
Information is current as of September 1, 2009
Note: Information shown is based on data available at time of publication (September 1, 2009).
Specifications are valid for Europe and may vary in other international markets. Vehicle model availability
may change per individual markets.
Chrysler 300C SRT8®
SPECIFICATIONS
Dimensions are in millimeters (inches) unless otherwise noted.
Magna Steyer, Graz, Austria
ENGINE: 6.1-LITER HEMI® V-8
90-degree V-type, liquid-cooled
6063 cu. cm (370 cu. in.)
103.0 x 90.9 (4.06 x 3.58)
Pushrod-operated overhead valves, 16 valves,
16 conventional hydraulic lifters, all with roller followers
Sequential, multi-port, electronic, returnless
Deep-skirt cast-iron block with cross-bolted main bearing caps,
aluminum alloy heads with hemispherical combustion chambers
317 kW (431 hp DIN) @ 6000 rpm (70.6 hp DIN/L)
569 N•m (420 lb.-ft.) @ 4600 rpm
6200 rpm (electronically limited)
Close-coupled 3-way catalyst with closed loop fuel control

Information is current as of September 1, 2009
TRANSMISSION: FIVE-SPEED AUTOMATIC WITH AUTO STICK (W5A580)
Adaptive electronic control, performance-tuned Auto Stick driverinteractive manual control and electronically modulated torque
converter clutch
DIMENSIONS AND CAPACITIES
(d)
Frontal Area, sq. m (sq. ft.)
Fuel Tank Capacity, L (gal.)
1915 – 1955 (4222 – 4310)
Gross Vehicle Weight, kg (lbs.)
Maximum Trailer Mass (braked),
kg (lbs.)
Maximum Trailer Mass (unbraked),
kg (lbs.)
Maximum Tongue Load, kg (lbs.)
(d) All dimensions measured at curb weight with standard tires.
Driver—270 (10.6), passenger—220 (8.66)
Driver—70º, passenger—69º