Christie EDR70X-LPR User Manual

EDR70X-LPR POWER PACK (ELECTRIC)

USER GUIDE

Ref: WCOI.024 Date: June 2015 Issue: 4

CONTENTS

Page Description
1 Introduction

Specification
Accessories Available

2 Power Pack Features

3 Operating Instructions

4 Safety

5 Power Pack Parts List

6 Hydraulic Hose Parts List

7 Fault Finding

8 E.C. Declaration of Conformity

1

INTRODUCTION

The EDR70X-LPR power pack is a portable, electrically actuated, double acting, “Xtra” pump with a low
pressure return.

The Christie range of power packs are the toughest on the market, combining effortless power with
supreme performance.

The power pack is supplied complete with one control pendant / cable assembly and two hydraulic hose
assemblies.

The unit is operated using the two button control pendant.

SPECIFICATION
Electrical Supply Options (In): 110v 1PH / 240v 1PH / 415v 3PH

Maximum Hydraulic Pressure (Out): 690 bar (10,000 psi)
Pressure Gauge Units: psi or bar
Flow Stage 1 (Out): 10 litres/minute (0.353 cfm)
Flow Stage 2 (Out): 1 litres/minute (0.0353 cfm)
Oil Reservoir Capacity: 7 Litres (427.17 in3)
Hydraulic Hoses Length: 4m
Total Weight (Excluding Hoses): ~41 Kg (90.39 lb)
Noise: Less than 85 dB(A)
Hydraulic Port Size: 1/4" NPT

ACCESSORIES AVAILABLE

The following accessories are available upon request and
can be custom made to suit requirements. Please contact W.
Christie (Industrial) Limited for more information:-

 Extra Length hoses
 Protective storage case
 Portable trolley

2

POWER PACK FEATURES

Control Pendant

Pressure Adjuster
(Relief Valve)

Oil Tank
(Reservoir)

Oil Level

Gauge

Male Coupling

Female

Coupling

Hydraulic

Pressure

Gauge

Motor

Control Panel

Mains Cable