CHINO AL4000 Specifications

Page 1



AL4000 SERIES

100mm chart MULTI-POINT TYPE

HYBRID MEMORY RECORDER

AL4000 series is a hybrid recorder which employs bright and clear, easy to view LCD display. Measuring value display is prepared as 1 point display, multi-points simultaneous display and digital display + bar graph display. Various measuring and recording settings can be easily done by front key switch and confirmed by LCD digital display.

■FEATURES

●Corresponds to SD card

Equipped with SD card (sold separately) and it can record data, read and write setting value.

●Full multi range

Equipped with DC voltage 10 kinds, T/C 36 kinds, RTD 12 kinds, in total 58 kinds. Easily set the range per channels.

●Easy data management by communication interface

Provided with USB port and connect with PC directly. RS232C, RS422A, RS485 and Ethernet communication interface is optionally prepared. When Ethernet is selected, settings from the web and E-mail alarm notification are added.

●Package Software attached.

By Data acquisition software, the use of application expands from recording/management to information processing. *Optional communication interface required. Data analysis software can replay display, wave process, editing and trend display. Parameter setting software can manage the setting information on PC.

●Standard alarm display/ Printing function

Set 4 types of alarm per each input points. When alarm occurs, status display “ALM” flashes and measuring value flashes at LCD operation screen.

●Chart end detection function available

Can set the alarm operation when chart end is detected.

●Various programming function

Process the measured data by programming setting and displayed/recorded data of each channels are shown as programmed result data.



■MODELS

AL47□□-□□□-NNN

Input point

06 : 6 points

Communication interface (option)

N:None E:Ethernet R:RS232C A:RS422A/RS485 Q:RS232C+RS485 C:RS422A/RS485+RS485 G:Ethernet + RS422A/RS485

+RS485

Alarm output / remote contacts (option)

0:None 2:Mechanical relay 2 points

(‘a’ contact)

4:Mechanical relay 4 points

(‘c’ contact) + remote contact 5 points

A:Mechanical relay 6 points

(‘a’ contact) + remote contact 5 points

Power supply

A:100-240V AC

PSE-367

Page 2

AL4000 SERIES

■NAME

1 Display

2 Operation/ Setting Key

3 SD card slot 4 Engineering port

1. Graphic LCD display

Display measured data by digital display and analog indication by bar graph display.

●1 point display ●1 point display + bar graph display

●6 points simultaneous display

2. Front key switch

Setting contents can be easily registered by front key switch.

Press Menu key and menu screen (list of setting items) will be displayed to graphic LCD.

(USB communication connector)

3. SD card slot

Save measured data to SD card by designated interval (Fastest 6 points: 1sec). Also, register measuring / recording condition such as range, scale, chart speed and when required, setup the unit by registered conditions.

5. White LED chart illumination

Set ON/OFF/AUTO (OFF after no operation for 3 minutes).

4. Prepare engineering port at the front

Connect with PC by mini-USB cable*. By attached setting software, you can set or change the parameter by PC. *Purchase commercialized product separately.

Page 3

■RECORDING EXAMPLE

●Periodic data printing

Record the data over trace printing by arbitary interval.

Time Digital recording Trace printing

●List printing

Print setting data such as range, scale, etc. for each channel.

Chart speed

Range

Scale, tag, burnout

●Data print

When the latest data is required, trace printing will stop and record.

Tr ace printingDigital recordingTime

●Alarm printing

When alarm activates/reset, prints time, channel no., alarm type and alarm no.

Alarm reset time

Alarm

Alarm reset channel number

Level

Alarm activation time

Level

Alarm type

Alarm activation CH No.

Page 4

AL4000 SERIES

■INPUT SPECIFICATIONS

Measuring points: 6 Input types: DC voltage --- ±13.8mV, ±27.6mV, ±69.0mV,

DC current --- Max 50mA by external shunt

Thermocouple ---

Resistance thermometer ---

Accuracy ratings: Refer to the table of measuring

Measuring interval:1 second / 6 points Input resolution: About 1/40,000 or better (converted to

Reference junction compensation accuracy:

Burnout: Burnout detection function for thermocouple

Maximum common mode voltage:

Common mode rejection ratio:

Normal mode rejection ratio:

Te r minal board: Removable when wiring.

range/accuracy ratings/display resolution

reference range)

At ambient temperature:23℃±10℃ K, E, J, T, N Platinel

Other than above ---

input and RTD input. Upper burnout, lower burnout or burnout disabled is selectable for each input.

