Cinelli Esperia CG-1S Specification

CG1S

CINELLI

ESPERIA

CORPORATION

®

Manufacturers of

Quality Bakery Machinery

Since 1972.

Our Goal is Simple...

To Help You Reach Yours

G. CINELLI-ESPERIA CORPORATION®, the standard by which all will be judged

MINI-ROTOR SINGLE
RACK OVEN

CG/1S

Utilizing the same revolutionary heat
chamber which was designed,
engineered, and made on our premises
for our larger Rotary Rack Ovens, the Mini
Rotor is a stellar performer with regard to
efficiency and recovery time. A heat
exchanger designed within a heat
chamber enables this efficient Oven to
reduce baking time significantly. The
benefit of the efficient heat chamber
allows for rapid warm-up, quick recovery
time, accurate and rapid temperature
variation. These advantages coupled with
high density insulation and a constantly
re-circulating air system, give rise to
noticeable reductions in operating costs
when compared to similar ovens.

As with all our equipment, only the finest
of materials are used. The interior baking
chamber is constructed of Stainless Steel.
The resistant properties of this material
are beneficial where corrosion resistance
and heat retention is concerned. The
exterior finish and exhaust hood are also
made of Stainless Steel. One look at the
Mini Rotor, and you will immediately
notice the quality it exudes. Not only is it
aesthetically clean and pleasing, but it is
also robust in nature.

The CG/1S Mini Rotor has a single rack
capacity, a favorite among, but not limited
to, bagel producers as well as pastry
concessionaires who demand high output
with limited available space. With it’s small
dimensions and pleasing styling, it is
ideally suited for baking operations which
showcase their baking operations to their
clients.

As with all our Rack Oven models, you
may bake a wide variety of Breads, Buns,
Bagels, Pastries, and foods. All Mini Rotor
Rack Ovens come standard with Steam
Injection Systems and are available in
Electric, Natural Gas, Oil, Diesel or
Propane fired configurations.

®

TECHNICAL DATA

MINI-ROTOR SINGLE RACK OVEN MODEL CG/1S

METRIC IMPERIAL

DIMENSIONS (LxWxH) [cm] 159 x 160 x 210 [in] 62 1/2 x 63 x 82 1/2
INSTALLED POWER (Gas and Electric Version) [kW] 1.31 [hp] 1.75
HEATING ELEMENTS (Electric Version Only) [kW] 36
TOTAL AMPERAGE (Gas Version) 12@120-208/3/60
TOTAL AMPERAGE (Electric Version) 108@208-230/3/60
WEIGHT [kg] 544 approx. [lb] 1,200 approx.
PACKING VOLUME [m3] 5.44 approx. [cu.ft.] 192 approx.

ALL DATA AND LITERATURE NOT BINDING, G. CINELLI - ESPERIA CORPORATION® RESERVES THE RIGHT TO EFFECT MODIFICATIONS PRIOR TO NOTIFICATION.

CINELLI

ESPERIA

CORPORATION

380 Chrislea Road,

Woodbridge, Ontario

L4L 8A8 Canada

Tel: [phone]

Fax: [phone]

Printed in Canada

® DESIGNATED TRADEMARK REGISTERED IN

CANADA, USA & MEXICO.

OWNED BY G. CINELLI - ESPERIA CORPORATION.