CHIMEI INNOLUX M185B3-PA1 Specification

Global LCD Panel Exchange Center

ு଱ழၴ ຝ ᐉு ߡۥ ދป

ข঴ጥ෻๠

吳

柏勳

Issued Date: Jun, 10, 2010

www.panelook.com

Model No.: M185B3-PA1

Approval

TFT LCD Approval Specification

MODEL NO.: M185B3-PA1

Customer:

Approved by:

Note:

2010-06-10

10:51:12

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

1 / 25

MTR

2010.06.10

Director Accept

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

Issued Date: Jun, 10, 2010

www.panelook.com

Model No.: M185B3-PA1

Approval

- CONTENTS -

REVISION HISTORY ------------------------------------------------------- 3

1. GENERAL DESCRIPTION

1.1 OVERVIEW

1.2 FEATURES

1.3 APPLICATION

1.4 GENERAL SPECIFICATIONS

1.5 MECHANICAL SPECIFICATIONS

------------------------------------------------------- 4

2. ABSOLUTE MAXIMUM RATINGS ------------------------------------------------------- 5

2.1 ABSOLUTE RATINGS OF ENVIRONMENT (BASED ON CMO MODULE M185B3-LA1)

2.2 ABSOLUTE RATINGS OF ENVIRONMENT (OPEN CELL)

2.3 ELECTRICAL ABSOLUTE RATINGS (OPEN CELL)

3. ELECTRICAL CHARACTERISTICS ------------------------------------------------------- 7

3.1 TFT LCD OPEN CELL

3.2 Vcc POWER DIP CONDITION

4. BLOCK DIAGRAM ------------------------------------------------------- 9

4.1 TFT LCD OPEN CELL

5. INPUT TERMINAL PIN ASSIGNMENT ------------------------------------------------------- 10

5.1 TFT LCD MODULE

5.2 LVDS DATA MAPPING TABLE

5.3 COLOR DATA INPUT ASSIGNMENT

6. INTERFACE TIMING ------------------------------------------------------- 13

6.1 INPUT SIGNAL TIMING SPECIFICATIONS

6.2 POWER ON/OFF SEQUENCE

7. OPTICAL CHARACTERISTICS ------------------------------------------------------- 16

7.1 TEST CONDITIONS

7.2 OPTICAL SPECIFICATIONS

7.3 FLICKER ADJUSTMENT

8. PACKAGING ------------------------------------------------------- 21

8.1 PACKING SPECIFICATIONS

8.2 PACKING METHOD

9. DEFINITION OF LABELS ------------------------------------------------------- 22

9.1 OPEN CELL LABEL

9.2 CARTON LABEL

10. RELIABILITY TEST

11. PRECAUTIONS

11.1 ASSEMBLY AND HANDLING PRECAUTIONS

11.2 SAFETY PRECAUTIONS

11.3 OTHERS

12. MECHANICAL DRAWING

------------------------------------------------------- 23

------------------------------------------------------- 24

------------------------------------------------------- 25

2 / 25

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

Issued Date: Jun, 10, 2010

www.panelook.com

Model No.: M185B3-PA1

Approval

REVISION HISTORY

Version Date Section Description

Ver 2.0 April, 06, 10’

M185B3-PA1 Approval Specification was first issued.

All

3 / 25

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

Issued Date: Jun, 10, 2010

www.panelook.com

Model No.: M185B3-PA1

Approval

1. GENERAL DESCRIPTION

1.1 OVERVIEW

The M185B3-PA1 is a 18.5” TFT LCD cell with driver ICs and a 30-pins-1ch-LVDS circuit board.

The product supports 1366 x 768 WXGA mode and can display up to 16.7M colors. The backlight unit

is not built in.

1.2 FEATURES

- Contrast ratio 1000:1

- Response time 5ms.

- WXGA (1366 x 768 pixels) resolution.

- DE (Data Enable) only mode.

- LVDS (Low Voltage Differential Signaling) interface.

- RoHS compliance.

