CHIMEI INNOLUX M215HGG-L10 Specification

Global LCD Panel Exchange Center

MODEL NO.: M215HGG

www.panelook.com

PRODUCT SPECIFICATION

Doc. Number :

Ϯ Tentative Specification
ϭ Preliminary Specification
ϭ Approval Specification

SUFFIX: L10

Customer:

APPROVED BY SIGNATURE

Name / Title

Note

Please return 1 copy for your confirmation with your
signature and comments.

Approved By Checked By Prepared By

Version 0.0 2 November 2010 1 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

PRODUCT SPECIFICATION

CONTENTS

1. GENERAL DESCRIPTION ......................................................................................................5

1.1 OVERVIEW .......................................................................................................................5

1.2 GENERAL SPECIFICATI0NS ............................................................................................5

2. MECHANICAL SPECIFICATIONS .......................................................................................... 5

3. ABSOLUTE MAXIMUM RATINGS .......................................................................................... 5

3.1 ABSOLUTE RATINGS OF ENVIRONMENT...................................................................... 5

3.2 ELECTRICAL ABSOLUTE RATINGS ................................................................................6

3.2.1 TFT LCD MODULE .................................................................................................... 6

3.2.2 BACKLIGHT UNIT...................................................................................................... 6

4. ELECTRICAL SPECIFICATIONS............................................................................................ 7

4.1 FUNCTION BLOCK DIAGRAM .........................................................................................7

4.2. INTERFACE CONNECTIONS .......................................................................................... 7

4.3ELECTRICALCHARACTERISTICS…………......................................................................10

4.3.1 LCD ELETRONICS SPECIFICATION ...................................................................... 10

4.3.2 Vcc Power Dip Condition.......................................................................................... 12

4.3.3 BACKLIGHT UNIT (LED matrix is 14S8P) ............................................................... 12

4.3.4 LIGHTBAR Connector Pin Assignment .................................................................... 12

4.3.5 TOUCH UNIT Pin ELETOONICS SPECIFICATION ................................................. 12

4.4 LVDS INPUT SIGNAL SPECIFICATIONS ....................................................................... 14

4.4.1 LVDS DATA MAPPING TABLE................................................................................. 14

4.4.2 COLOR DATA INPUT ASSIGNMENT....................................................................... 15

4.5 DISPLAY TIMING SPECIFICATIONS.............................................................................. 16

4.6 POWER ON/OFF SEQUENCE........................................................................................ 18

5. OPTICAL CHARACTERISTICS ............................................................................................19

5.1 TEST CONDITIONS ........................................................................................................ 19

5.2 OPTICAL SPECIFICATIONS ........................................................................................... 19

6.

RELIABILITY TEST ITEM .......................................................................................................22

7. PACKING...............................................................................................................................23

7.1 PACKING SPECIFICATIONS .......................................................................................... 23

7.2 PACKING METHOD ........................................................................................................23

7.3 PALLET............................................................................................................................24

8. CMI MODULE LABEL ........................................................................................................... 25

9. PRECAUTIONS .....................................................................................................................26

9.1 ASSEMBLY AND HANDLING PRECAUTIONS ...............................................................26

9.2 STORAGE PRECAUTIONS ............................................................................................26

Version 0.0 2 November 2010 2 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

PRODUCT SPECIFICATION

9.3 OPERATION PRECAUTIONS ......................................................................................... 26

9.4 SAFETY PRECAUTIONS................................................................................................ 27

9.5 SAFETY STANDARDS.................................................................................................... 27

9.6 OTHER ............................................................................................................................ 27

Appendix. OUTLINE DRAWING............................................................................................... 27

Version 0.0 2 November 2010 3 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

PRODUCT SPECIFICATION

REVISION HISTORY

Version Date Page Description

0.0 Nov.2, 2010 All Spec Ver.0.0 was first issued.

Version 0.0 2 November 2010 4 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

1. GENERAL DESCRIPTION

1.1 OVERVIEW

M215HGG-L10 is a 21.5” TFT Liquid Crystal Display touch module which embedded Projected Capacitive

Touch Unit that passed Windows 7 certification. The light source of the module is WLED Backlight unit and

interface is 30 pins 2ch-LVDS . This module supports 1920 x 1080 Full HD mode and can display up to

16.7M colors. The converter module for Backlight is not built in.

