Christie Digital Systems Matrix 3500 User Manual

Christie’s Matrix Series – Synonymous with Simulation
Christie’s new Matrix Series simulation solutions are purpose-built projectors designed to meet the specific requirements of the simulation market. As technologies change and the demands of the simulation and training markets increase, the need for lower cost simulation systems with higher resolution and higher brightness is prevalent.
The Matrix 3500 is a purpose-built 3-chip 1.8" LCD UXGA high performance, high brightness simulation projector. The brightest in the series, the Matrix 3500 projects 3500 ANSI lumens for bright, vibrant images in daytime simulation environments and full ambient light. Images on-screen are displayed in 1600x1200 UXGA resolution for phenomenally crisp, detailed realistic graphics. The Super CR™ 1000:1 full field contrast ratio ensures the accurate reproduction of night-mode simulation.
The Matrix 3500 also features broad source compatibility and connects to virtually every computer or video source. With Minimum Processing Latency (MPL™), less than one frame delay enables extremely fast simulator response time to user’s commands providing sharp, vibrant images without loss of detail, flicker or motion artifacts.
The Matrix 3500 is quick to set up with an intuitive GUI and virtual plug and play operation with a universal power supply that auto adjusts. Christie’s Digital Color Management (DCM™) system offers a specially designed optical system with very tight tolerance for primary colors and together with the Custom Gamma Adjustment (CGA™) ensures the true color representation, color matching and uniformity across multi-screen images in simulation applications.
The Matrix 3500 features Color Select Filter (CSF™) to ensure all three colors are identically polarized. Two stacked Matrix 3500 units can be used either with linear or circular polarization kits for passive stereo applications.
Featuring four 100W UHP™ lamps with 8000 hours of typical lamp life (16000 hours in dual lamp mode and sequential lamp operation) the Matrix 3500 provides reliability, failsafe operation and a lower power consumption for lower cost of ownership. The ruggedized design withstands 3G vibrations in all three axes making Christie’s Matrix 3500 the reality in simulation.
APPLICATIONS
3500 ANSI lumens
SuperCR: 1000:1 on/off contrast ratio
True UXGA resolution (1600x1200)
Digital Color Management (DCM) for RGB color matching
across multiple screens
Custom Gamma Adjustment (CGA™)
Minimum Processing Latency (MPL) of less than one frame
Remote diagnostics and control via RS232
ChristieNET networking
Four 100W UHP lamps with 8,000 hrs of rated lamp life
(16,000 hours in dual lamp operation)
Lamp Power Management (LPM) system
Color Select Filter (CSF) ensures that RGB colors are in the
same polarization plane
Designed for linear or circular passive stereo applications in stacked configuration
Wide range of optional fixed and zoom lenses, input modules and accessories
Universal 90 to 260 V AC for world-wide operation
3G operating vibration specification in all three axes
Aircraft, ship’s bridge and
land vehicle simulators
Driver training
Air Traffic Control simulators
Design simulators
Architecture, engineering
and construction
Research and development
Military training
Entertainment
Matrix
3500
Brightness
3500 ANSI lumens (1750 ANSI lumens
in dual lamp mode)
Contrast Ratio
Super CR: 1000:1 Full Field
Resolution
Three 1.8" p-Si AM TFT High Aperture
LCD panels
True UXGA 1600 x 1200 chip
resolution
8-bit digital color processing
16.7 million displayable colors
Purpose-built Simulation Features
Digital Color Management (DCM™)
for RGB color matching across multiple screens through individual RGB color adjustments and tight primary color tolerance
Custom Gamma Adjustment (CGA™)
features several gamma curves and gray scale tracking control
Minimum Processing Latency (MPL™)
of less than one frame
Lamp Power Management (LPM™) for
monitoring and control of four lamps (dual or single lamp mode – user selectable)
Rigid design with 3G operating
vibration specification in all three axes
Color temperature adjustment range
from 3200K to 9300K
Color Select Filter (CSF™) enables the
use of the Matrix 3500 units for passive stereo
Linear and circular polarization kits
Source Compatibility and Digital Image Processing
Compatibility with VGA, SVGA, XGA,
SXGA, SXGA+ and UXGA
Resizing processing for computers and
workstations from VGA (640 x 480) up to UXGA (1600 x 1200) resolution
Accepts composite video, S-video
(Y/C), component video (YUV) and HDTV (YPbPr)
Auto detects NTSC, NTSC 4.43, PAL,
PAL M, PAL N, SECAM
Separate, composite sync and sync-on-
green compatible
HDTV Tri-level sync compatible for
various HDTV formats (1080i, 720p, 576i/p, 480i/p)
User selectable aspect ratios 4:3 and
16:9
Digital keystone +/-40°
Input Horizontal Frequency
15kHz to 120kHz
Input Vertical Frequency
50 Hz to 120 Hz
Dot Clock
230 MHz
Field Interchangeable Optional Lenses
Flexibility of installations at various
distances from the screen
Optional fixed and zoom lenses from
