How it Works
CHIMEI INNOLUX
Loading...
M190E8-L01
Specification
25 pgs954.51 Kb0

CHIMEI INNOLUX M190E8-L01 Specification

Download
Page 1
Global LCD Panel Exchange Center
Issued Date: Oct., 16, 2008
www.panelook.com
Model No.: M190E8-L01
Tent a tive
TFT LCD Tentative Specification
MODEL NO.: M190E8-L01
Customer:
Approved by:
Note:
1 / 25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 2
Global LCD Panel Exchange Center
Issued Date: Oct., 16, 2008
www.panelook.com
Model No.: M190E8-L01
Tent a tive
- CONTENTS -
REVISION HISTORY ............................................................................................................................ 3
1. GENERAL DESCRIPTION ................................................................................................................ 4
1.1 OVERVIEW
1.2 FEATURES
1.3 APPLICATION
1.4 GENERAL SPECIFICATIONS
1.5 MECHANICAL SPECIFICATIONS
2. ABSOLUTE MAXIMUM RATINGS.....................................................................................................5
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
2.2 ELECTRICAL ABSOLUTE RATINGS
2.2.1 TFT LCD MODULE
2.2.2 BACKLIGHT UNIT
3. ELECTRICAL CHARACTERISTICS.................................................................................................. 7
3. 1.1 TFT LCD MODULE
3.1.2 Vcc Power Dip Condition
3.2 BACKLIGHT UNIT
4. BLOCK DIAGRAM............................................................................................................................. 11
4.1 TFT LCD MODULE
4.2 BACKLIGHT UNIT
5. INPUT TERMINAL PIN ASSIGNMENT.............................................................................................. 12
5.1 TFT LCD MODULE
5.2 LVDS DATA MAPPING TABLE
5.3 BACKLIGHT UNIT
5.4 COLOR DATA INPUT ASSIGNMENT
6. INTERFACE TIMING......................................................................................................................... 15
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
6.2 POWER ON/OFF SEQUENCE
7. OPTICAL CHARACTERISTICS......................................................................................................... 17
7.1 TEST CONDITIONS
7.2 OPTICAL SPECIFICATIONS
8. PACKAGING..................................................................................................................................... 20
8.1 PACKING SPECIFICATIONS
8.2 PACKING METHOD
9. DEFINITION OF LABELS...............................................................................................................22~23
10. PRECAUTIONS............................................................................................................................... 23
10.1 ASSEMBLY AND HANDLING PRECAUTIONS
10.2 SAFETY PRECAUTIONS
10.3 OTHER
11. MECHANICAL CHARACTERISTICS……………………………………………………………………….24
2 / 25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 3
Global LCD Panel Exchange Center
Issued Date: Oct., 16, 2008
www.panelook.com
Model No.: M190E8-L01
Tent a tive
REVISION HISTORY
Date Section Description
0.1
Oct., 17, 08’
All
Tentative spec
3 / 25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 4
Global LCD Panel Exchange Center
Issued Date: Oct., 16, 2008
www.panelook.com
Model No.: M190E8-L01
Tent a tive
1. GENERAL DESCRIPTION
1.1 OVERVIEW
M190E8-L01 is a 19” TFT Liquid Crystal Display module with 2 CCFL Backlight unit and 30 pins
2ch-LVDS interface. This module supports 1280 x 1024 SXGA mode and can display 16.7M colors. The
inverter module for Backlight is not built in.
1.2 FEATURES
- Super Wide viewing angle.