1.3 APPLICATION

- TFT LCD Monitor

- TFT LCD TV

1.4 GENERAL SPECIFICATI0NS

Item Specification Unit Note Diagonal Size 18.5 inch Active Area 409.8 (H) x 230.4 (V) mm (1) Driver Element a-si TFT active matrix - Pixel Number 1366 x R.G.B. x 768 pixel Pixel Pitch 0.3 (H) x 0.3 (V) mm Pixel Arrangement RGB vertical stripe - Display Colors 16.7M color Transmissive Mode Normally White - Surface Treatment Hard coating (3H), Anti-glare (Haze 25%) - Power Consumption 3.0 Watt (3)

1.5 MECHANICAL SPECIFICATIONS

Item Min. Typ. Max. Unit Note Weight I/F connector mounting position

Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.

The mounting inclination of the connector makes the screen center within ±0.5mm as the horizontal.

-

415 435 g -

- (2)

(2) Connector mounting position

(3) Please refer to sec.3.1 for more information of power consumption.

+/- 0.5mm

4 / 25

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

Issued Date: Jun, 10, 2010

www.panelook.com

Model No.: M185B3-PA1

Approval

2. ABSOLUTE MAXIMUM RATINGS

2.1 ABSOLUTE RATINGS OF ENVIRONMENT (BASED ON CMO MODULE M185B3-LA1)

Item Symbol

Storage Temperature TST -20 +60 ºC (1) Operating Ambient Temperature TOP 0 +50 ºC (1), (2)

Note (1) Temperature and relative humidity range is shown in the figure below.

(a) 90 %RH Max. (Ta 40 ºC).Љ

(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).

(c) No condensation.

Note (2) The temperature of panel display surface area should be 0 ºC Min. and 60 ºC Max.

Min. Max.

Value

Unit Note

Relative Humidity (%RH)

100

90

80

60

Operating Range

40

20 10

Storage Range

Temperature (ºC)

8060-20 40 0 20 -40

5 / 25

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

Issued Date: Jun, 10, 2010

www.panelook.com

Model No.: M185B3-PA1

Approval

2.2 ABSOLUTE RATINGS OF ENVIRONMENT (OPEN CELL)

High temperature or humidity may reduce the performance of panel. Please store LCD panel within

the specified storage conditions.

Storage Condition: With packing.

Storage temperature range: 25±5 ºC.

Storage humidity range: 50±10%RH.

Shelf life: 30days

2.3 ELECTRICAL ABSOLUTE RATINGS (OPEN CELL)

Item Symbol

Power Supply Voltage VCC -0.3 +6.0 V (1)

Logic Input Voltage Vlogic -0.3 2.7 V -

Note (1) Permanent damage might occur if the module is operated at conditions exceeding the maximum values.

Value

Min Max

Unit Note

6 / 25

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: Jun, 10, 2010

Model No.: M185B3-PA1

Approval

3. ELECTRICAL CHARACTERISTICS

3.1 TFT LCD OPEN CELL Ta = 25 ± 2 ºC

Parameter Symbol

Min. Typ. Max. Power Supply Voltage Vcc 4.5 5.0 5.5 V Ripple Voltage VRP - - 300 mV Power On Rush Current I

RUSH

- - 3 A (2)

White - 0.41 0.54 A (3)a

Power Supply Current

Black - 0.57 0.76 A (3)b Vertical Stripe

Power Consumption P

-

LCD

- 0.6 0.8 A (3)c

- 3.0 4.0 Watt (4) LVDS differential input voltage Vid 200 - 600 mV (5) LVDS common input voltage Vic - 1.2 - V Logic High Input Voltage VIH 2.0 - 2.7 V Logic Low Input Voltage VIL - - 0.5 V -

Note (1) The module should be always operated within above ranges.