1.2 GENERAL SPECIFICATIONS

Item Specification Unit Note

Screen Size 21.53” real diagonal

Driver Element a-si TFT active matrix - -

Pixel Number 1920 x R.G.B. x 1080 pixel -

Pixel Pitch 0.2482 (H) x 0.2482 (V) mm -

Pixel Arrangement RGB vertical stripe - -

Display Colors 16.7M color -

Transmissive Mode Normally white - -

Touch Unit Type Projected Capacitive --

Surface Treatment Glass type, 7H hard - -

Luminance, White 250 Cd/m2

Power Consumption

Note (1) The specified power consumption : Total= cell (reference 4.3.1)+BL (reference 4.3.3) +TP

www.panelook.com

PRODUCT SPECIFICATION

Total 17.46 W (Max.) @ cell 6.3W (Max.), BL 10.66 W (Max.)
,TP 0.5W(Max.)

(1)

(reference 4.3.5)

2. MECHANICAL SPECIFICATIONS

Item Min. Typ. Max. Unit Note

Horizontal (H)

Module Size

TP Active Area

Active Area

Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.

Vertical (V) 315.75 316.0 316.25 mm

Thickness (T) - 14.4 14.9 mm

Horizontal 477.94 478.24 478.54 mm

Vertical 269.41 269.71 270.01 mm

Horizontal 476.64 - mm

Vertical 268.11 - mm

Weight - (2980) (3030) mm

524.3 524.54 524.8

mm

3. ABSOLUTE MAXIMUM RATINGS

3.1 ABSOLUTE RATINGS OF ENVIRONMENT

Item Symbol

Min. Max.

Storage Temperature TST -20 60 ºC (1)

Operating Ambient Temperature TOP 0 50 ºC (1), (2)

Value

Unit Note

(1)

Note (1)

(a) 90 %RH Max. (Ta <= 40 ºC).

Version 0.0 2 November 2010 5 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).

(c) No condensation.

Note (2) The temperature of panel surface should be 0 ºC min. and 60 ºC max.

www.panelook.com

PRODUCT SPECIFICATION

3.2 ELECTRICAL ABSOLUTE RATINGS

3.2.1 TFT LCD MODULE

Item Symbol

Power Supply Voltage VCCS -0.3 6.0 V

Logic Input Voltage VIN -0.3 3.6 V

USB Voltage V

-0.3 5.25 V

USB

Value

Min. Max.

Unit Note

3.2.2 BACKLIGHT UNIT

Item Symbol

LED Forward Current Per

Input Pin

LED Reverse Voltage Per

Input Pin

LED Pulse Forward

Current Per Input Pin

Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation

I

F

V

R

I

P

Min. Typ Max.

0 50 56

--- --- 70

--- --- 160

Value

Unit Note

mA

V

mA

Pulse WidthЉ10msec.

(1), (2)

Duty=100%

(1), (2)

and DutyЉ10%

(1)

should be restricted to the conditions described under Normal Operating Conditions.

Note (2) Specified values are for input pin of LED light bar at Ta=25±2 к (Refer to 4.3.3 and 4.3.4 for

further information).

Version 0.0 2 November 2010 6 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

4. ELECTRICAL SPECIFICATIONS

4.1 FUNCTION BLOCK DIAGRAM

www.panelook.com

PRODUCT SPECIFICATION

4.2. INTERFACE CONNECTIONS

PIN ASSIGNMENT – 30pin LVSD connector

Pin Name Description

1 RXO0- Negative LVDS differential data input. Channel O0 (odd)
2 RXO0+ Positive LVDS differential data input. Channel O0 (odd)
3 RXO1- Negative LVDS differential data input. Channel O1 (odd)
4 RXO1+ Positive LVDS differential data input. Channel O1 (odd)
5 RXO2- Negative LVDS differential data input. Channel O2 (odd)
6 RXO2+ Positive LVDS differential data input. Channel O2 (odd)
7 GND Ground
8 RXOC- Negative LVDS differential clock input. (odd)

9 RXOC+ Positive LVDS differential clock input. (odd)
10 RXO3- Negative LVDS differential data input. Channel O3(odd)
11 RXO3+ Positive LVDS differential data input. Channel O3 (odd)
12 RXE0- Negative LVDS differential data input. Channel E0 (even)
13 RXE0+ Positive LVDS differential data input. Channel E0 (even)