- Super High contrast ratio
- Super fast response time
- High color saturation
- SXGA (1280 x 1024 pixels) resolution
- DE (Data Enable) only mode
- LVDS (Low Voltage Differential Signaling) interface
- RoHS Compliance
1.3 APPLICATION
- TFT LCD Monitor
1.4 GENERAL SPECIFICATI0NS
Item Specification Unit Note Diagonal Size 396 (H) x 324 (V) mm Active Area 376.32 (H) x 301.056 (V) mm Bezel Opening Area 380.3 (H) x 305 (V) mm Driver Element a-si TFT active matrix - ­Pixel Number 1280 x R.G.B. x 1024 pixel ­Pixel Pitch 0.098 (H) x 0.294 (V) mm ­Pixel Arrangement RGB vertical stripe - ­Display Colors 16.7M color ­Transmissive Mode Normally White - ­Color Saturation 72%NTSC (typ.) Surface Treatment Hard coating (3H), Anti-glare (Haze 25) - ­Module Power Consumption TBD Watt (2)
(1)
1.5 MECHANICAL SPECIFICATIONS
Item Min. Typ. Max. Unit Note
Horizontal(H) 395.5 396 396.5 mm
Module Size
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
Note (2) Please refer to sec.3.1 & 3.2 for more information of power consumption
Vertical(V) 323.5 324 324.5 mm Depth(D) - 15.5 16.0 mm
Weight - TBD 2200 g -
4 / 25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
(1)
www.panelook.com
Page 5
Global LCD Panel Exchange Center
p
www.panelook.com
Issued Date: Oct., 16, 2008
Model No.: M190E8-L01
Tent a tive
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item Symbol
Min. Max. Storage Temperature TST -20 +60 ºC (1) Operating Ambient Temperature TOP 0 +50 ºC (1), (2) Shock (Non-Operating) S Vibration (Non-Operating) V
- 50 G (3), (5)
NOP
- 1.5 G (4), (5)
NOP
Note (1) Temperature and relative humidity range is shown in the figure below.
Value
Unit Note
(a) 90 %RH Max. (Ta
Љ 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Note (2) The temperature of panel display surface area should be 0 ºC Min. and 60 ºC Max.
Relative Humidity (%RH)
100
90
80
60
40
20
10
Temperature (ºC)
Operating Range
Storage Range
8060-20 40020-40
Note (3) 50G/11ms, half sine wave, 1 time for ± X, ± Y, ± Z.
Note (4) 10 ~ 300 Hz, 10min/cycle, 3 cycles each X, Y, Z.
Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough
so that the module would not be twisted or bent by the fixture.
At Room Tem
erature
Side Mount Fixing Screw
LCD Module
Side Mount Fixing Screw
Stage
Gap=2mm
Bracket
5 / 25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 6
Global LCD Panel Exchange Center
Issued Date: Oct., 16, 2008
www.panelook.com
Model No.: M190E8-L01
Tent a tive
2.2 ELECTRICAL ABSOLUTE RATINGS
2.2.1 TFT LCD MODULE
Item Symbol
Power Supply Voltage Vcc -0.3 +6.0 V (1)
Min. Max.
2.2.2 BACKLIGHT UNIT
Item Symbol
Lamp Voltage VL - 2.0K V Lamp Current IL - 8.0 mA Lamp Frequency FL - 80 KHz
Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation
should be restricted to the conditions described under Normal Operating Conditions.
Min. Max.
Value
Value
Unit Note
Unit Note
(1), (2), IL = 7.5mA
RMS
RMS
(1), (2)
Note (2) Specified values are for lamp (Refer to 3.2 for further information).
6 / 25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 7
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Oct., 16, 2008
Model No.: M190E8-L01
Tent a tive
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE
Parameter Symbol
Ta = 25 ± 2 ºC
Value
Min. Typ. Max.
Unit Note
Power Supply Voltage Vcc 4.5 5.0 5.5 V ­Ripple Voltage VRP - - 100 mV ­Rush Current I
White - TBD TBD A (3)a
Power Supply Current
Black - TBD TBD A (3)b Vertical Stripe
Power Consumption P
-
RUSH
lcc
LCD
TBD Watt (4)
- TBD TBD A (3)c
-
3 A (2)
LVDS differential input voltage Vid 100 - 600 mV LVDS common input voltage Vic - 1.2 - V
Note (1) The module should be always operated within above ranges.
