CHIMEI INNOLUX M220ZGE-L20 Specification
Global LCD Panel Exchange Center
吳柏勳
柯直孝
徐欣怡
MODEL NO.: M220ZGE
www.panelook.com
PRODUCT SPECIFICATION
Doc. Number :
ϭ Tentative Specification
ϭ Preliminary Specification
Ϯ Approval Specification
SUFFIX: L20
Customer:
APPROVED BY SIGNATURE
Name / Title
Note
C3,C4
Please return 1 copy for your confirmation with your
signature and comments.
Approved By Checked By Prepared By
Version 3.4 22 November 2012 1 / 29
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
CONTENTS
1. GENERAL DESCRIPTION ......................................................................................................5
1.1 OVERVIEW .......................................................................................................................5
1.2 GENERAL SPECIFICATI0NS ............................................................................................5
2. MECHANICAL SPECIFICATIONS .......................................................................................... 5
3. ABSOLUTE MAXIMUM RATINGS .......................................................................................... 5
3.1 ABSOLUTE RATINGS OF ENVIRONMENT ...................................................................... 5
3.2 ELECTRICAL ABSOLUTE RATINGS ................................................................................6
3.2.1 TFT LCD MODULE .................................................................................................... 6
3.2.2 BACKLIGHT UNIT...................................................................................................... 6
4. ELECTRICAL SPECIFICATIONS ............................................................................................ 7
4.1 FUNCTION BLOCK DIAGRAM .........................................................................................7
4.2. INTERFACE CONNECTIONS .......................................................................................... 7
4.3 ELECTRICAL CHARACTERISTICS.................................................................................. 9
4.3.1 LCD ELETRONICS SPECIFICATION ........................................................................ 9
4.3.2 Vcc Power Dip Condition...........................................................................................11
4.3.3 BACKLIGHT UNIT.....................................................................................................11
4.3.4 LIGHTBAR Connector Pin Assignment .................................................................... 12
4.4 LVDS INPUT SIGNAL SPECIFICATIONS ....................................................................... 14
4.4.1 LVDS DATA MAPPING TABLE ................................................................................. 14
4.4.2 COLOR DATA INPUT ASSIGNMENT....................................................................... 15
4.5 DISPLAY TIMING SPECIFICATIONS.............................................................................. 16
4.6 POWER ON/OFF SEQUENCE........................................................................................ 18
5. OPTICAL CHARACTERISTICS ............................................................................................19
5.1 TEST CONDITIONS ........................................................................................................ 19
5.2 OPTICAL SPECIFICATIONS ........................................................................................... 19
6. RELIABILITY TEST ITEM .....................................................................................................22
7. PACKING...............................................................................................................................23
7.1 PACKING SPECIFICATIONS .......................................................................................... 23
7.2 PACKING METHOD ........................................................................................................23
7.3 PALLET............................................................................................................................24
8. CMI MODULE LABEL ........................................................................................................... 25
9. PRECAUTIONS .....................................................................................................................26
9.1 ASSEMBLY AND HANDLING PRECAUTIONS ...............................................................26
9.2 STORAGE PRECAUTIONS ............................................................................................26
9.3 OPERATION PRECAUTIONS ......................................................................................... 26
Version 3.4 22 November 2012 2 / 29
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT SPECIFICATION
9.4 SAFETY PRECAUTIONS................................................................................................ 27
9.5 SAFETY STANDARDS.................................................................................................... 27
9.6 OTHER ............................................................................................................................ 27
Appendix. OUTLINE DRAWING............................................................................................... 27