Version 0.0 2 November 2010 7 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

14 GND Ground
15 RXE1- Negative LVDS differential data input. Channel E1 (even)
16 RXE1+ Positive LVDS differential data input. Channel E1 (even)
17 GND Ground
18 RXE2- Negative LVDS differential data input. Channel E2 (even)
19 RXE2+ Positive LVDS differential data input. Channel E2 (even)
20 RXEC- Negative LVDS differential clock input. (even)
21 RXEC+ Positive LVDS differential clock input. (even)
22 RXE3- Negative LVDS differential data input. Channel E3 (even)
23 RXE3+ Positive LVDS differential data input. Channel E3 (even)
24 GND Ground
25 NC For LCD internal use only, Do not connect
26 NC For LCD internal use only, Do not connect
27 NC For LCD internal use only, Do not connect
28 Vcc +5.0V power supply
29 Vcc +5.0V power supply
30 Vcc +5.0V power supply

Note (1) Connector Part No.:

www.panelook.com

PRODUCT SPECIFICATION

093G30-B0001A(STARCONN) or MSAKT2407P30HA(STM) or equivalent

Note (2) User’s connector Part No:

Mating Wire Cable Connector Part No.: FI-X30H(JAE) or FI-X30HL(JAE)

Mating FFC Cable Connector Part No.: 217007-013001 (P-TWO) or JF05X030-1 (JAE).

Note (3) The first pixel is odd.

Note (4) Input signal of even and odd clock should be the same timing.

Version 0.0 2 November 2010 8 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

PRODUCT SPECIFICATION

1,1

(odd)

2,1

3,1

1,2

(even)

2,2

1,3

(odd)

1,4

(even)

1,Xmax

Pitch

Pitch

Ymax,1

PIN ASSIGNMENT– 5pin USB connector

Pin Name Description

1 D- USB signal
2 D+ USB signal
3 GND Ground
4 V
5 Shield GND Shielding Ground

Note (1) Connector Part No.: 3706K-Q05N-00L (Entery) or equivalent

USB Voltage

USB

Ymax,

Xmax

Version 0.0 2 November 2010 9 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

4.3 ELECTRICAL CHARACTERISTICS

4.3.1 LCD ELETRONICS SPECIFICATION

Parameter Symbol

Power Supply Voltage Vcc 4.5 5.0 5.5 V -

Ripple Voltage VRP -- -- 300 mV -

Rush Current I

Power Supply Current

Vertical Stripe

Power Consumption PLCD - 5.3 6.3 Watt (4)

LVDS differential input voltage Vid 100 - 600 mV

LVDS common input voltage Vic 1 1.2 1.4 V

Note (1) The ambient temperature is Ta = 25 ± 2 ºC.

www.panelook.com

PRODUCT SPECIFICATION

Value

Min. Typ. Max.

RUSH

White -- 0.51 0.61 A (3)a
Black -- 1.05 1.26 A (3)b

-

-

-

-- -- 3 A (2)

-- 1.06 1.26 A (3)c

Unit Note

Note (2) Measurement Conditions:

Version 0.0 2 November 2010 10 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Note (3) The specified power supply current is under the conditions at Vcc = 5.0 V, Ta = 25 ± 2 ºC, Fr = 60Hz,

whereas a power dissipation check pattern below is displayed.

www.panelook.com

PRODUCT SPECIFICATION

Note (4) The power consumption is specified at the pattern with the maximum current.

Note (5) VID waveform condition

Version 0.0 2 November 2010 11 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

4.3.2 Vcc Power Dip Condition

www.panelook.com

PRODUCT SPECIFICATION

4.3.3 BACKLIGHT UNIT (LED matrix is 14S8P)

Parameter Symbol

LED Light Bar Input

Voltage Per Input Pin

LED Light Bar Current

Per Input Pin

LED Life Time LLED

Power Consumption PBL

Note (1) LED light bar input voltage and current are measured by utilizing a true RMS multimeter as shown

below:

Note (2) PBL = IPIN × VPIN × ( 4 ) input pins , LED light bar circuit is (14)Series, (8)Parallel.