Note (2) Measurement Conditions:
+5.0V
R1
47K
Q1 2SK1475
FUSE
C3
1uF
Vcc
(LCD Module Input)
(High to Low)
(Control Signal)
SW
+12V
R2
1K
47K
VR1
C1
1uF
0.01uF
Q2
2SK1470
C2
Vcc rising time is 470μs
Vcc
0.9Vcc
0.1Vcc
GND
470μs
7 / 25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 8
Global LCD Panel Exchange Center
Issued Date: Oct., 16, 2008
www.panelook.com
Model No.: M190E8-L01
Tent a tive
Note (3) The specified power supply current is under the conditions at Vcc = 5.0 V, Ta = 25 ± 2 ºC, fv = 60
Hz, whereas a power dissipation check pattern below is displayed.
a. White Pattern
Active Area
c. Vertical Stripe Pattern
b. Black Pattern
Active Area
R
G
R
B
G
R
B
G
R R
G
B
B
B
B
R
R
R
G
G
G
G
B
B
B
B
R
R
Note (4)The power consumption is specified at the pattern with the maximum current
3.2 Vcc POWER DIP CONDITION:
Active Area
4.0V
4.5V
Vcc
Td
Dip condition:
msTdVVccV 20,5.40.4 ≤≤≤
8 / 25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 9
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Oct., 16, 2008
Model No.: M190E8-L01
Tent a tive
3.3 BACKLIGHT UNIT
Parameter Symbol
Min. Typ. Max. Lamp Input Voltage VL 684 760 836 V Lamp Current IL 2.0 7.5 8.0 mA
Lamp Turn On Voltage VS
--- ---
--- ---
Value
1500(25
1710(0
к)
к)
Ta = 25 ± 2 ºC
Unit Note
IL = 7.5 mA
RMS
RMS
V
(2)
RMS
V
(2)
RMS
Operating Frequency FL 40 --- 80 KHz (3) Lamp Life Time LBL (30000) 50000 --- Hrs (5) Power Consumption PL --- 10.29 --- W (4), IL = 7.5 mA
Note (1) Lamp current is measured by utilizing high frequency current meters as shown below:
HV (Pink)
LV (White)
LCD
HV (Pink)
LV (White)
1
2
A
Inverter
A
Current Meter YOKOGAWA 2016
1
2
A
Note (2) The voltage shown above should be applied to the lamp for more than 1 second after startup.
(1)
Otherwise the lamp may not be turned on.
Note (3) The lamp frequency may produce interference with horizontal synchronous frequency from the
display, and this may cause line flow on the display. In order to avoid interference, the lamp
frequency should be detached from the horizontal synchronous frequency and its harmonics as far
as possible.
Note (4) P
= IL V
L
2 CCFLs
L
Note (5) The lifetime of lamp can be defined as the time in which it continues to operate under the condition
Ta = 25
o
2
C and IL = 6.0 mA rms until one of the following events occurs:
(a) When the brightness becomes or lower than 50% of its original value.
(b) When the effective ignition length becomes or lower than 80% of its original value. (Effective
ignition length is defined as an area that has higher than 70% brightness compared to the
brightness in the center point.)
Note (6) The waveform of the voltage output of inverter must be area-symmetric and the design of the
inverter must have specifications for the modularized lamp. The performance of the Backlight,
such as lifetime or brightness, is greatly influenced by the characteristics of the DC-AC inverter for
the lamp. All the parameters of an inverter should be carefully designed to avoid producing too
much current leakage from high voltage output of the inverter. When designing or ordering the
inverter please make sure that a poor lighting caused by the mismatch of the Backlight and the
inverter (miss-lighting, flicker, etc.) never occurs. If the above situation is confirmed, the module
9 / 25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 10
Global LCD Panel Exchange Center
Issued Date: Oct., 16, 2008
www.panelook.com
Model No.: M190E8-L01
Tent a tive
should be operated in the same manners when it is installed in your instrument.
The output of the inverter must have symmetrical (negative and positive) voltage waveform and
symmetrical current waveform.(Unsymmetrical ratio is less than 10%) Please do not use the inverter
which has unsymmetrical voltage and unsymmetrical current and spike wave. Lamp frequency may
produce interface with horizontal synchronous frequency and as a result this may cause beat on the
display. Therefore lamp frequency shall be as away possible from the horizontal synchronous
frequency and from its harmonics in order to prevent interference.