30V AC/60V DC

130dB or more (50/60Hz)

50dB or more (50/60Hz)

±200mV, ±500mV, ±1V ±5V, ±10V, ±20V, ±50V

resistor (100Ω, 250Ω) (sold separately)

K, E, J, T, R, S, B, N, U, L, W-WRe26, WRe5-WRe26, PtRh40-PtRh20, NiMo-Ni, CR-AuFe, Platinel , Au/Pt

Pt100, old Pt100, JPt100, Pt50, Pt-Co

--±0.5℃ or EMF 20µV, whichever greater

±1.0℃ or EMF 40µV, whichever greater

■DISPLAY SPECIFICATIONS

Analog display: LCD bar graph 100mm Digital display: Monographic type LCD

Dots: 240 x 48 dots Display area: 106 x 16mm Display item: All channels simultaneous display,

Status display: REC, CARD, ALM

(Backlight AUTO / Always ON settable)

year/month/day, hour/minute, alarm activate channel, chart speed display of measuring value.

■ALARM DISPLAY

Alarm display: Status display “ALM” flash, measuring value

Alarm types: Absolute alarm, differential alarm, rate-of-

Alarm settings: Individual settings, Max 4 levels/channel Alarm output: Mechanical relay 2 or 6 points (‘a’ contact)

flash at operation screen

change alarm, FAIL, calendar timer, chart end.

Mechanical relay 4 points (‘c’ contact)

■STANDARDS (CONFORMITY PENDING)

CE marking: EN61326-1

UL: UL61010-1 2nd edition CSA (C-UL): CAN/CSA C22.2 No.61010-1-04 Protection: IEC 60529 IP54

EN61010-1 *Under EMC test condition, variation in

indication value is ±20% or ±2mV at maximum,

whichever is larger.

■RECORDING SPECIFICATIONS

Dotting interval: 5 seconds/point, 2.5 seconds/point

Recording method:Wire-dot type 6-color ribbon Record/Printed color:



Chart paper: Fan-fold type

Chart speed: 1 to 1500mm / h, in 1mm/h increments

Periodic data printing:

Data printing: When required, interrupt trace printing and

Alarm printing: Alarm activated --- Time, channel no., alarm

List printing: When required, interrupt trace printing and print

Message printing: Print when required

ON/OFF of display and recording:

Subtract printing: Record difference between reference channel

Zone printing: 2 divisions Compressed/Expanded printing:

Automatic range shift printing:

Skip function: No display or printing of channels of which

Interlock to chart speed

Tr ace printing (default colors)

Channel no.

Color Red Black Blue

Channel no.

Color Green Brown Purple

Digital recording

Periodic data printing

Alarm printing

List printing

Total width 114mm, total length 10m, effective chart width 100mm

(12.5mm / h can be set exceptionally)

Digital printing is added to trace printing at month / day, time, channel no., data, unit Interval (hour/time) arbitrary setting.

digital print time and measuring value.

type and level Alarm reset --- Time, channel no., alarm level Memory capacity --- Max. 48 data

date, chart speed and setting information of each channel.

Up to 15 characters/message, register up to 20 characters.

Select ON / OFF of display per each channel, trace recording to chart, digital recording to chart, recording to SD card

and measuring value or between reference value (set value) and measuring value.

Range limit is made non-linear and specific chart recording lower/upper limit is shrunk or expanded.

Recording range is shifted automatically to another set range when measured value exceeds the current range. Overlap function available.

ranges are not set.

