Christie PowerTool, DS+10K-M User Manual
Christie PowerTool
USER’S MANUAL
020-100035-03
Section :
PowerTool 2.1 User Manual 1
020-100035-03 Rev. 1 (12-2010)
Christie PowerTool
USER’S MANUAL
020-100035-03
Section :
PowerTool 2.1 User Manual 1
020-100035-03 Rev. 1 (12-2010)
COPYRIGHT NOTICE
© 2007-2010 Christie Digital Systems USA, Inc. - All rights reserved.
This document contains proprietary information of Christie Digital Systems
USA, Inc., and may not be reproduced, stored in a retrieval system,
transferred to other documents, disclosed to other manufacturers, or used for
manufacturing or for any other purpose, in whole or in part, without prior
written permission of Christie Digital Systems USA, Inc.
Christie Digital Systems USA, Inc., reserves the right to make changes to
specifications at any time without notice. The information furnished in this
publication was believed to be accurate and reliable. Christie Digital
Systems USA, Inc. makes no warranty of any kind with regard to this
material, including, but not limited to, implied warranties of fitness for a
particular purpose. Christie Digital Systems USA, Inc. shall not be liable for
errors contained herein or for incidental or consequential damages in
connection with the performance or use of this material.
GRAPHIC ILLUSTRATIONS
All drawings, including system layout, hardware devices, controls and
indicators, screens, and maintenance drawings are provided to enhance
understanding of the accompanying text. These graphics are representations
only; they are not necessarily drawn to scale and may not represent parts of
your specific machine.
TRADEMARKS
PowerTool and ColorMatcher are trademarks of Christie Digital Systems
USA, Inc. All other trademarks used in this manual are the property of their
respective owners.
SOFTWARE LICENSING AGREEMENT
This Software License Agreement (the “Agreement”) is a legal Agreement
between the end user, either, an individual or business entity (“Licensee”)
and Christie Digital Systems USA, Inc. (“Christie” or “Licensor”) for the
software known commercially as PowerTool 2.1 (“Software”). If Licensee
does not accept the terms of this Agreement, Licensee shall return the
Christie product and the software to the vendor.
LICENSE AND RESTRICTIONS
Ownership of Software: and its third party suppliers retain title and
ownership of all rights, including copyright and all other intellectual
property rights, in and to the Software and accompanying written materials
(the “Documentation”), and all copies thereof, regardless of form or media.
This License is not a sale of any rights in or to the Software or the
Documentation or any copy thereof. Licensee acquires no right whatsoever
to the Software or the Documentation except the right to use the Software
and the Documentation in accordance with the terms of this License.
Third Party Licenses: Licensee acknowledges that the Software may
utilize software and other materials provided by third parties. Such third
parties may enforce the provisions of this License to the extent such third
party software and other materials are used by Licensee. Any limitation of
liabilities in this License also apply to such third party suppliers and the third
party software and other materials provided by them. Such limitation of
liabilities, apply to the Software as a whole and are not cumulative.
Grant of License: The Licensor grants to Licensee, a non exclusive and
non-transferable right to use for personal or internal business purposes, the
executable version of the Software and the Documentation, as long as
Licensee complies with the terms and conditions of this License. Licensor
reserves all rights not expressly granted to Licensee.
Copy Restrictions: Licensee may keep one copy of the Software solely for
backup or archival purposes. Unauthorized copying or distribution of the
Software, including Software which has been modified, merged, or included
with other software or of the Documentation is expressly prohibited unless
agreed to in writing by Christie. Licensee must reproduce and include the
copyright notice on any backup copy of the Software and Documentation.
Licensee may not remove any proprietary rights or copyright notice or
identification which indicates the ownership by Christie of the Software or
the Documentation.
Use Restrictions: Licensee shall not (a) modify, adapt, decompile,
disassemble reverse engineer, or otherwise attempt to derive the source code
for the Software, or create derivative works based on the Software or the
Documentation; (b) assign this License or redistribute, encumber, sell,
PowerTool 2.1 User Manual i
020-100035-03 Rev. 1 (12-2010)
transfer, lease, or grant a sublicense of the Software or the licenses granted
herein or otherwise transfer rights to the Software to any person or entity
except as and when authorized by the Licensor in writing; (c) directly or
indirectly, export or transmit the Software, either alone or bundled with other
software, to any country to which such export or transmission is restricted by
any applicable laws without the appropriate prior written consent of the
applicable government entity or department. Licensee will make reasonable
efforts to prevent any unauthorized use of the Software or Documentation by
third parties and will advise Licensee's employees of the restrictions upon
use restrictions herein.