Value

Unit Note

Note (2) Power On Rush Current Measurement Conditions: (must follow power sequence)

(High to Low)

(Control Signal)

SW

+12V

+5.0V

R1

47K

R2

1K

47K

VR1

C1

1uF

Q1 2SK1475

C2

0.01uF

Q2

2SK1470

FUSE

C3

1uF

Vcc rising time is 470μs

Vcc

(LCD Module Input)

Vcc

0.9Vcc

0.1Vcc

GND

470μs

7 / 25

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

Issued Date: Jun, 10, 2010

www.panelook.com

Model No.: M185B3-PA1

Approval

Note (3) The specified power supply current is under the conditions at Vcc = 5.0 V, Ta = 25 ± 2 ºC, Fv = 60

Hz, whereas a power dissipation check pattern below is displayed.

a. White Pattern

Active Area

c. Vertical Stripe Pattern

b. Black Pattern

Active Area

R

G

R

B

G

R

B

G

R R

G

B

R

G

B

R

Active Area

Note (4) The power consumption is specified at the pattern with the maximum current.

Note (5) VID waveform condition

8 / 25

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

≤≤≤

)

www.panelook.com

Issued Date: Jun, 10, 2010

Model No.: M185B3-PA1

Approval

3.2 Vcc POWER DIP CONDITION:

Vcc

4.5V

4.0V

Td

Dip condition:

4. BLOCK DIAGRAM

4.1 TFT LCD OPEN CELL

RX0(+/-)

RX1(+/-)

RX2(+/-)

RX3(+/-)

RXC(+/-)

NC

Vcc

GND

(STM MSCKT2407P30H

INPUT CONNECTOR

or EQUIVALENT

msTdVVccV 20,5.40.4

LVDS INPUT /

TIMING CONTROLLER

DC/DC CONVERTER &

REFERENCE VOLTAGE

SCAN DRIVER IC

TFT LCD PANEL

(1366x3x768)

DATA DRIVER IC

9 / 25

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

Issued Date: Jun, 10, 2010

www.panelook.com

Model No.: M185B3-PA1

Approval

5. INPUT TERMINAL PIN ASSIGNMENT

5.1 TFT LCD MODULE

Pin Name Description

1 NC Not connection, this pin should be open. 2 NC Not connection, this pin should be open. 3 NC Not connection, this pin should be open. 4 GND Ground 5 RX0- Negative LVDS differential data input. Channel 0 6 RX0+ Positive LVDS differential data input. Channel 0 7 GND Ground 8 RX1- Negative LVDS differential data input. Channel 1

9 RX1+ Positive LVDS differential data input. Channel 1 10 GND Ground 11 RX2- Negative LVDS differential data input. Channel 2 12 RX2+ Positive LVDS differential data input. Channel 2 13 GND Ground 14 RXCLK- Negative LVDS differential clock input. 15 RXCLK+ Positive LVDS differential clock input. 16 GND Ground 17 RX3- Negative LVDS differential data input. Channel 3 18 RX3+ Positive LVDS differential data input. Channel 3 19 GND Ground 20 NC Not connection, this pin should be open. 21 NC Not connection, this pin should be open. 22 NC 23 GND Ground 24 GND Ground 25 GND Ground 26 Vcc +5.0V power supply 27 Vcc +5.0V power supply 28 Vcc +5.0V power supply 29 Vcc +5.0V power supply 30 Vcc +5.0V power supply

Note (1) Connector Part No.: STM MSCKT2407P30H or equivalent.

For LCD internal use only, Do not connect

10 / 25

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

Issued Date: Jun, 10, 2010

www.panelook.com

Model No.: M185B3-PA1

Approval

5.2 LVDS DATA MAPPING TABLE

LVDS Channel 0

LVDS Channel 1

LVDS Channel 2

LVDS Channel 3

LVDS output D7 D6 D4 D3 D2 D1 D0 Data order G0 R5 R4 R3 R2 R1 R0 LVDS output D18 D15 D14 D13 D12 D9 D8 Data order B1 B0 G5 G4 G3 G2 G1 LVDS output D26 D25 D24 D22 D21 D20 D19 Data order DE NA NA B5 B4 B3 B2 LVDS output D23 D17 D16 D11 D10 D5 D27 Data order NA B7 B6 G7 G6 R7 R6

11 / 25

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

Issued Date: Jun, 10, 2010

www.panelook.com

Model No.: M185B3-PA1

Approval

5.3 COLOR DATA INPUT ASSIGNMENT

The brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input for

the color. The higher the binary input, the brighter the color. The table below provides the assignment of

color versus data input.