Requirements for a system inverter design, which is intended to have a better display performance, a
better power efficiency and a more reliable lamp. It shall help increase the lamp lifetime and reduce its
leakage current.
a. The asymmetry rate of the inverter waveform should be 10% below;
b. The distortion rate of the waveform should be within
c. The ideal sine wave form shall be symmetric in positive and negative polarities.
* Asymmetry rate:
I p
I -p
| I
* Distortion rate
I
p
Ѕ2 ± 10%;
– I –p | / I
p
(or I –p) / I
rms
rms
* 100%
10 / 25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 11
Global LCD Panel Exchange Center
)
Issued Date: Oct., 16, 2008
www.panelook.com
Model No.: M190E8-L01
Tent a tive
4. BLOCK DIAGRAM
4.1 TFT LCD MODULE
RXO0(+/-)
RXO1(+/-)
RXO2(+/-)
RXO3(+/-)
RXOC(+/-)
RXE0(+/-)
RXE1(+/-)
RXE2(+/-)
RXE3(+/-)
RXEC(+/-)
NC
Vcc
GND
FCI-10041195-002
(STM- MSAKT2407P30HA or
INPUT CONNECTOR
LVDS INPUT /
TIMING CONTROLLER
DC/DC CONVERTER &
REFERENCE VOLTAGE
VL
LAMP CONNECTOR
(YEONHO 35001HS-02L )
SCAN DRIVER IC
TFT LCD PANEL
(1280x3x1024)
DATA DRIVER IC
BACKLIGHT UNIT
4.2 BACKLIGHT UNIT
ʳ
ʳ
ʳ
ʳ
ʳ
ʳ
ʳ
ʳ
ʳ
ʳ
ʳ
ʳ
ʳ
1 HV(Pink)
2 LV(White)
1 HV(Pink)
2 LV(White)
ʳ
ʳ
Note: On the same side, the same-polarity lamp voltage design for lamps is recommended.
11 / 25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 12
Global LCD Panel Exchange Center
Issued Date: Oct., 16, 2008
www.panelook.com
Model No.: M190E8-L01
Tent a tive
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD MODULE
Pin Name Description
1 RXO0- Negative LVDS differential data input. Channel O0 (odd) 2 RXO0+ Positive LVDS differential data input. Channel O0 (odd) 3 RXO1- Negative LVDS differential data input. Channel O1 (odd) 4 RXO1+ Positive LVDS differential data input. Channel O1 (odd) 5 RXO2- Negative LVDS differential data input. Channel O2 (odd) 6 RXO2+ Positive LVDS differential data input. Channel O2 (odd) 7 GND Ground 8 RXOC- Negative LVDS differential clock input. (odd)
9 RXOC+ Positive LVDS differential clock input. (odd) 10 RXO3- Negative LVDS differential data input. Channel O3(odd) 11 RXO3+ Positive LVDS differential data input. Channel O3 (odd) 12 RXE0- Negative LVDS differential data input. Channel E0 (even) 13 RXE0+ Positive LVDS differential data input. Channel E0 (even) 14 GND Ground 15 RXE1- Negative LVDS differential data input. Channel E1 (even) 16 RXE1+ Positive LVDS differential data input. Channel E1 (even) 17 GND Ground 18 RXE2- Negative LVDS differential data input. Channel E2 (even) 19 RXE2+ Positive LVDS differential data input. Channel E2 (even) 20 RXEC- Negative LVDS differential clock input. (even) 21 RXEC+ Positive LVDS differential clock input. (even) 22 RXE3- Negative LVDS differential data input. Channel E3 (even) 23 RXE3+ Positive LVDS differential data input. Channel E3 (even) 24 GND Ground 25 NC Not connection, this pin should be open. 26 NC Not connection, this pin should be open. 27 AGMODE For internal test used 28 Vcc +5.0V power supply 29 Vcc +5.0V power supply 30 Vcc +5.0V power supply
Note (1) Connector Part No.: STM-MSAKT2407P30HA or STARCONN-093G30-B0001A..