MAINTENANCE AND SUPPORT
Term of Maintenance and Support: The Licensor shall provide
maintenance and support services related to the Software (“Support
Services” for a period of 90 days from the date of receipt of the Software).
Support Services are governed by the Licensor’s policies and programs
described in materials provided by the Licensor. Any supplemental software
code provided to the Licensee as part of the Support Services shall be
considered part of the Software and subject to the terms and conditions of
this Software License Agreement.
WARRANTY AND LIMITATION OF LIABILITY
Product Warranties: The Licensor warrants that the Software will perform
substantially in accordance with the accompanying written materials for a
period of 90 days from the date of receipt of the Software. This warranty is
void if the Licensee or any third party changes or modifies the Software. The
liability of this Licensor under this section is limited to the correction of any
error or malfunction and shall not include liability for loss of data, loss of
computer time, any direct damages or any indirect or consequential
damages. This warranty only extends to those failures communicated to the
Licensor in writing within 90 days of the receipt of the Christie Digital
product. The Licensor does not warrant that the Software is free from any
minor defects or that it will operate uninterrupted. The Licensor does not
make any other warranties, either express or implied, including, but not
limited to, implied warranties of merchantability, fitness for a particular
purpose, title and non-infringement, with regard to the Software. Some
jurisdictions do not allow limitations or duration of an implied warranty, so
the above limitation may not apply to you.
Licensee’s Remedy: The Licensor’s entire liability and the Licensee’s
exclusive remedy shall be repair or replacement of the Software that does
not meet the Warranty. Any replacement Software will be warranted for the
remainder of the original warranty period or thirty (days), whichever is
longer.
ii PowerTool 2.1 User Manual
020-100035-03 Rev. 1 (12-2010)
Exclusions and Limitation of Liability: In no event shall the Licensor be
liable for any loss of data or profits or special, incidental, indirect or
consequential damages, (including, without limitation, damages for loss of
business profits, business interruption, loss of business information, or any
other pecuniary loss) arising out of or in connection with the use of or
inability to use the Software, even if the Licensor has been advised of the
possibility of such damages. In no event will the Licensor be liable for any
damages caused by the Licensee’s failure to meet Licensee’s responsibilities,
which responsibilities include without limitation, the provision of properly
functioning and compatible hardware, operating systems, or applications
software, or arising out of incomplete or inaccurate information provided to
the Licensor. In any case, the Licensor’s entire liability under this
Agreement shall be limited to CDN$1,000.
TERMINATION AND DEFAULT
Termination: The Licensor may terminate this Agreement if the Licensee
breaches or is in default of any obligation. Should this Agreement be
terminated for any reason, the Licensee agrees to immediately cease using
the Software and to return to the Licensor all copies of the Software. The
Licensee’s obligation under this section shall survive the termination of the
Agreement.
GENERAL
Notices: Unless otherwise set forth in this Agreement, all notices, demands
or other communications to the Licensor hereunder shall be in writing
(including telecopy) and shall be deemed to have been duly given if
delivered during normal business hours by hand, Federal Express, United
Parcel Service or other reputable overnight commercial delivery service, by
telecopy, confirmation of receipt received, or by mail with return receipt
requested, addressed as follows:
Christie Digital Systems USA, Inc.
c/o
Christie Digital Systems Canada Inc.
Legal Department
809 Wellington Street North
Kitchener, Ontario
N2G 4Y7
Severability: If any provision of this Agreement is held to be invalid, such
invalidity shall not affect the other provisions of this Agreement.
Waiver: No waiver by the Licensor of any particular default or omission
committed by the Licensee shall affect or impair the right of the Licensor in
respect of any subsequent default or omission of the same or a different kind.