Data Signal

Color

R7 R6 R5 R4 R3 R2 R1 R0 R7 R6 G5 G4 G3 G2 G1 G0 R7 R6 B5 B4 B3 B2 B1 B0

Black Red

Green Basic Colors

Gray Scale Of Red

Gray Scale Of Green

Gray Scale Of Blue

Note (1) 0: Low Level Voltage, 1: High Level Voltage

Blue

Cyan

Magenta

Yellow

White

Red(0) / Dark

Red(1)

Red(2)

:

: Red(253) Red(254) Red(255) Green(0) / Dark Green(1) Green(2)

:

: Green(253) Green(254) Green(255) Blue(0) / Dark Blue(1) Blue(2)

:

: Blue(253) Blue(254) Blue(255)

0

1

0

1

0

:

1

0

:

0

:

0

Red Green Blue

0

1

0

1

0

1

0

1

0

1

0

1

0

1

0

1

0

:

1

0

1

0

1

0

1

0

1

0

1

0

:

0

1

0

1

0

1

0

1

0

:

0

1

0

1

0

1

0

1

0

1

0

:

0

:

0

1

:

1

0

1

0 0 0 1 1 1 0 1 0 0 0

:

: 0 0 0 0 0 0

:

: 0 0 0 0 1 0

:

: 1 0 1

12 / 25

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

Issued Date: Jun, 10, 2010

www.panelook.com

Model No.: M185B3-PA1

Approval

6. INTERFACE TIMING

6.1 INPUT SIGNAL TIMING SPECIFICATIONS

The input signal timing specifications are shown as the following table and timing diagram.

Signal Item Symbol Min. Typ. Max. Unit Note

Frequency Fc 60 76 96 MHz Period Tc - 13.0 - ns Input cycle to cycle jitter Spread spectrum

LVDS Clock

LVDS Da t a

Vertical Active Display Term

Horizontal Active Display Term

Note: Because this module is operated by DE only mode, Hsync and Vsync input signals are ignored.

modulation range Spread spectrum modulation frequency High Time Tch - 4/7 - Tc Low Time Tcl - 3/7 - Tc Setup Time Tlvs 600 - - ps Hold Time Tlvh 600 - - ps Frame Rate Fv 50 60 75 Hz Total Tv 800 806 815 Th Tv=Tvd+Tvb Display Tvd 768 768 768 Th Blank Tvb Tv-Tvd 38 Tv-Tvd Th Total Th 1500 1560 1570 Tc Th=Thd+Thb Display Thd 1366 1366 1366 Tc Blank Thb Th-Thd 194 Th-Thd Tc -

- - 200 ps (1)

T

rcl

clkin_mod

F

Fc*98% - Fc*102% MHz

- - 200 KHz

SSM

(2)

(3)

DE

DCLK

DE

DATA

INPUT SIGNAL TIMING DIAGRAM

Th

T

C

Thb

hd

T

13 / 25

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

Issued Date: Jun, 10, 2010

www.panelook.com

Model No.: M185B3-PA1

Approval

Note (1) The input clock cycle-to-cycle jitter is defined as below figures. Trcl = I T1 – TI

T1

Note (2) The SSCG (Spread spectrum clock generator) is defined as below figures.

Note (3) The LVDS timing diagram and setup/hold time is defined and showing as the following figures.