Note (3) The lifetime of LED is defined as the time when LED packages continue to operate under the

conditions at Ta = 25 ±2 к and I= (25)mA (per chip) until the brightness becomes Љ 50% of its

original value.

Power

Function

Generator

VPIN

IPIN

Min. Typ. Max.

39.2 43.4 47.6

0 50 56

30000

--- 8.68 ---

CMO

Converter

With PWM

Function

Value

V

PIN1, IPIN1

V

PIN, IPIN(4)

Unit Note

(1),

V

mA

Hrs (3)

W

LED Backlight

Module

Series: 14
Parallel: 8

Duty=100%,

IPIN=25mA

(1), (2)

Duty=100%

(1)

Duty=100%,

IPIN=25mA

Version 0.0 2 November 2010 12 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

4.3.4 LIGHTBAR Connector Pin Assignment

Connector: 3707K-Q06N-01L (ENTERY), CI1406M1HRE-NH (CviLux)

CN1

Pin number Description

1 Cathode of LED string
2 Cathode of LED string
3 VLED
4 VLED
5 Cathode of LED string
6 Cathode of LED string

www.panelook.com

PRODUCT SPECIFICATION

LVDS connector

USB connector

Back side of LCD module

Pin number 1

CN1

4.3.5 TOUCH UNIT ELETRONICS SPECIFICATION

Parameter Symbol

Power Supply Voltage VTP 4.75 5 5.25 V

Input Current ITP - 65 100 mA (1)

Power Consumption PTP - 0.325 0.5 W (1)

Report Rate -- - - 75 Hz (2)

Support OS -- Windows 7

Support Points -- Dual Points (2)

Min. Typ. Max.

Value

Unit Note

Version 0.0 2 November 2010 13 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Note(1) Depend on operating mode

Note(2) Dual points on Windows 7

4.4 LVDS INPUT SIGNAL SPECIFICATIONS

4.4.1 LVDS DATA MAPPING TABLE

LVDS Channel O0

LVDS Channel O1

LVDS Channel O2

LVDS Channel O3

LVDS Channel E0

LVDS Channel E1

LVDS Channel E2

LVDS Channel E3

LVDS output D7 D6 D4 D3 D2 D1 D0

Data order OG0 OR5 OR4 OR3 OR2 OR1 OR0

LVDS output D18 D15 D14 D13 D12 D9 D8

Data order OB1 OB0 OG5 OG4 OG3 OG2 OG1

LVDS output D26 D25 D24 D22 D21 D20 D19

Data order DE NA NA OB5 OB4 OB3 OB2

LVDS output D23 D17 D16 D11 D10 D5 D27

Data order NA OB7 OB6 OG7 OG6 OR7 OR6

LVDS output D7 D6 D4 D3 D2 D1 D0

Data order EG0 ER5 ER4 ER3 ER2 ER1 ER0

LVDS output D18 D15 D14 D13 D12 D9 D8

Data order EB1 EB0 EG5 EG4 EG3 EG2 EG1

LVDS output D26 D25 D24 D22 D21 D20 D19

Data order DE NA NA EB5 EB4 EB3 EB2

LVDS output D23 D17 D16 D11 D10 D5 D27

Data order NA EB7 EB6 EG7 EG6 ER7 ER6

www.panelook.com

PRODUCT SPECIFICATION

Version 0.0 2 November 2010 14 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

4.4.2 COLOR DATA INPUT ASSIGNMENT

The brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input for the

color. The higher the binary input, the brighter the color. The table below provides the assignment of color

versus data input.

Color

R7 R6 R5 R4 R3 R2 R1 R0

Black

Red

Green

Basic

Colors

Gray

Scale

Of

Red

Gray

Scale

Of

Green

Gray

Scale

Of

Blue

Note (1) 0: Low Level Voltage, 1: High Level Voltage

Blue

Cyan

Magenta

Yellow

White

Red(0) / Dark

Red(1)
Red(2)

:

:
Red(253)
Red(254)
Red(255)

Green(0) / Dark

Green(1)
Green(2)

:

:

Green(253)
Green(254)
Green(255)

Blue(0) / Dark

Blue(1)
Blue(2)

:

:

Blue(253)
Blue(254)
Blue(255)

0
1
0
0
0
1
1
1
0
0
0

:

:
1
1
1
0
0
0

:

:
0
0
0
0
0
0

:

:
0
0
0

0
1
0
0
0
1
1
1
0
0
0

1
1
1
0
0
0

0
0
0
0
0
0

0
0
0

www.panelook.com

PRODUCT SPECIFICATION

Data Signal

Red Green Blue

G7G6G5G

0

0

0

0

0

0

0

0

1

1

1

1

1

1

0

0

0

0

0

0

0

0

1

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

1

1

1

0

0

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

0

0

1

0

0

0

0

0

0

1

0

0

0

:

:

:

:

:

:

:

:

:

:

:

:

:

1

1

1

1

1

1

1

1

1

0

0

0

0

0

0

0

0

0

:

:

:

:

:

:

:

:

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

:

:

:

:

:

:

:

:

0

0

0

0

0

0

0

0

0

:

1

0

1

1

1

1

0

0

0

0

0

0

:

:

:

:

0

0

0

0

0

0

0

0

0

0

0

0

:

:

:

:

0

0

0

0

0

0

:

1

0

0

0

0

0

1

0

0

0

0

0

0

0

0

0

0

0

:

:

:

:

:

:

0

1

1

0

1

1

0

1

1

0

0

0

0

0

0

0

0

0

:

:

:

:

:

:

0

0

0

0

0

0

0

0

0

G3 G2 G1 G0

4

0

0

0

0

0

0

1

1

1

0

0

0

1

1

1

0

0

0

1

1

1

1

1

1

0

0

0

0

0

0

0

0

0

:

:

:

:
0
0
0
0
0
0

:

:
1
1
1
0
0
0

:

:
0
0
0

:0

:

0

0

0

0

0

0

0

0

0

0

0

:

:

:

:

1

1

1

1

1

1

0

0

0

0

0

0

:

:

:

:

0

0

0

0

0

0

0

0

0

0

1

1

0

0

1

1

0

0

1

1

1

1

0

0

0

0

0

0

:

:

:

:

0

0

0

0

0

0

0

0

0

0

0

1

:

:

:

:

1

0

1

1

1

1

0

0

0

0

0

0

:

:

:

:

0

0

0

0

0

0

B

B6 B5 B4 B3 B2

7

0

0

0

0

0

0

1

0

0

0

1

1

1

1

1

0

1

1

1

0

0

1

1

1

0

0

0

0

0

0

0

0

0

:

:

:
:

0

0

0

0

0

0

0

0

0

0

0

0

1

0

0

0

0

0

:

:

:

:

:

:

1

0

0

0

0

0

1

0

0

0

0

0

0

0

0

0

0

0

:

:

:

:

:

:

0

1

1

0

1

1

0

1

1

0
0
0
1
1
1
0
1
0
0
0

0
0
0
0
0
0

0
0
0
0
0
0

1
1
1

B1B

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

0

0

0

0

0

1

1

1

1

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

:

:

:

:

:

:

:

:

:

:

0

0

0

0

:0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

:

:

:

:

:

:

:

:

:

:

:

:

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

0

0

0

1

0

:

:

:

:

:

:

:

:

:

:

:

:

1

1

1

0

1

1

1

1

1

0

1

1

1

1

1

Version 0.0 2 November 2010 15 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

4.5 DISPLAY TIMING SPECIFICATIONS

The input signal timing specifications are shown as the following table and timing diagram.

Signal Item Symbol Min. Typ. Max. Unit Note

LVDS Clock

Vertical Display Term

Horizontal Display Term

Note: Because this module is operated by DE only mode, Hsync and Vsync input signals are ignored.

www.panelook.com

PRODUCT SPECIFICATION

Frequency Fc 58.54 74.25 97.98 MHz -

Period Tc - 13.47 - ns

Input cycle to

cycle jitter

Input Clock

to data skew

Spread

spectrum

modulation

range

Spread

spectrum

modulation

frequency

Frame Rate Fr 50 60 75 Hz Tv=Tvd+Tvb

Total Tv 1115 1125 113 6 Th -

Active

Display

Blank Tvb Tv-Tvd 45 Tv-Tvd Th -

Total Th 1050 1100 1150 Tc Th=Thd+Thb

Active

Display

Blank Thb Th-Thd 140 Th-Thd Tc -

- - 200 ns (1)

