V are high-resolution, feature-rich IP cameras. They offer wide
dynamic ranges, dual streaming, motion detection, event notification, day/night
operation, 24 VAC power, flexible mounting options, and many other features. They
also support external devices that trigger alarms and respond to alarms, and provide
audio input and output.

The IP domes are vandal-resistant and include an integrated heater and fan. They are
designed to be mounted outdoors. Model CIVS-IPC-2530V includes a clear dome
cover and model CIVS-IPC-2531V includes a smoked dome cover.

2 Package Contents

The Cisco Video Surveillance IP Dome package includes these items:

• This Quick Start Guide

• Regulatory Compliance and Safety Information

• Template for mounting

• Camera

• Conduit case

• Mini cable with BNC adapter

• Y cable for audio input and output

• 0.9 mm Allen wrench for adjusting back focus

• TORX security screwdriver for tamper resistant TORX head screws

• 8-32 x 5/16 inch screws (qty. 4)

• Rubber sheet

• Spare gasket (qty. 1)

3 Optional Accessories

The following accessories are available for the 253x Series IP Dome. You can order
these accessories from Cisco or a Cisco partner.

• Bubble, clear, 2500 Series—Cisco part number CIVS-IPCA-1004=

• Bubble, smoked, 2500 Series—Cisco part number CIVS-IPCA-1005=

• Conduit base spare with extra gaskets, 2500 Dome series—CIVS-IPCA-1006=

4 About Installing the IP Dome

Installing the IP dome involves mounting it by using a conduit case or a pendant.
Mounting options include the following:

• Conduit case mounting—Use this method with the provided conduit case in

situations where you cannot cut a hole through a surface for cables or where cables
run through a small hole in a surface

• Pendant mounting—You can mount the IP dome 253x series to a wall with an

optional pendant and wall mount assembly

The IP dome requires a connection to a network via a a shielded twisted pair (STP)
category 5 or higher network cable. The IP dome also requires power from a
customer-supplied table-top or rack-mounted 24 VAC power supply. The 24 VAC
source must be isolated from the ground (floating output).

In addition, you can use the following optional devices with the IP dome:

• External speaker

• External microphone

• Up to two external input devices and up to two external output devices

For detailed information about installing, configuring, operating, administering, and
troubleshooting the IP dome, see Cisco Video Surveillance IP Camera User Guide,

Cisco Video Surveillance 253x Series IP Dome, Models CIVS-IPC-2530V and
CIVS-IPC-2531V. This document is available at

www.cisco.com/go/ipcamera.

5 Technical Support

To request technical assistance, contact the Cisco Technical Assistance Center (TAC)
in one of the following ways:

• Online—http://www.cisco.com/tac/

• E-mail—[e-mail]

• Phone—In North America: 800 553-2447

Outside North America: 408 526-7209