0.8:1 to 7:1
Screen size 40" to 600" (1m – 15.2m)
(lens dependent)
Rigid lens mount design
Lens mount with power offset
(left/right and up/down), focus and zoom adjustment
Easy and fast lens replacement
Inputs
Input 1: DVI Input module for
connections to digital computer sources with audio and control port
Input 2: 5 BNC Input module for
connections to analog computer, component and HDTV sources (R,G,B,H,V and Y, Pb/Cb, Pr/Cr) with audio and control port (Compatible with DTV/HDTV formats 480 30i/p, 720p, 720 60p, 1035 30i, 1080 25i, 1080 30i and 1035)
Input 3: Video Decoder module
accepts composite video and S-video from VCR, DVD, Laser Disc players and video cameras and automatically detects PAL, PAL M, PAL N, NTSC, NTSC 4.43 and SECAM video standards
Input 4: Analog RGB 1 x D-sub 15
connection with audio and control port
Outputs
Two built-in 3W speakers
Audio output (2 x RCA)
Enhanced Feature Set
Intuitive on-screen display (OSD)
menus
Service functions can be password
protected
Multiple language support
Auto set-up feature
Front, rear and ceiling mount
installation options
Volume control and mute
Picture freeze and No show mode
functions
Digital zoom function (x1/4 to x49)
Presentation timer
Control/Networking
IR Remote multi-function keypad with
direct key controls, mouse and laser pointer
Wired and built-in keypads
Front and rear IR receiver
Remote control jack
RS232 in/out communication ports via
9-pin D-sub terminals for full remote control and diagnostics
Built-in diagnostic LED
USB type B port
Optional ChristieNET networking for
remote control, monitoring and diagnostics
Lamp Specification
Four 100W UHP lamps from Philips
8000 hours of rated lamp life
User replaceable lamp
Pre-aligned lamp module
Lamp life warning indicators
Power Requirements
Universal voltage range
(auto-switching) 90-260V AC
Line frequency: 50 - 60 Hz nominal
Power consumption: 600 W typical,
700W maximum
In-rush current rating: 80A maximum
Current rating: 6 A maximum at
100-120 VAC, 3 A maximum at 200-240 VAC
Thermal dissipation: 2400 BTU/hr
maximum
Environmental
Operating Temperature: 5 - 35° C
(41-95° F)
Storage Temperature: -30 - 60° C
(-22-140° F)
Operating Humidity: 20 - 80%
non-condensing
Storage Humidity: 0 - 90%
non-condensing
Acoustic noise level 47 dB achieved
with a proprietary fan control system
Size and Weight
Size (body dimensions, without lens):
30.8" L x 22.8" W x 9.9" H (783mm L x 581mm W x 251mm H)
Weight: 37 kg (81.5 lbs)
Shipping weight in standard
packaging: 51.3 kg (113 lbs) max.
Standard Accessories
Wireless/Wired remote unit with
mouse control and laser pointer (two AA type batteries and wired cable included)
User’s manual
Computer cable (Dsub15-Dsub15)
MAC/ VGA adapter
Mouse control cable (PS/2, Serial and
MAC)
DVI cable
DVI/VGA adapter
Dust cover
AC cord x 2 (UL type and European 2P
plug type)
Optional Accessories
ChristieNET™ Networking
Replacement lamp module
Service manual
Transit case
Optional Short Fixed 0.8:1 Lens
Optional Short Fixed 1.2:1 Lens
Optional Short Zoom 1.3-1.8:1 Lens
Optional Zoom 2.0-2.6:1 Lens
Optional Zoom 2.6-3.5:1 Lens
Optional Semi Long Zoom 3.5-4.6:1
Lens
Optional Long Zoom 4.6-6.0:1 Lens
Optional Long Fixed 7.0:1 Lens
DVI module
5 BNC module
Y/C module
Dsub-15 module
HD-SDI module
SD-SDI module
Polarization Filters Linear Set (left &
right) and Circular Set (left & right)
Regulatory Approvals
Safety: CSA C22.2 No. 950, UL 1950,
EN609050 European Norm Safety of Information Technology Equipment
Complies with relevant worldwide
EMC and safety standards
The product complies with FCC class A
and EN55022 Class A requirements
This product conforms to all relevant
European directives, standards, safety, health and environmental concerns and bares the CE marking
Warranty
Projector warranty: 15 months parts
and labor
Lamp warranty: 120 days
Accessories: One year
Matrix 3500 • Specifications
Copyright 2003 Christie Digital Systems, Inc.. All rights reserved. All brand names and product names are trademarks, registered trademarks or tradenames of their respective holders. Canadian manufacturing facility is ISO 9001 certified.
April 03-NA
WWW.CHRISTIEDIGITAL.COM
Corporate Offices
USA 10550 Camden Drive Cypress, CA 90630 PH: 714-236-8610 FX: 714-503-3385 Toll free: (800) 407-7727 (NA only) sales-us@christiedigital.com
CANADA 809 Wellington Street North Kitchener, Ontario N2G 4Y7 PH: 519-744-8005 FX: 519-749-3136 Toll free: (800) 265-2171 (NA only) sales-canada@christiedigital.com
Branch Offices
UNITED KINGDOM PH: +44 118 977 8000 FX: +44 118 977 8100 sales-europe@christiedigital.com
SINGAPORE PH: +65 6877-8737 FX: +65 6877-8747 sales-singapore@christiedigital.com
FRANCE PH: +33 (0) 1 47 48 28 07 FX: +33 (0) 1 47 48 26 06 Mobile: +33 (0) 6 76 47 43 62 sales-france@christiedigital.com
GERMANY PH: +49 2161 664540 FX: +49 2161 664546 sales-europe@christiedigital.com
CHINA PH: +86 21 6278 7708 FX: +86 21 6278 7707 sales-china@christiedigital.com
MIL5651
Due to constant research, specifications are subject to change without notice.
Also in the Matrix Series
Matrix 1500
Matrix 2500
Loading...