Note (2) The first pixel is odd.
Note (3) Input signal of even and odd clock should be the same timing.
12 / 25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 13
Global LCD Panel Exchange Center
Issued Date: Oct., 16, 2008
www.panelook.com
Model No.: M190E8-L01
Tent a tive
5.2 LVDS DATA MAPPING TABLE
LVDS Channel O0
LVDS Channel O1
LVDS Channel O2
LVDS Channel O3
LVDS Channel E0
LVDS Channel E1
LVDS Channel E2
LVDS Channel E3
LVDS output D7 D6 D4 D3 D2 D1 D0 Data order OG0 OR5 OR4 OR3 OR2 OR1 OR0 LVDS output D18 D15 D14 D13 D12 D9 D8 Data order OB1 OB0 OG5 OG4 OG3 OG2 OG1 LVDS output D26 D25 D24 D22 D21 D20 D19 Data order DE NA NA OB5 OB4 OB3 OB2 LVDS output D23 D17 D16 D11 D10 D5 D27 Data order NA OB7 OB6 OG7 OG6 OR7 OR6 LVDS output D7 D6 D4 D3 D2 D1 D0 Data order EG0 ER5 ER4 ER3 ER2 ER1 ER0 LVDS output D18 D15 D14 D13 D12 D9 D8 Data order EB1 EB0 EG5 EG4 EG3 EG2 EG1 LVDS output D26 D25 D24 D22 D21 D20 D19 Data order DE NA NA EB5 EB4 EB3 EB2 LVDS output D23 D17 D16 D11 D10 D5 D27 Data order NA EB7 EB6 EG7 EG6 ER7 ER6
13 / 25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 14
Global LCD Panel Exchange Center
Issued Date: Oct., 16, 2008
www.panelook.com
Model No.: M190E8-L01
Tent a tive
5.3 BACKLIGHT UNIT
Pin Symbol Description Remark
1 HV High Voltage Pink 2 LV Low Voltage White
Note (1) Connector Part No.: YEONHO 35001 HS-02L or equivalent
Note (2) User’s connector Part No.: YEONHO 35001 WR-02L or equivalent
5.4 COLOR DATA INPUT ASSIGNMENT
The brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input for
the color. The higher the binary input, the brighter the color. The table below provides the assignment of
color versus data input.
Data Signal
Basic Colors
Gray Scale Of Red
Color
Black Red Green Blue Cyan Magenta Yellow White Red(0) / Dark Red(1) Red(2)
:
: Red(253) Red(254) Red(255)
R7 R6 R5 R4 R3 R2 R1 R0 R7 R6 G5 G4 G3 G2 G1 G0 R7 R6 B5 B4 B3 B2 B1 B0
0
0
1
1
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
:
:
:
:
1
1
1
1
1
1
Red Green Blue
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
1
1
1
1
0
1
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
1
1
0
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
Green(0) / Dark
Gray Scale Of Green
Gray Scale Of Blue
Note (1) 0: Low Level Voltage, 1: High Level Voltage
Green(1) Green(2)
:
: Green(253) Green(254) Green(255) Blue(0) / Dark Blue(1) Blue(2)
:
: Blue(253) Blue(254) Blue(255)
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
14 / 25
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
1
1
1
1
1
1
0
1
0
0
1
1
1
1
1
1
1
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
1
:
:
0
0
0
0
0
0 0
0
0
0
0
0
:
:
:
:
1
1
1
1
1
1
0
0
0
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
1
1
1
1
1
1
0
0
0
0
0
0
0
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
1
0
:
:
:
:
:
:
1
0
1 0
1
1
1
1
1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 15
Global LCD Panel Exchange Center
Issued Date: Oct., 16, 2008
www.panelook.com
Model No.: M190E8-L01
Tent a tive
6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
The input signal timing specifications are shown as the following table and timing diagram.