No delay or failure by the Licensor to exercise any rights in connection with
PowerTool 2.1 User Manual iii
020-100035-03 Rev. 1 (12-2010)
any default or omission committed by the Licensee shall affect or impair the
Licensor’s rights in respect of that particular default or omission or any
subsequent default or omission of the same or different kind. In any event,
time shall continue to be of the essence without the necessity of specific
reinstatement.
Governing Law: This Agreement shall be governed by and interpreted in
accordance with the laws of the Province of Ontario and the federal laws of
Canada applicable therein. The Parties hereby will attorn to the nonexclusive jurisdiction of the Courts of the Province of Ontario.
iv PowerTool 2.1 User Manual
020-100035-03 Rev. 1 (12-2010)
Table of Contents
1 Introduction
1.1 Document Contents .............................................................................. 1-1
1.2 Document Conventions ........................................................................ 1-1
1.3 Related Documents...............................................................................1-1
2 Installation and Setup
2.1 Requirements........................................................................................ 2-1
2.1.1 Recommended System.................................................................2-1
2.1.2 Projector Requirements ............................................................... 2-1
2.1.3 Connection Requirements............................................................ 2-1
Ethernet Connections: ................................................................. 2-1
Wireless Ethernet Connections: .................................................. 2-2
2.2 Software Installation.............................................................................2-3
2.2.1 Install PowerTool Software .........................................................2-3
2.2.2 Uninstall PowerTool....................................................................2-3
Windows XP ............................................................................... 2-3
Windows 7 .................................................................................. 2-3
3 Working with PowerTool
3.1 Starting the PowerTool Software ......................................................... 3-1
3.2 Working With Configuration Files....................................................... 3-2
3.2.1 Open a Configuration File ...........................................................3-2
3.2.2 Save a Configuration File ............................................................ 3-2
3.3 Adding Projectors to the Configuration ...............................................3-2
3.3.1 Search for Projectors.................................................................... 3-3
3.3.2 Add Projectors Manually............................................................. 3-5
3.4 Projector Groups................................................................................... 3-6
3.4.1 Create Groups ..............................................................................3-7
3.4.2 Remove Groups or Projectors...................................................... 3-7
3.4.3 Move Groups or Projectors.......................................................... 3-7
3.4.4 Rename Groups or Projectors...................................................... 3-8
3.5 Controlling Projectors .......................................................................... 3-8
3.5.1 Select a Projector and View Settings ........................................... 3-8
3.5.2 Change Settings ........................................................................... 3-9
3.6 VirtualRemote ...................................................................................... 3-9
4 PowerTool Interface
4.1 PowerTool Menu .................................................................................. 4-1
4.2 PowerTool Ribbon................................................................................ 4-2
4.3 Projector Workspace ............................................................................ 4-4
4.4 Projector Control Tabs .........................................................................4-4
PowerTool 2.1 User Manual v
020-100035-03 Rev. 1 (12-2010)
Table of Contents
4.4.1 Status Tab.....................................................................................4-4
4.4.2 Control Tab ..................................................................................4-6
Information ..................................................................................4-6
Source ..........................................................................................4-6
Lens .............................................................................................4-7
4.4.3 Image Tab ....................................................................................4-7
Auto Levels .................................................................................4-7
Contrast .......................................................................................4-9
4.4.4 Color Tab ...................................................................................4-10
Max Drives/SD Video/HD Video .............................................4-10
Color Temperature ....................................................................4-11
User 1–4 ....................................................................................4-11
4.4.5 Lamp Tab...................................................................................4-12
Lamp Mode ...............................................................................4-12
Lamp History .............................................................................4-13
4.4.6 PIP (Picture-in-Picture) Tab ......................................................4-14
Picture in Picture .......................................................................4-14
Size and Position .......................................................................4-14
Source ........................................................................................4-15
PIP Image ..................................................................................4-15
4.4.7 Color Matcher Tab.....................................................................4-16
5 Backing Up Projector Settings
5.1 Back Up Projector Channels or Preferences.........................................5-1
5.2 Restore Projector Channels or Preferences...........................................5-1
5.3 Projector Preferences ............................................................................5-2
vi PowerTool 2.1 User Manual
020-100035-03 Rev. 1 (12-2010)
1 Introduction
1.1 Document Contents
This User’s Manual includes the following sections:
• Section 1 Introduction:Outlines document contents and conventions.
