chiliGREEN B5130 User Manual

V10.1.00

Preface

Notice

The company reserves the right to revise this publication or to change its contents without notice. Information
contained herein is for reference only and does not constitute a commitment on the part of the manufacturer or
any subsequent vendor. They assume no responsibility or liability for any errors or inaccuracies that may appear
in this publication nor are they in anyway responsible for any loss or damage resulting from the use (or misuse)
of this publication.
This publication and any accompanying software may not, in whole or in part, be reproduced, translated, trans­mitted or reduced to any machine readable form without prior consent from the vendor, manufacturer or creators
of this publication, except for copies kept by the user for backup purposes.
Brand and product names mentioned in this publication may or may not be copyrights and/or registered trade­marks of their respective companies. They are mentioned for identification purposes only and are not intended
as an endorsement of that product or its manufacturer.
©August 2010

Trademarks

Intel, Pentium and Intel Core are trademarks/registered trademarks of Intel Corporation.

I

Preface

R&TTE Directive

This device is in compliance with the essential requirements and other relevant provisions of the R&TTE Direc­tive 1999/5/EC.

This device will be sold in the following EEA countries: Austria, Italy, Belgium, Liechtenstein, Denmark, Lux­embourg, Finland, Netherlands, France, Norway, Germany, Portugal, Greece, Spain, Iceland, Sweden, Ireland,
United Kingdom, Cyprus, Czech Republic, Estonia, Hungary, Latvia, Lithuania, Malta, Slovakia, Poland, Slov­enia.

CE Marking

This device has been tested to and conforms to the regulatory requirements of the European Union and has at­tained CE Marking. The CE Mark is a conformity marking consisting of the letters “CE”. The CE Mark applies
to products regulated by certain European health, safety and environmental protection legislation. The CE Mark
is obligatory for products it applies to: the manufacturer affixes the marking in order to be allowed to sell his
product in the European market.

This product conforms to the essential requirements of the R&TTE directive 1999/5/EC in order to attain CE
Marking. A notified body has determined that this device has properly demonstrated that the requirements of the
directive have been met and has issued a favorable certificate of expert opinion. As such the device will bear the
notified body number 0560 after the CE mark.

The CE Marking is not a quality mark. Foremost, it refers to the safety rather than to the quality of a product.
Secondly, CE Marking is mandatory for the product it applies to, whereas most q uality marking s are vo lu ntary.

II

Preface

FCC Statement

(Federal Communications Commission)

You are cautioned that changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not in­stalled and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Re orient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the service representative or an experienc ed radio/TV technician for help.

Operation is subject to the following two conditions:

1. This device may not cause interference.
And

2. This device must accept any interference, including interfer ence that may cause undesired operation of the

device.

III

Preface



Warning

Use only shielded cables to connect I/O devices to this equipment. You are cautioned that changes or modifications not ex­pressly approved by the manufacturer for compliance with the above standard s could void your authority to operate the
equipment.

If your purchase option includes both Wireless LAN and 3.75G modules, then the appropriate antennas will be installed.
Note that In order to comply with FCC RF exposure compliance requirements, the antenna must not be co-located or operate
in conjunction with any other antenna or transmitter.

Important Notice - 3.75G/HSPA & Bluetooth/Wireless LAN Modules

In order to comply with FCC regulations you should NOT operate the 3.75G/HSPA module and the Bluetooth/Wireless LAN
modules at the same time as this may disrupt radio frequency, and cause interference. When the 3.75G/HSPA module is
powered on, make sure that the Bluetooth/Wireless LAN modules are powered off.

FCC RF Radiation Exposure Statement:

1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This

equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator
and your body.

IV

Preface

IMPORTANT SAFETY INSTRUCTIONS

Follow basic safety precautions, including those listed below, to reduce the risk of fire, electric shock, and injury
to persons when using any electrical equipment:

1. Do not use this product near water, for example n ear a ba th tub, wash bowl, kitchen sink or laundry tu b, in a wet

basement or near a swimming pool.