Signal Item Symbol Min. Typ. Max. Unit Note
Frequency Fc 45 54 67.5 MHz -
LVDS Clock
LVDS Data
Vertical Active Display Term
Horizontal Active Display Term
Period Tc 14.9 18.5 22.2 ns High Time Tch - 4/7 - Tc ­Low Time Tcl - 3/7 - Tc ­Setup Time Tlvs 600 - - ps ­Hold Time Tlvh 600 - - ps ­Frame Rate Fr 50 60 75 Hz Tv=Tvd+Tvb Total Tv TBD 1066 TBD Th - Display Tvd 1024 1024 1024 Th ­Blank Tvb 10 42 Tv-Tvd Th ­Tot a l Th TBD 844 TBD Tc Th=Thd+Thb Display Thd 640 640 640 Tc ­Blank Thb 100 204 Th-Thd Tc -
Note: Because this module is operated by DE only mode, Hsync and Vsync input signals should be set
to low logic level or ground. Otherwise, this module would operate abnormally.
INPUT SIGNAL TIMING DIAGRAM
DE
Th
DCLK
C
DE
DATA
T
Thb
T
hd
15 / 25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 16
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Oct., 16, 2008
Model No.: M190E8-L01
Tent a tive
6.2 POWER ON/OFF SEQUENCE
To prevent a latch-up or DC operation of LCD module, the power on/off sequence should be as the
diagram below.
RestartPower On Power Off
Power Supply
for LCD, Vcc
-
Interface Signal (LVDS Signal of Transmitter), V
-
Power for Lamp
Timing Specifications:
0.5< t1
0 < t2
0 < t3
0V
0V
I
Љ 10 msec
Љ 50 msec
Љ 50 msec
t4
Њ 500 msec
t5
Њ 450 msec
10%
90%
t1
t2
90%
Valid Data
t6 t5
50%50%
ONOFF OFF
t3
t7
10%
10%
t4
t6
Њ 90 msec
5
Љ t7Љ 100 msec
Note.
(1) The supply voltage of the external system for the module input should be the same as the definition of Vcc.
(2) Apply the lamp voltage within the LCD operation range. When the backlight turns on before the LCD
operation of the LCD turns off before the backlight turns off, the display may momentarily become abnormal
screen.
(3) In case of VCC = off level, please keep the level of input signals on the low or keep a high impedance.
(4) T4 should be measured after the module has been fully discharged between power off and on period.
(5) Interface signal shall not be kept at high impedance when the power is on.
The company will not guarantee or compensate for the product damage caused by not following the Power
Sequence
16 / 25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 17
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Oct., 16, 2008
Model No.: M190E8-L01
Tent a tive
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
Item Symbol Value Unit
Ambient Temperature Ta
Ambient Humidity Ha
50
25
±
±
10
2
Supply Voltage VCC 5.0 V Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS" Lamp Current IL (7.5) mA Inverter Operating Frequency FL 55 KHz Inverter TBD
7.2 OPTICAL SPECIFICATIONS
The relative measurement methods of optical characteristics are shown in 7.2. The following items should
o
C
%RH
be measured under the test conditions described in 7.1 and stable environment shown in Note (5).
Item Symbol Condition Min. Typ. Max. Unit Note
Red
Green
Color Chromaticity
Blue
White
Center Luminance of White L
Rx
Ry
Gx Gy
Bx
By
Wx
Wy
C
Contrast Ratio CR
Response Time
White Variation
Horizontal
Viewing Angle
Vertical
TR --- 1.5 6.5 ms T
F
δ
W
θ
+
x
θ
x
θ
+
Y
θ
Y
Typ –
θ
x
=0°,
θ
=0°
Y
0.03
CS-1000T
(200) 250 --- cd/m2(4), (5)
θ
=0°,
θ
Њ
Y
θ
Y
10
=0°
=0°
-
x
θ
x
=0°,
CR
-
(0.647)
(0.334)
(0.284) (0.607) (0.151)
Typ +
0.03
(1), (5)
(0.071)
0.313
0.329
630 1000 --- - (2), (5)
--- 3.5 8.5 ms
---
1.3 1.5
- (5), (6)
75 85 --­75
70 70
85 ---
80 --­80 ---
Deg. (1), (5)
(3)
17 / 25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 18
Global LCD Panel Exchange Center
T
www.panelook.com
Issued Date: Oct., 16, 2008
Model No.: M190E8-L01
Tent a tive
Note (1) Definition of Viewing Angle (θx, θy):
θ
X-
= 90º
x-
6 o’clock
θ
y-
= 90º
y-
Note (2) Definition of Contrast Ratio (CR):
The contrast ratio can be calculated by the following expression.