132

45 6

Repetition of red, black, blue, green, brown and purple

Activate: Red, Reset: Green

Black (channel each items color are same as trace printing color)

■CONNECTIVITY

SD card slot

USB port for PC

PLC

Web browser

SD card

Application

RS422A / RS485 *Option

DBKP

FTP server

Ethernet

Page 5

■GENERAL SPECIFICATIONS

Rated power voltage:

Maximum power consumption:

Normal operation condition:



Case material: Door --- Aluminum die-casting

Case color: Door--- Black (equivalent of Munsell N3.0)

Mounting: Panel mounting Weight: About 3.0kg Te r minal screw: Power terminal,

100 to 240VAC, 50/60Hz

Max 40VA 100V AC balanced: 20VA, 240V AC balanced: 27VA

Ambient temperature range: 0 to 50ºC (20 to 65%) Ambient humidity range: 20 to 80%RH (5 to 40ºC) Power voltage:90 to 264V AC Power frequency:50/60Hz ±2% Attitude: forward tilting 0º, backward tilting 0 to 30º, left/right 0 to 10º

Front panel --- Glass Case --- Cold-rolled steel plate

Glass--- Clear and colorless Case --- Gray (equivalent of Munsell N7.0)

Protective conductor terminal --- M4.0 Measuring input terminal, alarm output terminal Remote contact terminal --- M3.5 Communication terminal --- M3.0

■OPTIONS

Remote contact: By external relay contact signal

Alarm output: Mechanical relay (‘a’ contact) 2 points, 6 points

Communication interface: RS232C, RS422A, RS485, Ethernet

(digital contact: short or open), you can select chart speed or data printing Input points: 5 points Input signal: Digital contact signal or open

collector signal Exterior output: 5V DC/2mA Function: 1. Record start/stop

2. Chart speed 3-speed switch

3. Data printing

4. List printing

5. Message printing

6. Operation record (Record ON/OFF condition to the designate location by bar line)

7. Integration/F value reset

8. Memory card (record start/stop)

9. Alarm output rest

10.Time correction

Max. load 100 to 240VAC 0.2A 30V DC 0.2A Min. load 5V DC 10mA

Mechanical relay (‘c’ contact) 4 points

Max. load 100 to 240VAC 0.2A 30V DC 0.2A Min. load 5V DC 10mA

■ACCESSORIES

SD Card

512MB

1GB 2GB

Model : RZ-SMC512 Model : RZ-SMC1G Model : RZ-SMC2G

●

MEASURING RANGES/ACCURACY RATING/DISPLAY RESOLUTION

Input type Measuring range

13.8 to 13.8mV

DC voltage

Thermocouple

W-WRe26

WRe5-WRe26

27.6 to 27.6mV

69.0 to 69.0mV

200 to 200mV

500 to 500mV

1to 1V

5to 5V

10 to 10V

20 to 20V

50 to 50V

200 to 300ºC

200 to 600ºC

200 to 1370ºC

200 to 200ºC

200 to 350ºC

200 to 900ºC

200 to 250ºC

200 to 500ºC

200 to 1200ºC

200 to 250ºC

200 to 400ºC

0to1200ºC 0to1760ºC 0to1300ºC 0to1760ºC 0to1820ºC

200 to 400ºC

200 to 750ºC

200 to 1300ºC

200 to 250ºC

200 to 500ºC

200 to 600ºC

200 to 250ºC

200 to 500ºC

200 to 900ºC

0to2315ºC 0to2315ºC 0to 290ºC

NiMo-Ni

0to 600ºC 0to1310ºC 0to 350ºC

Platinel

0to 650ºC 0to1390ºC

PtRh40-PtRh20

CR-AuFe

Au/Pt

Pt100

Old Pt100

RTD

JPt100

Pt50

Pt-Co

Note: The accuracy ratings are converted into the measuring range under reference condition. Thermocouple input does not contain reference junction compensation accuracy.

K, E, J, T, R, S, B, N : IEC584(1977, 1982), JIS C 1602-1995, JIS C 1605-1995 W-WRe26, NiMo-Ni, Platinel , PtRh40-PtRh20, CR-AuFe, Au/Pt : ASTM E1751 WRe5-WRe26 : ASTM E988 U, L : DIN43710-1985 Pt100 : IEC751(1995), JIS C 1604-1997 Old Pt100 : IEC751(1983), JIS C 1604-1989, JIS C 1606-1989 JPt100 : JIS C 1604-1981, JIS C 1606-1986, Pt50 : JIS C 1604-1981 Pt-Co : CHINO

