CHIMEI INNOLUX M215HGE-L21 Specification

Global LCD Panel Exchange Center

MODEL NO.: M215HGE

www.panelook.com

PRODUCT SPECIFICATION

Doc. Number :

ϭ Tentative Specification
ϭ Preliminary Specification

Ϯ Approval Specification

SUFFIX: L21

Customer: Common Model

APPROVED BY SIGNATURE

Name / Title

Note

Product version C1/C2

Please return 1 copy for your confirmation with your

signature and comments.

Approved By Checked By Prepared By

ֆ࢙Ꮜ

ֆ࢙Ꮜ!!!!

ֆ࢙Ꮜֆ࢙Ꮜ

Version 3.3 29 February 2012 1 / 28

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

׵ࣦࡀ

׵ࣦࡀ!!!!

׵ࣦࡀ׵ࣦࡀ

೚։↼

೚։↼!!!!

೚։↼೚։↼

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

PRODUCT SPECIFICATION

CONTENTS

1. GENERAL DESCRIPTION ......................................................................................................5

1.1 OVERVIEW........................................................................................................................5

1.2 GENERAL SPECIFICATIONS ...........................................................................................5

2. MECHANICAL SPECIFICATIONS...........................................................................................5

3. ABSOLUTE MAXIMUM RATINGS ..........................................................................................5

3.1 ABSOLUTE RATINGS OF ENVIRONMENT ......................................................................5

3.2 ELECTRICAL ABSOLUTE RATINGS ................................................................................6

3.2.1 TFT LCD MODULE .................................................................................................... 6

3.2.2 BACKLIGHT UNIT...................................................................................................... 6

4. ELECTRICAL SPECIFICATIONS ............................................................................................7

4.1 FUNCTION BLOCK DIAGRAM..........................................................................................7

4.2. INTERFACE CONNECTIONS ..........................................................................................7

4.3 ELECTRICAL CHARACTERISTICS ..................................................................................9

4.3.1 LCD ELETRONICS SPECIFICATION ........................................................................ 9

4.3.2 Vcc Power Dip Condition...........................................................................................11

4.3.3 BACKLIGHT UNIT.....................................................................................................11

4.3.4 LIGHTBAR Connector Pin Assignment .................................................................... 12

4.4 LVDS INPUT SIGNAL SPECIFICATIONS........................................................................13

4.4.1 LVDS DATA MAPPING TABLE ................................................................................. 13

4.4.2 COLOR DATA INPUT ASSIGNMENT....................................................................... 14

4.5 DISPLAY TIMING SPECIFICATIONS ..............................................................................15

5. OPTICAL CHARACTERISTICS ............................................................................................18

5.1 TEST CONDITIONS ........................................................................................................18

5.2 OPTICAL SPECIFICATIONS ...........................................................................................18

6. RELIABILITY TEST ITEM......................................................................................................21

7. PACKING ...............................................................................................................................22

7.1 PACKING SPECIFICATIONS ..........................................................................................22

7.2 PACKING METHOD.........................................................................................................22

7.3 PALLET............................................................................................................................ 23

8. CMI MODULE LABEL ........................................................................................................... 24

9. PRECAUTIONS .....................................................................................................................25

9.1 ASSEMBLY AND HANDLING PRECAUTIONS................................................................25

9.2 STORAGE PRECAUTIONS............................................................................................. 25

9.3 OPERATION PRECAUTIONS .........................................................................................25

9.4 SAFETY PRECAUTIONS ................................................................................................26

Version 3.3 29 February 2012 2 / 28

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

PRODUCT SPECIFICATION

9.5 SAFETY STANDARDS ....................................................................................................26

9.6 OTHER ............................................................................................................................26

Appendix. OUTLINE DRAWING ...............................................................................................26

Version 3.3 29 February 2012 3 / 28

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

g

www.panelook.com

PRODUCT SPECIFICATION

REVISION HISTORY

Version Date Page Description

1.0 Jun,08,2011 All Spec Ver.1.0 was first issued.
Note (1) Add LDVS connector type & vendor:

3.0 July,29,2011 8

15

18

3.1 Aug.25,2011 16

3.2 Nov.18,2011 9

9

WF13-422-3033(Fullconn) or 187098-30091(Ptwo) or
GS23302-0311R-7H(Foxconn)

4.3.1 LCD ELETRONICS SPECIFICATION

Modify LVDS common input voltage spec
Min: 1 Æ 0.05
Typ: 1.2 Æ ---­Max:1.4 Æ 2.35