Normal
θ
x = θy = 0º
θy- θy+
θx−
θx+
y+
12 o’clock direction
θ
y+
= 90º
x+
θ
X+
= 90º
Contrast Ratio (CR) = L255 / L0
L255: Luminance of gray level 255
L 0: Luminance of gray level 0
CR = CR (1)
CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (6).
Note (3) Definition of Response Time (T
100%
90%
Optical
Response
Gray Level
10%
0%
255
, TF):
R
Gray Level
Gray Level 0
T
R
T
F
255
ime
66.67ms
66.67ms
18 / 25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 19
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Oct., 16, 2008
Model No.: M190E8-L01
Tent a tive
Note (4) Definition of Luminance of White (LC):
Measure the luminance of gray level 255 at center point
LC = L (1)
L (x) is corresponding to the luminance of the point X at Figure in Note (6).
Note (5) Measurement Setup:
The LCD module should be stabilized at given temperature for 40 minutes to avoid abrupt
temperature change during measuring. In order to stabilize the luminance, the measurement
should be executed after lighting Backlight for 40 minutes in a windless room.
LCD Module
LCD Panel
Center of the Screen
Photometer
(CS-1000T, USB-2000)
=
º
Light Shield Room
(Ambient Luminance < 2
Note (6) Definition of White Variation (
Measure the luminance of gray level 255 at 13 points
δ
W = Maximum [L (1), L (2) ……L (4), L (13)] / Minimum [L (1), L (2) …… L (4), L (13)]
˄˃
ˉˊˋ
˛˂ˇ
ˌ ˄˃
˄˄ ˄˅ ˄ˆ
˄˃ ˄˃
˄˃
˪˂ˇ ˪˂ˇ ˪˂ˇ ˪˂ˇ
Vertical Line Number
˛
˛˂ˇ ˛˂ˇ ˛˂ˇ
δ
W):
Horizontal Line Number
˅ˆ
˄
ˇˈ
˪
X
Κ
Test Point
XЈ1 to 13
Active area
19 / 25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 20
Global LCD Panel Exchange Center
Issued Date: Oct., 16, 2008
www.panelook.com
Model No.: M190E8-L01
Tent a tive
8. PACKAGING
8.1 PACKING SPECIFICATIONS
(1) 8 LCD modules / 1 Box
(2) Box dimensions: 475(L) X 280 (W) X 440 (H) mm
(3) Weight: 20 Kg (8 modules per box)
8.2 PACKING METHOD
(1) Carton Packing should have no failure in the following reliability test items.
Test Item Test Conditions Note
ISTA STANDARD Random, Frequency Range: 1 – 200 Hz
Vibration
Dropping Test 1 Corner, 3 Edge, 6 Face, ISTA STANDARD Non Operation
Top & Bottom: 30 minutes (+Z), 10 min (-Z), Right & Left: 10 minutes (X) Back & Forth 10 minutes (Y)
Non Operation
Figure. 8-1 Packing method
20 / 25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 21
Global LCD Panel Exchange Center
Issued Date: Oct., 16, 2008
www.panelook.com
Model No.: M190E8-L01
Tent a tive
For ocean shipping
PE Sheet
Film
For air transport
Figure. 8-2 Packing method
Figure. 8-3 Packing method
21 / 25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 22
Global LCD Panel Exchange Center
Issued Date: Oct., 16, 2008
www.panelook.com
Model No.: M190E8-L01
Tent a tive
9. DEFINITION OF LABELS
9.1 CMO MODULE LABEL
The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation.