• Section 2 Installation and Setup: Provides an outline of the
installation requirements.
• Section 3 Working with PowerTool: Describes how to get started and
work with PowerTool.
• Section 4 PowerTool Interface: Outlines the features of the interface
and provides a detailed description of the procedures required to use the
software.
Section 1: Introduction
• Section 5 Backing Up Projector Settings: Outlines how to back up
and restore projector settings.
1.2 Document Conventions
The following text formats can be throughout the User Manual:
• KEYPAD COMMANDS/PC KEYSTROKES E.G., POWER, ENTER,
CHANNEL
• Content Reference e.g., Section 5 - Troubleshooting
• Document Reference e.g., Using 3D in Mirage
• Figure/Table References e.g., Figure 2.1, Table 4.3
• Software Menus/Options e.g., Camera Settings, Screen
Definition
• On screen Messages e.g., No Signal
• OPERATIONAL STATES E.G., POWER, ON, OFF
1.3 Related Documents
All information included in this user manual is also included in the on-line
help.
This manual covers the use of controls in the PowerTool interface. For
information about supported functions for specific projector models, see the
projector user manual.
PowerTool 2.1 User Manual 1-1
020-100035-03 Rev. 1 (12-2010)
Section 2: Installation and Setup
2 Installation and Setup
Christie PowerTool allows you to connect several projectors and manage
their features, such as image, color, lamp, Picture-in-Picture, and system
status.
2.1 Requirements
2.1.1 Recommended System
• PC running an Intel or 100% compatible processor
• Windows XP SP3+ (32-bit only) or Windows 7 (32- and 64-bit)
• 256 MB of free disk space
• 256 MB of RAM (512 MB recommended)
• An available Ethernet connection, either physical or wireless
NOTE: When using a tablet PC, use Windows XP Tablet PC Edition 2005
SP2 or later.
2.1.2 Projector Requirements
• One or more projectors running version 1.2f or later of the firmware
• Each projector must be running version 3.1.2.0 or later of the Xport
firmware
NOTE: To check firmware versions, press MENU on the projector control
pad and select
respectively.
6 STATUS. Check the version of Software and Ethernet SW
2.1.3 Connection Requirements
Ethernet Connections:
• 1 network hub
• 1 Ethernet cable to connect the PC to the network hub
• 1 Ethernet cable per projector
PowerTool 2.1 User Manual 2-1
020-100035-03 Rev. 1 (12-2010)
Section 2: Installation and Setup
192.168.200.1192.168.200.2
192.168.200.3
192.168.200.4
Figure 2-1 Ethernet Connection
Wireless Ethernet Connections:
• 1 wireless network hub
• 1 wireless-enabled PC
• 1 Ethernet cable per projector
2-2 PowerTool 2.1 User Manual
Figure 2-2 Wireless Ethernet Connection
020-100035-03 Rev. 1 (12-2010)
2.2 Software Installation
2.2.1 Install PowerTool Software
1. Insert the PowerTool installation CD to start the installation wizard
application.
2. If the installation wizard does not start automatically, select Start >
Run. In the Run dialog box, type D:\AutoRun.exe, where D: is the
specific CD-ROM/DVD-ROM drive letter.
3. The Christie PowerTool 2.1 Setup window appears.
4. Click Next. Accept defaults and click Next. Click Next. The
installation wizard installs any required third-party software, and then
installs PowerTool.
2.2.2 Uninstall PowerTool
Section 2: Installation and Setup
There are two different methods for uninstalling PowerTool, depending upon
whether you are using Windows XP or Windows 7.
Windows XP
1. Click Start > Settings > Control Panel > Add or Remove
Programs.
2. In the Add or Remove Programs window, select Christie
PowerTool 2.1, and click Remove.
3. When prompted to confirm uninstallation, click Ye s .
Windows 7
1. Click Start > Control Panel > Programs and Features.
2. In the Programs and Features window, select Christie PowerTool
2.1, and click Uninstall.
3. When prompted to confirm uninstallation, click Ye s .
PowerTool 2.1 User Manual 2-3
020-100035-03 Rev. 1 (12-2010)
Loading...