Chord KB-Series, 173.450UK, 173.451UK, KB-80, KB-40 User Manual

KB-Series

Keyboard Amplifiers

Item ref: 173.450UK, 173.451UK

User Manual

173.450UK, 173.451UK User Manual

Introduction

Thank you for choosing this KB-series keyboard amplifier.
These amplifiers are designed for use with up to 3 keyboards and deliver a high quality full
range output to the listener.
Channel 1 can act as a microphone input, turning this unit into a versatile compact P.A.

Warning

To prevent the risk of fire or electric shock, do not expose this appliance to rain or moisture.
To prevent electric shock do not remove the cover.
No user serviceable parts inside. Refer servicing to qualified service personnel.

Safety

Prior to connecting mains, ensure that the supply voltage is correct and the mains lead is in
good condition.
Avoid ingress of water or particles into the enclosure.
If the mains fuse blows, refer the unit to qualified service personnel

Placement

Keep the unit out of direct sunlight and away from heat sources.
Place the unit in an upright position during use and storage.
Keep the unit away from moisture or dusty environments.

Cleaning

Use a soft cloth with a neutral detergent to clean the cabinet, panel and controls. To avoid
damage, do not use solvents to clean
this equipment.

Specifications

KB-80

KB-40

Power supply

220-240Vac 50Hz (IEC)

Inputs

1 x Mic or stereo line, 2 x stereo line

AUX input

L+R RCA

N/A

EQ controls

Bass, Middle, Treble

Bass, Treble

Outputs

L+R line output, Headphones out

Power: RMS

80W

40W

Speaker drivers

300mm + 75mm tweeter

200mm + 65mm tweeter

Dimensions

470 x 525 x 340 mm

395 x 395 x 300mm

Weight

23.0kg

12.0kg