LVDS RECEIVER INTERFACE TIMING DIAGRAM

Tc

RXCLK+/-

RXn+/-

Tlvs

Tlvh

1

14

7

T

c

3

14

T

c

T

5

c

14

T

c

14

14 / 25

9

14

T

c

11

14

T

c

13

T

c

14

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: Jun, 10, 2010

Model No.: M185B3-PA1

Approval

6.2 POWER ON/OFF SEQUENCE

To prevent a latch-up or DC operation of LCD module, the power on/off sequence should be as the

diagram below.

Power On

Power Off

Restart

- Power Supply

for LCD, Vcc

- Interface Signal

(LVDS Signal of Transmitter), V

I

- Power for Backlight

Timing Specifications:

0.5< t1 Љ 5 msec

0 < t2 Љ 50 msec

0 < t3 Љ 50 msec

t4 Њ 500 msec

t5 Њ 450 msec

0V

10%

90%

t1

t2

Valid Data

t6t5

50%50%

ONOFF OFF

t7

10%

t4

t3

10%

t6 Њ 90 msec

5 t7 100 msecЉЉ

Note.

(1) The supply voltage of the external system for the module input should be the same as the definition of Vcc.

(2) When the backlight turns on before the LCD operation of the LCD turns off, the display may momentarily

become abnormal screen.

(3) In case of VCC = off level, please keep the level of input signals on the low or keep a high impedance.

(4) T4 should be measured after the module has been fully discharged between power off and on period.

(5) Interface signal shall not be kept at high impedance when the power is on.

(6)

It is not guaranteed that products are damaged which is caused by not following the Power Sequence.

(7) It is suggested that Vcc falling time follows t7 specification, else slight noise is likely to occur when LCD is

turned off (even backlight is already off).

15 / 25

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: Jun, 10, 2010

Model No.: M185B3-PA1

Approval

7. OPTICAL CHARACTERISTICS

7.1 TEST CONDITIONS

Item Symbol Value Unit Ambient Temperature Ta Ambient Humidity Ha

25±2

50±10

Supply Voltage VCC 5.0 V Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS" Inverter Current I

Inverter Driving Frequency F

L

7.0±0.5 55±5

7.2 OPTICAL SPECIFICATIONS

The relative measurement methods of optical characteristics are shown as below. The following items

should be measured under the test conditions described in 7.1 and stable environment shown in Note (6).

Item Symbol Condition Min. Typ. Max. Unit Note

Red

Green

Color Chromaticity

Blue

White

Center Transmittance T% Contrast Ratio CR

Response Time

Transmittance uniformity δT

Horizontal θ

Viewing Angle

Vertica l θ

Rcx 0.645 Rcy

0.328 Gcx 0.275 Gcy

Bcx 0.148

θ

=0° , θY =0°

x

DMS 803

Typ -

-0.03

Bcy

0.580

0.105

Typ +

0.03

Wcx 0.322 Wcy

θ

=0° , θY =0°

x

0.351

5.4 6.0 - %

CS-2000, CMO BLU 700 1000

1.3 2.2 ms

3.7 5.8 ms

170

160

x

Y

T

R

T

F

++θ

θ

=0° , θY =0°

x

θ

=0° , θY =0°

x

USB-2000

-

x

-

Y

CR≥10

USB-2000

-

- -- 1.42 -

150

140

o

C

%RH

mA

KHz

-

(0),(7)

-

(1), (5)

-

- (1), (3)

(4)

(1), (8)

-

Deg.

-

(1), (2)

(6)

-

16 / 25

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

Issued Date: Jun, 10, 2010

www.panelook.com

Model No.: M185B3-PA1

Approval

7.3 Flicker Adjustment

Flicker must be finely adjusted after module assembling and aging. Please follow the instructions below.

(1) Adjustment Pattern: 2H1V checker pattern as follows.

(2) Adjustment Method:

Flicker should be adjusted by turning the volume for flicker adjustment by the ceramic driver. It is adjusted

to the point with least flickering of the whole screen. After making it surely overrun at once, it should be

adjusted to the optimum point.