0to1880ºC 0to 280 K 0to1000ºC

140 to 150ºC

200 to 300ºC

200 to 649ºC

200 to 850ºC

140 to 150ºC

200 to 300ºC

200 to 649ºC

140 to 150ºC

200 to 300ºC

200 to 649ºC

4to 374K

Reference range

±13.8mV ±27.6mV ±69.0mV

±200mV ±500mV

± 1V

± 5V ± 10V ± 20V ± 50V

±13.8mV ±27.6mV ±69.0mV ±13.8mV ±27.6mV ±69.0mV ±13.8mV ±27.6mV ±69.0mV ±13.8mV ±27.6mV ±13.8mV ±27.6mV ±13.8mV ±27.6mV ±13.8mV ±13.8mV ±27.6mV ±69.0mV ±13.8mV ±27.6mV ±69.0mV ±13.8mV ±27.6mV ±69.0mV ±69.0mV ±69.0mV ±13.8mV ±27.6mV ±69.0mV ±13.8mV ±27.6mV ±69.0mV ±13.8mV

±6.9mV

±27.6mV

160Ω 220Ω 340Ω 400Ω 160Ω 220Ω 340Ω 160Ω 220Ω 340Ω 220Ω

220Ω

Accuracy ratings

±0.1% ±1digit

±0.2% ±1digit

±0.1% ±1digit

±0.15%

±1digit

Display

resolution

10µV 10µV

10µV 100µV 100µV

10mV 10mV 10mV 10mV 10mV

0.1ºC

0.1ºC 1 ºC

0.1ºC

0.1ºC 1 ºC

0.1ºC

0.1ºC 1 ºC

0.1ºC

0.1ºC 1 ºC 1 ºC 1 ºC 1 ºC 1 ºC

0.1ºC

0.1ºC 1 ºC

0.1ºC

0.1ºC 1 ºC 1 ºC 1 ºC

0.1ºC

0.1ºC 1 ºC

0.1ºC

0.1ºC 1 ºC 1 ºC

0.1 K

0.1ºC

0.1 K

Page 6

APPLICATION SOFTWARE (standard attached)

Data Acquisition Software

You can acquire data easily to your PC.

*Optional communication interface required

List Data Screen

Trend Data Screen

Data Analysis Software

Open the binary file recorded in the SD card, replay display and edit the trend of acquired data file.

■TERMINAL ARRANGEMENT

●Alarm relay output (6 points ‘a’ contact) + remote contacts and communication interface

Communication terminal

RS232C RS422A

COM1

RS485

COM2

RS485

* RS232C and RS422A/485 are specified on purchase.

12345678

SA SB SG

SG SD RD SG

SDA SDB RDA RDB

SG SA SB SA SB

Measurement input terminals

TC.mV(+), RTD(A) terminals

TC.mV(

), RTD(B) terminals

RTD(B) terminals

Short between 5-7, 6-8

Parameter Setting Software

Control the setting information at PC by using communication interface or USB port (standard equipped)

Alarm output terminals (option)

N.O terminal

COM terminal

Power/protective conductive terminals

Remote contact terminals (option)

●Alarm relay output (4 points ‘c’ contact) + remote contacts and communication interface

Ethernet connector (option)

Communication terminal

COM1

COM2

■DIMENSIONS

144

63 63

RS232C RS422A RS485 RS485

* RS232C and RS422A/485 are specified on purchase.

12345678

SA SB SG

SG SD RD

SDA SDB RDA RDB

SG SG SA SB SA SB

Measurement input terminals

TC.mV(+), RTD(A) terminals

TC.mV(

), RTD(B) terminals

RTD(B) terminals

Short between 5-7, 6-8

Max 216

Alarm output terminals (option) N.O terminal

N.C terminal

Ethernet connector (option)

●Panel cutout

162

137

Power/protective conductive terminals

Remote contact terminals (option)

COM terminal

200

＋1

138

27.2

*Max216, When alarm output/remote contacts unit and communication unit are added

154.4

195

32-8 KUMANO-CHO,ITABASHI-KU,TOKYO 173-8632

Telephone : +81-3-3956-2171 Facsimile : +81-3-3956-0915 E-mail : inter@chino.co.jp Website : www.chino.co.jp/

＋1

138

Unit :mm

Specifications subject to change without notice. Printed in Japan (I) 2011. 12