4.5 DISPLAY TIMING SPECIFICATIONS
Modify Input Clock to data skew
Max:400 Æ350 ps

5.2 OPTICAL SPECIFICATIONS

Modify Color Chromaticity spec (typ)
Rx: 0.637 ->0.635 Ry:0.351 ->0.352
Gx: 0.319 ->0.321 Gy:0.626 ->0.633
Bx: 0.145 ->0.151 By:0.061 ->0.052

4.5 DISPLAY TIMING SPECIFICATIONS
Add Note (4)
(The DCLK range at last line of V-blankin
Hdisplay/2)

4.3.1 LCD ELETRONICS SPECIFICATION
Update Power supply current:
Pattern typ max Î typ max
White 0.42 0.47 0.39 0.45
Black 1.2 1.4 1.17 1.45
Vertical 0.69 0.71 0.75 1.0
Power consumption:
PLCD typ max Î typ max

6.0 7.7 5.85 7.97

should be set in 0 to

4.3.3 BACKLIGHT UNIT

3.3 Feb.22.2012 11

12 Add connector type description(Wire Harness)

Add Vp min value
LED Light Bar Input Voltage min type min type
Per Input Pin -- 34.1 Î30.8 34.1

Version 3.3 29 February 2012 4 / 28

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

1. GENERAL DESCRIPTION

1.1 OVERVIEW

M215HGE-L21 is a 21.5” TFT Liquid Crystal Display module with WLED Backlight unit and 30 pins

2ch-LVDS interface. This module supports 1920 x 1080 Full HD mode and can display up to 16.7M colors.

The converter module for Backlight is not built in.

1.2 GENERAL SPECIFICATIONS

Item Specification Unit Note

Screen Size 21.53” real diagonal

Driver Element a-si TFT active matrix - -

Pixel Number 1920 x R.G.B. x 1080 pixel -

Pixel Pitch 0.2482 (H) x 0.2482 (V) mm -

Pixel Arrangement RGB vertical stripe - -

Display Colors 16.7M color -

Transmissive Mode Normally white - -

Surface Treatment AG type, 3H hard coating, Haze 25 - -

Luminance, White 250 Cd/m2

Color Gamut 72% of NTSC(Typ.) - -

TCO TCO 5.0 compliance

Power Consumption Total 18.29W (Max.) @ cell 7.97W (Max.), BL:10.32W (Max.) (1)

www.panelook.com

PRODUCT SPECIFICATION

Note (1) The specified power consumption: Total= cell (reference 4.3.1)+BL (reference 4.3.3)

2. MECHANICAL SPECIFICATIONS

Item Min. Typ. Max. Unit Note

Horizontal (H)

Module Size

Bezel Area

Active Area

Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.

Vertical (V) 291.7 292.2 292.7 mm

Thickness (T) - 11.0 11.5 mm

Horizontal 479.3 479.8 480.3 mm

Vertical 270.8 271.3 271.8 mm

Horizontal 476.64 - mm

Vertical 268.11 - mm

Weight - 1910 2100 g

495.1 495.6 496.1

mm

3. ABSOLUTE MAXIMUM RATINGS

3.1 ABSOLUTE RATINGS OF ENVIRONMENT

Item Symbol

Min. Max.

Storage Temperature TST -20 60 ºC (1)

Operating Ambient Temperature TOP 0 50 ºC (1), (2)

Value

Unit Note

(1)

Note (1)

(a) 90 %RH Max. (Ta <= 40 ºC).

(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).

(c) No condensation.

Version 3.3 29 February 2012 5 / 28

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Note (2) Panel surface temperature should be 0к min. and 65к max under Vcc=5.0V, fr =60Hz, typical

LED string current, 25к ambient temperature, and no humidity control . Any condition of ambient operating

temperature ,the surface of active area should be keeping not higher than 65к.

www.panelook.com

PRODUCT SPECIFICATION

3.2 ELECTRICAL ABSOLUTE RATINGS

3.2.1 TFT LCD MODULE

Item Symbol

Power Supply Voltage VCCS -0.3 6.0 V

Logic Input Voltage VIN -0.3 3.6 V

Value

Min. Max.

Unit Note

3.2.2 BACKLIGHT UNIT

Item Symbol

LED Forward Current Per

Input Pin

LED Pulse Forward

Current Per Input Pin

Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation

should be restricted to the conditions described under Normal Operating Conditions.