Version 3.4 22 November 2012 3 / 29
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
Version Date Page Description
3.0 JAN, 21,2012 All Spec Ver.3.0 was first issued.
ˆˁ˄
March 16, 2012 P.5,P11 Max total Power computation , Note (2) PBL(Max)=IPIN(Typ) ×VPIN(Max)
Attachment Drawing update ; add dimension
P6 CCCS Value
P9 LVDS common input voltage, Logic Low Input Voltage
P16, P17 Note 4
P19 White variation
www.panelook.com
PRODUCT SPECIFICATION
REVISION HISTORY
P23 Section 7.2 PACKING change
P.8,12 Connector
3.2 SEP 26,2012 P5,P9 Power computation
3.3 OCT 30.2012 P16 V Total
4.5 Display Timing Specification ;LVDS Clock Max Frequency 83,Vertical
3.4 NOV 21.2012 P17
Display Term Max total frame rate 1180
P5, P9 Power computation Add Note 6
Version 3.4 22 November 2012 4 / 29
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
1. GENERAL DESCRIPTION
1.1 OVERVIEW
The M220ZGE-L20 model is a 22 inch wide TFT-LCD slimming module with a WLED light bar Backlight Unit
and a 30-pin 2ch-LVDS interface. This module supports 1680 x 1050 WSXGA
and displays up to 16.7 millions colors. The converter module for the Backlight Unit is not built in.
1.2 GENERAL SPECIFICATI0NS
Item Specification Unit Note
Screen Size 22 inch
Driver Element a-Si TFT active matrix - -
Pixel Number 1680 x R.G.B. x 1050 pixel -
Pixel Pitch 0.282(H) x 0.282(V) mm -
Pixel Arrangement RGB vertical stripe - -
Display Colors 16.7 millions color -
Transmissive Mode Normally White - -
Surface Treatment Hard coating (3H), AG (Haze 25%) - -
Luminance, White 250 (typical) Cd/m2
Color Gamut 72% of NTSC(Typ.) - -
TCO TCO5.0 compliance - -
Power Consumption Total 16.61W (Max.) @ cell 6W (Max.), BL 10.608W (Max.) (1)
www.panelook.com
PRODUCT SPECIFICATION
+
(16:10 wide screen) mode
Note (1) The specified power consumption : Total= cell (reference 4.3.1)+BL (reference 4.3.3)
2. MECHANICAL SPECIFICATIONS
Item Min. Typ. Max. Unit Note
Horizontal (H) 493.2 493.7 494.2 mm
Module Size
Bezel Area
Active Area
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
Vertical (V) 319.6 320.1 320.6 mm
Thickness (T) 10.5 11 11.5 mm
Horizontal 477.4 477.7 478 mm
Vertical 299.8 300.1 300.4 mm
Horizontal - 473.76 - mm
Vertical - 296.1 - mm
Weight - 2100 2250 g
3. ABSOLUTE MAXIMUM RATINGS
3.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item Symbol
Min. Max.
Storage Temperature TST -20 +60 ºC (1)
Operating Ambient Temperature TOP 0 +50 ºC (1), (2)
Value
Unit Note
(1)
Note (1)
(a) 90 %RH Max. (Ta <= 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
Version 3.4 22 November 2012 5 / 29
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
(c) No condensation.
Note (2) The temperature of panel surface should be 0 ºC min. and 60 ºC max.
www.panelook.com
PRODUCT SPECIFICATION
3.2 ELECTRICAL ABSOLUTE RATINGS
3.2.1 TFT LCD MODULE
Item Symbol
Power Supply Voltage VCCS -0.3 6 V
Logic Input Voltage VIN -0.3 3.6 V
Value
Min. Max.
Unit Note
3.2.2 BACKLIGHT UNIT
Item Symbol
LED Forward Current Per
Input Pin
LED Pulse Forward
Current Per Input Pin
Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation
should be restricted to the conditions described under Normal Operating Conditions.
--- 65 69 mA
I
F
--- --- 150 mA
I
P
Min. Typ Max.
Value
Unit Note
(1), (2)
Duty=100%
(1), (2)
Pulse WidthЉ10msec.
and DutyЉ30%
(1)
Note (2) Specified values are for input pin of LED light bar at Ta=25±2 к (Refer to 4.3.3 and 4.3.4 for
further information).