M190E8-L01 Rev. XX
(Fab ID)
RoHS
XXXXXXXYMDLNNNN
CM19E81XXXXXLXXLYM DNNNN
(a) Model Name: M190E8-L01
(b) Revision: Rev. XX, for example: A0, A1… B1, B2… or C1, C2…etc.
(c) CMO barcode definition:
Serial ID: XX
Code Meaning Description
XX CMO internal use ­XX Revision Cover all the change
X CMO internal use -
YMD
L Product line # Line 1=1, Line 2=2, Line 3=3, …
NNNN Serial number Manufacturing sequence of product
-XX-X-XX-YMD-L-NNNN
Year, month, day Year: 2001=1, 2002=2, 2003=3, 2004=4…
Month: 1~12=1, 2, 3, ~, 9, A, B, C Day: 1~31=1, 2, 3, ~, 9, A, B, C, ~, W, X, Y, exclude I, O, and U.
(d) Customer’s barcode definition:
Serial ID: CM
Code Meaning Description
CM Supplier code CMO=CM
19E81 Model number M190E8-L01=19E81
X Revision code Non ZBD: 1,2,~,8,9 / ZBD: A~Z
X Source driver IC code
X Gate driver IC code
XX Cell location Tainan, Taiwan=TN
L Cell line # 1,2,~,9,A,B,~,Y,Z
XX Module location Tainan, Taiwan=TN ; Ningbo China=NP
L Module line # 1,2,~,9,A,B,~,Y,Z
YMD
NNNN Serial number Manufacturing sequence of product
-19E81-X-X-X-XX-L-XX-L-YMD-NNNN
Century=1, CLL=2, Demos=3, Epson=4, Fujitsu=5, Himax=6, Hitachi=7, Hynix=8, LDI=9, Matsushita=A, NEC=B, Novatec=C, OKI=D, Philips=E, Renasas=F, Samsung=G, Sanyo=H, Sharp=I, TI=J, Topro=K, Toshiba=L, Windbond=M
Year, month, day Year: 2001=1, 2002=2, 2003=3, 2004=4…
Month: 1~12=1, 2, 3, ~, 9, A, B, C Day: 1~31= 1, 2, 3, ~, 9, A, B, C, ~, T, U, V
22 / 25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 23
Global LCD Panel Exchange Center
Issued Date: Oct., 16, 2008
www.panelook.com
Model No.: M190E8-L01
Tent a tive
(e) FAB ID(UL Factory ID):
Region Factory ID
TWCMO GEMN
NBCMO LEOO
NBCME CANO
NHCMO CAPG
10. PRECAUTIONS
10.1 ASSEMBLY AND HANDLING PRECAUTIONS
(1) Do not apply rough force such as bending or twisting to the module during assembly.
(2) To assemble or install module into user’s system can be only in clean working areas. The dust and oil
may cause electrical short or worsen the polarizer.
(3) It’s not permitted to have pressure or impulse on the module because the LCD panel and Backlight will
be damaged.
(4) Always follow the correct power sequence when LCD module is connecting and operating. This can
prevent damage to the CMOS LSI chips during latch-up.
(5) Do not pull the I/F connector in or out while the module is operating.
(6) Do not disassemble the module.
(7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and
easily scratched.
(8) It is dangerous that moisture come into or contacted the LCD module, because moisture may damage
LCD module when it is operating.
(9) High temperature or humidity may reduce the performance of module. Please store LCD module within
the specified storage conditions.
(10) When ambient temperature is lower than 10ºC may reduce the display quality. For example, the
response time will become slowly, and the starting voltage of CCFL will be higher than room
temperature.
10.2 SAFETY PRECAUTIONS
(1) The startup voltage of Backlight is approximately 1000 Volts. It may cause electrical shock while
assembling with inverter. Do not disassemble the module or insert anything into the Backlight unit.
(2) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In
case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap.
(3) After the module’s end of life, it is not harmful in case of normal operation and storage.
10.3 OTHER
When fixed patterns are displayed for a long time ,remnant image is likely to occur.
23 / 25
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 24
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 25
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use