Note (2) Specified values are for input pin of LED light bar at Ta=25±2 к (Refer to 4.3.3 and 4.3.4 for

IF -- 65 69 mA

IP -- -- 150 mA

Min. Typ Max.

Value

Unit Note

(1), (2)

Duty=100%

(1), (2)

Pulse WidthЉ10msec.

and DutyЉ30%

(1)

further information).

Version 3.3 29 February 2012 6 / 28

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

4. ELECTRICAL SPECIFICATIONS

4.1 FUNCTION BLOCK DIAGRAM

www.panelook.com

PRODUCT SPECIFICATION

4.2. INTERFACE CONNECTIONS

PIN ASSIGNMENT

Pin Name Description

1 RXO0- Negative LVDS differential data input. Channel O0 (odd)
2 RXO0+ Positive LVDS differential data input. Channel O0 (odd)
3 RXO1- Negative LVDS differential data input. Channel O1 (odd)
4 RXO1+ Positive LVDS differential data input. Channel O1 (odd)
5 RXO2- Negative LVDS differential data input. Channel O2 (odd)
6 RXO2+ Positive LVDS differential data input. Channel O2 (odd)
7 GND Ground
8 RXOC- Negative LVDS differential clock input. (odd)

9 RXOC+ Positive LVDS differential clock input. (odd)
10 RXO3- Negative LVDS differential data input. Channel O3(odd)
11 RXO3+ Positive LVDS differential data input. Channel O3 (odd)
12 RXE0- Negative LVDS differential data input. Channel E0 (even)
13 RXE0+ Positive LVDS differential data input. Channel E0 (even)
14 GND Ground
15 RXE1- Negative LVDS differential data input. Channel E1 (even)
16 RXE1+ Positive LVDS differential data input. Channel E1 (even)
17 GND Ground
18 RXE2- Negative LVDS differential data input. Channel E2 (even)
19 RXE2+ Positive LVDS differential data input. Channel E2 (even)
20 RXEC- Negative LVDS differential clock input. (even)
21 RXEC+ Positive LVDS differential clock input. (even)
22 RXE3- Negative LVDS differential data input. Channel E3 (even)
23 RXE3+ Positive LVDS differential data input. Channel E3 (even)
24 GND Ground
25 NC For LCD internal use only, Do not connect

Version 3.3 29 February 2012 7 / 28

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

26 NC For LCD internal use only, Do not connect
27 NC For LCD internal use only, Do not connect
28 Vcc +5.0V power supply
29 Vcc +5.0V power supply
30 Vcc +5.0V power supply

Note (1) Connector Part No.:

WF13-422-3033(Fullconn) or 187098-30091(Ptwo) or GS23302-0311R-7H(Foxconn) equivalent

Note (2) User’s connector Part No:

Mating Wire Cable Connector Part No.: FI-X30H(JAE) or FI-X30HL(JAE)

Mating FFC Cable Connector Part No.: 217007-013001 (P-TWO) or JF05X030-1 (JAE).

Note (3) The first pixel is odd.

Note (4) Input signal of even and odd clock should be the same timing.

www.panelook.com

PRODUCT SPECIFICATION

1,1

(odd)

2,1

3,1

1,2

(even)

2,2

1,3

(odd)

1,4

(even)

1,Xmax

Pitch

Pitch

Ymax,1

Version 3.3 29 February 2012 8 / 28

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Ymax,

Xmax

www.panelook.com

Global LCD Panel Exchange Center

4.3 ELECTRICAL CHARACTERISTICS

4.3.1 LCD ELETRONICS SPECIFICATION

Parameter Symbol

Power Supply Voltage Vcc 4.5 5.0 5.5 V -

Ripple Voltage VRP -- -- 300 mV -

Rush Current I

AC off Rush Current Ioff_

Power Supply Current

Vertical Stripe

Power Consumption PLCD - 5.85 7.97 Watt (4)

LVDS differential input voltage Vid 100 - 600 mV

LVDS common input voltage Vic 0.05 -- 2.35 V

Note (1) The ambient temperature is Ta = 25 ± 2 ºC.

www.panelook.com

PRODUCT SPECIFICATION

Value

Min. Typ. Max.

-- -- 3 A (2)

RUSH

- -- 4 A (5)

RUSH

White -- 0.39 0.45 A (3)a
Black -- 1.17 1.45 A (3)b

-

-

-

-- 0.75 1.00 A (3)c

Unit Note

Note (2) Measurement Conditions:

Version 3.3 29 February 2012 9 / 28

The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com