T

rcl

TLVCCS 400 ps (2)

Fclkin_

mod

F

SSM

Tvd 1080 1080 1080 Th -

Thd 960 960 960 Tc -

Fc*98% Fc*102% MHz

200 KHz

(3)

INPUT SIGNAL TIMING DIAGRAM

Version 0.0 2 November 2010 16 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Note (1) The input clock cycle-to-cycle jitter is defined as below figures. Trcl = I T1 – TI

Note (2) Input Clock to data skew is defined as below figures.

www.panelook.com

PRODUCT SPECIFICATION

Note (3) The SSCG (Spread spectrum clock generator) is defined as below figures.

Version 0.0 2 November 2010 17 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

4.6 POWER ON/OFF SEQUENCE

The power sequence specifications are shown as the following table and diagram.

www.panelook.com

PRODUCT SPECIFICATION

Timing Specifications:

Parameters

T1 0.5 - 10 ms
T2 0 - 50 ms
T3 450 - - ms
T4 90 - - ms
T5 0 - 50 ms
T6 5 - 100 ms
T7 500 - - ms

Note (1) The supply voltage of the external system for the module input should be the same as the definition

of Vcc.

Note (2) When the backlight turns on before the LCD operation of the LCD turns off, the display may

momentarily become abnormal screen.

Note (3) In case of VCC = off level, please keep the level of input signals on the low or keep a high

impedance.

Note (4) T4 should be measured after the module has been fully discharged between power off and on

period.

Note (5) Interface signal shall not be kept at high impedance when the power is on.

Min Typ. Max

Valu es

Units

Note (6) CMO wonϗt take any responsibility for the products which are damaged by the customers not

following the Power Sequence.

Note (7) There might be slight electronic noise when LCD is turned off (even backlight unit is also off). To

avoid this symptom, we suggest "Vcc falling timing" to follow "t6 spec".

Version 0.0 2 November 2010 18 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

5. OPTICAL CHARACTERISTICS

5.1 TEST CONDITIONS

Item Symbol Value Unit

Ambient Temperature Ta

Ambient Humidity Ha

Supply Voltage VCC 5 V

Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS"

LED Light Bar Input Current

Per Input Pin

PWM Duty Ratio D 100 %

LED Light Bar Test Converter

5.2 OPTICAL SPECIFICATIONS

The relative measurement methods of optical characteristics are shown in 5.2. The following items should be

www.panelook.com

PRODUCT SPECIFICATION

I

PIN

25±2

50±10

50 ± 1.5

o

C

%RH

mADC

measured under the test conditions described in 5.1 and stable environment shown in Note (5).

Item Symbol Condition Min. Typ. Max. Unit Note

Red

Color

Green

Chromaticity

(CIE 1931)

Blue

White

Center Luminance of White

(Center of Screen)

Contrast Ratio CR

Response Time

White Variation

Viewing Angle

Viewing Angle

Horizontal

Vertical

Horizontal

Vertical

Rx

Ry

Gx
Gy
Bx

By

θ

=0° , θY =0°

x

Typ –

0.03

Wx 0.313

Wy

L

C

200 250

700 1000 - - (2), (5)

TR - 1.5 2.5
T

F

δW

θx- + θx+
θy- + θy+
θx- + θx+
θy- + θy+

θ

=0° , θY =0°

x

θ

=0° , θY =0°

x

USB2000

CR Њ 10

USB2000

CR Њ 5

USB2000

150 170 ­140 160 ­160
150

(0.641)

(0.338)

(0.315)
(0.629)
(0.159)

Typ +

0.03

(0.059)

0.329

- cd/m

- 3.5 5.5

- - 1.33 - (5), (6)

Deg. (1), (5)

178 --­170 ---

Deg. (1), (5)

- (1), (5)

2

(4), (5)

ms (3)

Version 0.0 2 November 2010 19 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Note (1) Definition of Viewing Angle (θx, θy):

www.panelook.com

PRODUCT SPECIFICATION

Note (2) Definition of Contrast Ratio (CR):

The contrast ratio can be calculated by the following expression.

Contrast Ratio (CR) = L255 / L0

L255: Luminance of gray level 255

L 0: Luminance of gray level 0

CR = CR (5)

CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (6).