Version 3.4 22 November 2012 6 / 29
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
4. ELECTRICAL SPECIFICATIONS
4.1 FUNCTION BLOCK DIAGRAM
www.panelook.com
PRODUCT SPECIFICATION
4.2. INTERFACE CONNECTIONS
PIN ASSIGNMENT
Pin Name Description
1 RXO0- Negative LVDS differential data input. Channel O0 (odd)
2 RXO0+ Positive LVDS differential data input. Channel O0 (odd)
3 RXO1- Negative LVDS differential data input. Channel O1 (odd)
4 RXO1+ Positive LVDS differential data input. Channel O1 (odd)
5 RXO2- Negative LVDS differential data input. Channel O2 (odd)
6 RXO2+ Positive LVDS differential data input. Channel O2 (odd)
7 GND Ground
8 RXOC- Negative LVDS differential clock input. (odd)
9 RXOC+ Positive LVDS differential clock input. (odd)
10 RXO3- Negative LVDS differential data input. Channel O3(odd)
11 RXO3+ Positive LVDS differential data input. Channel O3 (odd)
12 RXE0- Negative LVDS differential data input. Channel E0 (even)
13 RXE0+ Positive LVDS differential data input. Channel E0 (even)
14 GND Ground
15 RXE1- Negative LVDS differential data input. Channel E1 (even)
16 RXE1+ Positive LVDS differential data input. Channel E1 (even)
17 GND Ground
18 RXE2- Negative LVDS differential data input. Channel E2 (even)
19 RXE2+ Positive LVDS differential data input. Channel E2 (even)
20 RXEC- Negative LVDS differential clock input. (even)
21 RXEC+ Positive LVDS differential clock input. (even)
22 RXE3- Negative LVDS differential data input. Channel E3 (even)
23 RXE3+ Positive LVDS differential data input. Channel E3 (even)
24 GND Ground
25 NC For LCD internal use only, Do not connect
Version 3.4 22 November 2012 7 / 29
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
26 NC For LCD internal use only, Do not connect
27 NC For LCD internal use only, Do not connect
28 Vcc +5.0V power supply
29 Vcc +5.0V power supply
30 Vcc +5.0V power supply
Note (1) Connector Part No.:
Foxconn GS23302-0011R-7H ,GS23301-0321R-7H or equivalent
Note (2) User’s connector Part No:
Mating Wire Cable Connector Part No.: FI-X30H(JAE) or FI-X30HL(JAE)
Mating FFC Cable Connector Part No.: 217007-013001 (P-TWO) or JF05X030-1 (JAE).
Note (3) The first pixel is odd.
Note (4) Input signal of even and odd clock should be the same timing.
www.panelook.com
PRODUCT SPECIFICATION
1,1
(odd)
2,1
3,1
1,2
(even)
2,2
1,3
(odd)
1,4
(even)
1,Xmax
Pitch
Pitch
Ymax,1
Version 3.4 22 November 2012 8 / 29
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Ymax,
Xmax
www.panelook.com
Global LCD Panel Exchange Center
4.3 ELECTRICAL CHARACTERISTICS
4.3.1 LCD ELETRONICS SPECIFICATION
Parameter Symbol
Power Supply Voltage Vcc 4.5 5.0 5.5 V -
Ripple Voltage VRP - -- 300 mV -
Rush Current I
Power Supply Current
Vertical Stripe
Power Consumption PLCD - 4.35 6 Watt (4)(6)
LVDS differential input voltage Vid 100 - 600 mV
LVDS common input voltage Vic 1.0 1.2 1.4 V
Logic High Input Voltage VIH - 0.1 V
Logic Low Input Voltage VIL -0.1 - V
Note (1) The ambient temperature is Ta = 25 ± 2 ºC.
www.panelook.com
PRODUCT SPECIFICATION
Value
Min. Typ. Max.
RUSH
White - 0.36 0.52 A (3)a
Black - 0.87 1.2 A (3)ʳ
-
-
-
- -- 3 A (2)
-
0.4 0.6 A (3)c
Unit Note
Note (2) Measurement Conditions:
Version 3.4 22 November 2012 9 / 29
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...