17 / 25

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

Issued Date: Jun, 10, 2010

www.panelook.com

Model No.: M185B3-PA1

Approval

Note (0) Light source is the standard light source “C” which is defined by CIE and driving voltages are based on

suitable gamma voltages

Note (1) Light source is the BLU, which is supplied by CMO, and driving voltages are based on suitable gamma

voltages. White is without signal input and R, G, B are with signal input. SPEC is judged by CMO’s

golden sample

Note (2) Definition of Viewing Angle (θx, θy):

Normal

θx = θy = 0º

θX- = 90º

6 o’clock

θ

y- = 90º

Note (3) : Definition of Contrast Ratio (CR):

The contrast ratio can be calculated by the following expression.

Contrast Ratio (CR) = L255 / L0

L255: Luminance of gray level 255

L 0: Luminance of gray level 0

CR = CR (5)

x-

y-

θy- θy+

θx−

θx+

12 o’clock direction

y+

θ

y+ = 90º

x+

θX+ = 90º

CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (8).

18 / 25

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

s

www.panelook.com

Issued Date: Jun, 10, 2010

Model No.: M185B3-PA1

Approval

Note (4) Definition of Response Time (TR, TF):

100%

90%

Optical

Response

10%

0%

Gray Level 255

T

R

66.67 m

Note (5) Definition of Transmittance (T%):

Module is without signal input.

Luminance of LCD module L(5)

Transmittance =

Luminance of backlight LBLU(5)

T

F

66.67 ms

Ϡ 100%

Gray Level 255

Time

L (X) and L

BLU(X)is corresponding to the luminance of the point X at Figure in Note (8).

Note (6) Measurement Setup:

The LCD module should be stabilized at given temperature for 20minutes to avoid abrupt

temperature change during measuring. In order to stabilize the luminance, the measurement

should be executed after lighting Backlight for 20minutes in a windless room.

LCD Module

LCD Panel

USB2000

Center of the Screen

CS-2000

Light Shield Room

(Ambient Luminance < 2 lux)

19 / 25

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Issued Date: Jun, 10, 2010

Model No.: M185B3-PA1

Approval

Note (7) : Measurement Setup:

The LCD Panel should be stabilized at given temperature for 30 minutes to avoid abrupt temperature

change during measuring. In order to stabilize the luminance, the measurement should be executed after

light source “C” for 30 minutes in a windless room.

DMS 803

Note (8) : Definition of Transmittance Variation (δT%):

Measure the transmittance at 9 points

Maximum [T%(1), T%(2), … T%(9)]

T% =

δ

Minimum [T%(1), T%(2), … T%(9)]

Horizontal Line

D

D/10

D/2

9D/10

W

W/10

W/2

1

4

2

5

3

X

6

: Test Point

X=1 to 9

Vertical Line

9W/10

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

7 8 9

Active Area

20 / 25

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

Issued Date: Jun, 10, 2010

www.panelook.com

Model No.: M185B3-PA1

Approval

8. PACKAGING

8.1 PACKING SPECIFICATIONS

(1) 27 open cells / 1 Box

(2) Box dimensions: 570 (L) X 450 (W) X 320 (H) mm

(3) Weight: approximately 19.1Kg (27 open cells per box)

8.2 PACKING METHOD

21 / 25

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

Issued Date: Jun, 10, 2010

www.panelook.com

Model No.: M185B3-PA1

Approval

9. DEFINITION OF LABELS

9.1 CMO OPEN CELL LABEL

The barcode nameplate is pasted on each OPEN CELL as illustration for CMO internal control.