Note (3) Definition of Response Time (T

R

, TF):

Version 0.0 2 November 2010 20 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Note (4) Definition of Luminance of White (LC):

www.panelook.com

PRODUCT SPECIFICATION

Measure the luminance of gray level 255 at center point

LC = L (5)

L (x) is corresponding to the luminance of the point X at Figure in Note (6).

Note (5) Measurement Setup:

The LCD module should be stabilized at given temperature for 40 minutes to avoid abrupt

temperature change during measuring. In order to stabilize the luminance, the measurement should

be executed after lighting Backlight for 40 minutes in a windless room.

Note (6) Definition of White Variation (δW):

Measure the luminance of gray level 255 at 9 points

δW = Maximum [L (1) ~ L (9)] / Minimum [L (1) ~ L (9)]

Version 0.0 2 November 2010 21 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

6. RELIABILITY TEST ITEM

Items Required Condition Note

Temperature Humidity Bias (THB)

High Temperature Operation

(HTO)

Low Temperature Operation

(LTO)

High Temperature Storage (HTS)

Low Temperature Storage (LTS)

Vibration Test

(Non-operation)

Shock Test

(Non-operation)

Thermal Shock Test (TST)

On/Off Test

ESD (Electro Static Discharge)

Air Discharge: ± 15KV, 150pF(330)

Altitude Test

Note (1) criteria : Normal display image with no obvious non-uniformity and no line defect.

www.panelook.com

PRODUCT SPECIFICATION

Ta= 5 0 к , 80%RH, 240hours

Ta= 5 0 к , 50%RH , 240hours

Ta= 0 к , 240hours

Ta= 6 0 к , 240hours

Ta= - 2 0к , 240hours

Acceleration: 1.5 Grms

Wave: Half-sine

Frequency: 10 - 300 Hz

Sweep: 30 Minutes each Axis (X, Y, Z)

Acceleration: 50 G

Wave: Half-sine

Active Time: 11 ms

Direction : ± X, ± Y, ± Z.(one time for

each Axis)

-20к/30min , 60к / 30min , 100

cycles

25к ,On/10sec , Off /10sec , 30,000

cycles

Contact Discharge: ± 8KV,

150pF(330)

Operation:10,000 ft / 24hours

Non-Operation:30,000 ft / 24hours

Note (2) Evaluation should be tested after storage at room temperature for more than two hour

Note (3) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough so

that the module would not be twisted or bent by the fixture.

Version 0.0 2 November 2010 22 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

7. PACKING

7.1 PACKING SPECIFICATIONS

(1) TBD

(2) TBD

(3) TBD

7.2 PACKING METHOD

(1) Carton Packing should have no failure in the following reliability test items.

Test Item Test Conditions Note

Vibration TBD

Dropping Test TBD

www.panelook.com

PRODUCT SPECIFICATION

TBD

Figure. 7-1 Packing method

Version 0.0 2 November 2010 23 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

7.3 PALLET

Sea / Land Transportation

(40ft HQ Container)

www.panelook.com

PRODUCT SPECIFICATION

Sea / Land Transportation

(40ft Container)

Air Transportation

Figure. 7-2 Packing method

Version 0.0 2 November 2010 24 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

y

8. CMI MODULE LABEL

The barcode nameplate is pasted on each module as illustration, and its definitions are as following

explanation.

www.panelook.com

PRODUCT SPECIFICATION

M215HGG-L10

CML5G10

(a) Model Name: M215HGG-L10

(b) Revision: Rev. XX, for example: A0, A1… B1, B2… or C1, C2…etc.

(c) CMI barcode definition:

Serial ID: XX-XX-X-XX-YMD-L-NNNN

Code Meaning Description

XX CMI internal use -

XX Revision Cover all the change

X CMI internal use -

XX CMI internal use -

Year: 0~9, 2001=1, 2002=2, 2003=3…2010=0, 2011=1, 2012=2…

YMD Year, month, day

Day: 1~31=1, 2, 3, ~, 9, A, B, C, ~, W, X, Y, exclude I, O, and U.

