Cisco Catalyst 4503, Catalyst 4503-E, Catalyst 4506, Catalyst 4506-E, Catalyst 4507R-E Description
...
Cisco Catalyst 4500 for the Enterprise
At-A-Glance
Supervisor Engines Feature Description When to Buy
Entry-Level, Layer 2:
Catalyst 4500
Supervisor II-Plus
• Scalable to 64 Gbps, 48 Mpps forwarding
• Redundant capable 2xGE uplinks
• 266 MHz CPU
• Active VLAN Support (up to 2k)
• Baseline security and QoS features:
- IP Securit y filtering: 16k entries
- Per port /VLAN Rate-limiting: 512 policies
• Basic features at entry level price point; for smaller scale Layer 2 wiring closets
• Simple Layer 3 Routing (RIP, static routes)
• No NetFlow support
• For Catalyst 4503, 4506, 4507R chassis
• For the Catalyst 4503, use the Supervisor II-Plus-TS for increase GE ports (116 ports)
High-End, Layer 2:
Catalyst 4500
Supervisor II-Plus-10GE
• Scalable to 108 Gbps, 81 Mpps forwarding
• Redundant capable 2x10GE and 4x1GE uplinks
• 667 MHz CPU
• Same Supervisor II-Plus features, but more:
- Active VL AN Support (up to 4k)
- Multicast and Broadcast Suppression
• Optimized for the LAN access in a medium-sized enterprise
• Need for 10Gig bandwidth in a L2 network
Entry-Level Layer 3:
Catalyst 4500
Supervisor IV
• Scalable to 64 Gbps, 48 Mpps forwarding
• Redundant capable 2xGE uplinks
• 333 MHz CPU
• Active VLAN Support (up to 4k)
• Enhanced security and QoS Features:
- IP Security filtering: 32k entries
- Per port/VLAN Rate-limiting: 1024 policies
- NetFlow support for traffic monitoring
• Medium wiring closets and L3 networks
• Designed with extra headroom for future QoS and Security features
• Enhanced L3 Routing: OSPF, IS-IS, BGP
• For Catalyst 4503, 4506, and 4507R chassis
• For Catalyst 4510R support, the Supervisor V (non-10GE) is an alternative option
High-End Layer 3:
Catalyst 4500
Supervisor V-10GE
• Scalable to 136 Gbps, 102 Mpps forwarding
• Redundant capable 2x10GE and 4x1GE uplinks
• 833 MHz CPU
• Active VLAN Support (up to 4k)
• Advanced security and QoS Features:
- IP Security filtering: 32k entries
- Per port/VLAN Rate-limiting: 8000 policies
- Advanced NetFlow support
• Most efficient processing of QoS and Security ser vices with increased scalability
• Support for greater than 244 ports
• Users interested in NetFlow for virus-detection and Per User Rate Limiting
• Faster L2/L3 control plane processing and convergence
• More granular L2/L3 data capture
• Required for Catalyst 4510R
• Single Supervisor
• 116 Ethernet ports
• 7 RU
Cisco
®
Catalyst 4503
Performance and Port Density
Price
Cisco Catalyst 4506
Cisco Catalyst 4507R
Cisco Catalyst 4510R
• Single Supervisor
• 244 Ethernet ports
• 10 RU
• 108 Gbps
• Reliability Option:
Redundant Supervisor
• 244 Ethernet ports
• 11 RU
• Reliability Option:
Redundant Supervisor
• 388 Ethernet ports
Cisco Catalyst 4500 for the Enterprise
At-A-Glance
© 1992-2005 Cisco Systems, Inc. All rights reserved. Important Notices, Privacy Statement, and
Trademarks of Cisco Systems, Inc. 205389.BY_ETMG_CC_10.05
96-Port 10/100 Data Only 144-Port 10/100 Data Only High Density 10/100 244-388 Port Data Only 96-Port 10/100/1000 Data Only 144-Port 10/100/1000 Data Only
S
ingle
S
upervisor
E
ngine
•
WS-C4503
•
2xWS-X4148-RJ
• 2xPWR-C45-1000AC
• WS-X4013+-TS
•
WS-C4506
•
3xWS-X4148-RJ
• 2xPWR-C45-1000AC
• WS-X4515
•
WS-C4510R
•
5-7xWS-X4148-RJ
• 2xPWR-C45-1400AC
• WS-X4516-10GE
•
WS-C4503
•
2xWS-X4548-GB-RJ45
• 2xPWR-C45-1000AC
• WS-X4013+-TS
•
WS-C4506
•
3xWS-X4548-GB-RJ45
• 2xPWR-C45-1000AC
• WS-X4515-10GE
Redundant
Supervisor
Engines
• WS-C4507R
• 2xWS-X4148-RJ
• 2xPWR-C45-1000AC
• 2xWS-X4013+
• WS-C4507R
• 3xWS-X4148-RJ
• 2xPWR-C45-1000AC
• 2xWS-X4515
• WS-C4510R
• 5-7xWS-X4148-RJ
• 2xPWR-C45-1400AC
• 2xWS-X4516-10GE
• WS-C4507R
• 2xWS-X4548-GB -RJ45
• 2xPWR-C45-1000AC
• 2xWS-X4013+
• WS-C4507R
• 3xWS-X4548-GB -RJ45
• 2xPWR-C45-1000AC
• 2xWS-X4515-10GE
Benefits Resiliency and longevity
for a small premium over
a high-end stackable.
Use WS-X4013+10GE when
additional bandwidth is
required in a L2 network.
Simplicity: All 388 ports receive feature
consistency using the Supervisor Engine.
Use WS-X4516-10GE for additional
port and feature scalability.
• Future-proof your network by with a 10/100/100
auto-negotiating line card.
• Use WS-X4516 when 10 Gig is not required.
Power Over Ethernet (PoE) Components
Use the below table to determine how many powered Devices (PD) the power supplies can support.
802.3af Class-2 Devices (7 Watts) 802.3af Class 0 and 3 Devices (15.4 Watts)
1300 Watt AC (PWR-C45-1300ACV)
Requires a 15A Circuit at Minimum
102 46
2800 Watt AC (PWR-C45-2800ACV)
Requires a 20A Circuit at Minimum
178 80
4200 Watt AC (PWR-C45-4200ACV)
Requires 15A Circuit at Minimum
• 384 PDs @ 200V
• 241 PDs @ 100V
• 222 PDs @ 200V
• 109 PDs @ 100V
Catalyst 4500 802.3af Linecards Description
WS-X4548-GB-RJ45V Catalyst 4500 PoE 802.3af 10/100/1000, 48-Ports (RJ45)
WS-X4524-GB-RJ45V Catalyst 4500 PoE 802.3af 10/100/1000 24-Ports (RJ45)
WS-X4506-
GB
-T
Catalyst 4500 6
-P
ort 10/100/1000 PoE or SFP (optional)
WS-X4248-RJ45V or WS-X4248-RJ21V Catalyst 4500 PoE 802.3af 10/100, 48-Ports (RJ-45 or RJ-21)
W
S-X4224-RJ45V
C
atalyst 4500 10/100 PoE 802.3af 24-Ports (RJ45)
Loading...