M185B3 - PA1 RoHS Rev X.X

CMI53A1XXXXXLXXLYMDNNNN

Barcode definition:

Serial ID: CM

Code Meaning Description

CM Supplier code CMO=CM

I53A1 Model number M185B3-PA1=I53A1

X Revision code C1:1, C2:2, …

X Source driver IC code

X Gate driver IC code

XX Cell location Tainan, Taiwan=TN

L Cell line # 1,2,~,9,A,B,~,Y,Z

XX Module location Tainan, Taiwan=TN ; Ningbo China=NP

L Module line # 1,2,~,9,A,B,~,Y,Z

YMD Year, month, day

NNNN Serial number Manufacturing sequence of product

-I53A1-X-X-X-XX-L-XX-L-YMD-NNNN

Century=1, CLL=2, Demos=3, Epson=4, Fujitsu=5, Himax=6, Hitachi=7, Hynix=8, LDI=9, Matsushita=A, NEC=B, Novatek=C, OKI=D, Philips=E, Renasas=F, Samsung=G, Sanyo=H, Sharp=I, TI=J, Topro=K, Toshiba=L, Windbond=M

Year: 2001=1, 2002=2, 2003=3, 2004=4… Month: 1~12=1, 2, 3, ~, 9, A, B, C Day: 1~31= 1, 2, 3, ~, 9, A, B, C, ~, T, U, V

9.2 CARTON LABEL

The barcode nameplate is pasted on each box as illustration, and its definitions are as following explanation.

(a) Model Name: M185B3 -PA1

(b) Carton ID: CMO internal control

(c) Quantities: 27 pcs

M185B3 -PA1

M185B3-PA1

M185B3-PA1M185B3-PA1

27

22 / 25

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

Issued Date: Jun, 10, 2010

www.panelook.com

Model No.: M185B3-PA1

Approval

10. RELIABILITY TEST

Environment test conditions are listed as following table.

Items Required Condition Note

Temperature Humidity Bias (THB)

High Temperature Operation (HTO)

Low Temperature Operation (LTO)

High Temperature Storage (HTS)

Ta= 50к, 80%RH, 240hours

Ta= 50к, 50%RH , 240hours

Ta= 0к, 240hours

Ta= 60к, 240hours

(1)

Low Temperature Storage (LTS)

Package Vibration Test

Thermal Shock Test (TST)

On/Off Test

Altitude Test

Note (1) The tests are done with LCD modules (M185B3-LA1).

Note (2) The test is done with a package shown in Section 8.

Ta= -20к, 240hours

ISTA STANDARD

1.14Grms Random, Frequency Range: 1 ~ 200 Hz Top & Bottom: 30 minutes (+Z), 10 min (-Z), Right & Left: 10 minutes (X) Back & Forth 10 minutes (Y)

-20к/30min, 60к / 30min, 100 cycles

25к, On/10sec, Off /10sec, 30000 cycles

Operation: 10000 ft / 24hours Non-Operation: 30000 ft / 24hours

(2)

(1)

23 / 25

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

Issued Date: Jun, 10, 2010

www.panelook.com

Model No.: M185B3-PA1

Approval

11. PRECAUTIONS

11.1 ASSEMBLY AND HANDLING PRECAUTIONS

(1) Do not apply rough force such as bending or twisting to the product during assembly.

(2) To assemble backlight or install module into user’s system can be only in clean working areas. The dust

and oil may cause electrical short or worsen the polarizer.

(3) It is not permitted to have pressure or impulse on the module because the LCD panel will be damaged.

(4) Always follow the correct power sequence when the product is connecting and operating. This can prevent

damage to the CMOS LSI chips during latch-up.

(5) Do not pull the I/F connector in or out while the module is operating.

(6) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and easily

scratched.

(7) It is dangerous that moisture come into or contacted the product, because moisture may damage the

product when it is operating.

(8) High temperature or humidity may reduce the performance of module. Please store this product within the

specified storage conditions.

(9) When ambient temperature is lower than 10ºC may reduce the display quality. For example, the response

time will become slowly.

11.2 SAFETY PRECAUTIONS

(1) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In case of

contact with hands, skin or clothes, it has to be washed away thoroughly with soap.

(2) After the product’s end of life, it is not harmful in case of normal operation and storage.

11.3 OTHER

(1) When fixed patterns are displayed for a long time, remnant image is likely to occur.

12. MECHANICAL DRAWING

24 / 25

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Version 2.0

www.panelook.com

Global LCD Panel Exchange Center

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!