L Product line # Line 1=1, Line 2=2, Line 3=3, …

NNNN Serial number Manufacturing sequence of product

XXXXXLXXLYMDNN

Month: 1~12=1, 2, 3, ~, 9, A, B, C

Fab ID

(d) Customer’s barcode definition:

Serial ID: CM- L5G10-X-X-X-XX-L-XX-L-YMD-NNNN

Code Meaning Description

CM Supplier code CMO=CM

L5G10 Model number M215HGG-L10= L5G10

X Revision code Non ZBD: 1,2,~,8,9 / ZBD: A~Z

X Source driver IC code

X Gate driver IC code

XX Cell location Tainan Taiwan=TN, Ningbo China=CN

L Cell line #

XX Module location

L Module line #

YMD Year, month, day

NNNN Serial number By LCD supplier

Century=1, CLL=2, Demos=3, Epson=4, Fujitsu=5, Himax=6,

Hitachi=7, Hynix=8, LDI=9, Matsushita=A, NEC=B, Novatec=C,

OKI=D, Philips=E, Renasas=F, Samsung=G, Sanyo=H, Sharp=I,

=

Tainan, Taiwan=TN ; Ningbo China=NP

Year: 0~9, 2001=1, 2002=2, 2003=3…2010=0, 2011=1, 2012=2…

Month: 1~12=1, 2, 3, ~, 9, A, B, C

: 1~31=1, 2, 3, ~, 9, A, B, C, ~, T, U, V

Da

=

1,2,~,9,A,B,~,Y,Z

1,2,~,9,A,B,~,Y,Z

=

=

Version 0.0 2 November 2010 25 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

(e) FAB ID(UL Factory ID):

Region Factory ID

TWCMO GEMN

NBCMO LEOO

NBCME CANO

NHCMO CAPG

www.panelook.com

9. PRECAUTIONS

9.1 ASSEMBLY AND HANDLING PRECAUTIONS

(1) Do not apply rough force such as bending or twisting to the module during assembly.

(2) To assemble or install module into user’s system can be only in clean working areas. The dust and oil

may cause electrical short or worsen the polarizer.

PRODUCT SPECIFICATION

(3) It’s not permitted to have pressure or impulse on the module because the LCD panel and Backlight will

be damaged.

(4) Always follow the correct power sequence when LCD module is connecting and operating. This can

prevent damage to the CMOS LSI chips during latch-up.

(5) Do not pull the I/F connector in or out while the module is operating.

(6) Do not disassemble the module.

(7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and

easily scratched.

(8) It is dangerous that moisture come into or contacted the LCD module, because moisture may damage

LCD module when it is operating.

(9) High temperature or humidity may reduce the performance of module. Please store LCD module within

the specified storage conditions.

(10)When ambient temperature is lower than 10ºC may reduce the display quality. For example, the

response time will become slowly.

9.2 STORAGE PRECAUTIONS

(1) Do not leave the module in high temperature, and high humidity for a long time. It is highly recommended

to store the module with temperature from 0к to 35к and relative humidity of less than 70%

(2) Do not store the TFT – LCD module in direct sunlight

(3) The module should be stored in dark place. It is prohibited to apply sunlight or fluorescent light in storing

9.3 OPERATION PRECAUTIONS

(1) The LCD product should be operated under normal condition.

Normal condition is defined as below :

Temperature : 20±15к

Humidity: 65±20%

Display pattern : continually changing pattern(Not stationary)

Version 0.0 2 November 2010 26 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

(2) If the product will be used in extreme conditions such as high temperature,high humidity,high

altitude ,display pattern or operation time etc…It is strongly recommended to contact CMI for application

engineering advice . Otherwise , Its reliability and function may not be guaranteed.

9.4 SAFETY PRECAUTIONS

(1) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In case

of contact with hands, skin or clothes, it has to be washed away thoroughly with soap.

(2) After the module’s end of life, it is not harmful in case of normal operation and storage.

9.5 SAFETY STANDARDS

The LCD module should be certified with safety regulations as follows:

(1) UL60950-1 or updated standard.

(2) IEC60950-1 or updated standard.

www.panelook.com

PRODUCT SPECIFICATION

9.6 OTHER

When fixed patterns are displayed for a long time, remnant image is likely to occur.

Appendix. OUTLINE DRAWING

Version 0.0 2 November 2010 27 / 27

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

www.panelook.com

www.panelook.com

Global LCD Panel Exchange Center

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

www.panelook.com

Global LCD Panel Exchange Center

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!