2. Avoid using this equipment with a telephone line (other than a cordless type) during an electrical storm. There

may be a remote risk of electrical shock from lightning.

3. Do not use the telephone to report a gas leak in the vicinity of the leak.

4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may

explode. Check with local codes for possible special disposal instructions.

5. This product is intended to be supplied by a Listed Power Unit with an AC Input of 100 - 240V, 50 - 60Hz, DC

Output of 19V, 4.74A (90 Watts) minimum AC/DC Adapter.

This Computer’s Optical Device is a Laser Class 1 Product

V

Preface

Instructions for Care and Operation

The notebook computer is quite rugged, but it can be damaged. To prevent this, follow these suggestions:

1. Don’t drop it, or expose it to shock. If the computer falls, the case and the components could be damaged.

Do not expose the computer
to any shock or vibration.

Do not place it on an unstable
surface.

Do not place anything heavy
on the computer.

2. Keep it dry, and don’t overheat it. Keep the computer and power supply away from any kind of heating ele-

ment. This is an electrical appliance. If water or any other liquid gets into it, the computer could be badly dam­aged.

Do not expose it to excessive
heat or direct sunlight.

Do not leave it in a place
where foreign matter or mois­ture may affect the system.

Don’t use or store the com­puter in a humid environment.

Do not place the computer on
any surface that will block the
Vents/Fan Intakes.

VI

Preface

3. Avoid interference. Keep the computer away from high capacity transformers, electric motors, and other

strong magnetic fields. These can hinder proper performance and damage your data.

4. Follow the proper workin g procedu res for t he computer. Shut the computer down properly and don’t forget

to save your work. Remember to periodically save your data as data may be lost if the battery is depleted.

Do not turn off the power
until you properly shut down
all programs.

Do not turn off any peripheral
devices when the computer is
on.

5. Take care when using peripheral devices.

Use only approved brands of
peripherals.

Do not disassemble the com­puter by yourself.

Unplug the power cord befor e
attaching peripheral devices.

Perform routine maintenance
on your computer.

VII

Preface



Power Safety

Warning

Before you undertake
any upgrade proce­dures, make sure that
you have turned off the
power, and discon­nected all peripherals
and cables (including
telephone lines). It is
advisable to also re­move your battery in
order to prevent acci­dentally turning the
machine on.

Power Safety

The computer has specific power requirements:

• Only use a power adapter approved for use with this computer.

• Your AC/DC adapter may be designed for international travel but it still requires a steady,
uninterrupted power supply. If you are unsure of your local power specifications, consult
your service representative or local power company .

• The power adapter may have either a 2-pr ong or a 3-prong ground ed plug. The third prong
is an important safety feature; do not defeat its purpose. If you do not have access to a
compatible outlet, have a qualified electrician install one.

• When you want to unplug the power cord, be su re to disconnect it by the plug head, not by
its wire.

• Make sure the socket and any extension cord(s) you use can support the total current load
of all the connected devices.

• Before cleaning the computer, make sure it is disconnected from any external power sup­plies (i.e. AC/DC adapter or car adapter).

Do not plug in the power
cord if you are wet.

Do not use the power cord if
it is broken.

Do not place heavy objects
on the power cord.

VIII

Preface

Polymer Battery Precautions

Note the following information which is specific to polymer batteries only, and where applicable, this overrides
the general battery precaution information overleaf.

• Polymer batteries may experience a slight expansion or swelling, however this is part of the battery’s safety mecha­nism and is not a cause for concern.

• Use proper handling procedures when using polymer batteries. Do not use polymer batteries in high ambient tempera­ture environments, and do not store unused batteries for extended periods.

See also the general battery precautionary information overleaf for further information.

IX

Preface



Battery Disposal & Caution

The product that you have purchased contains a rechargeable battery. The battery is recyclable. At the end of its useful life,
under various state and local laws, it may be illegal to dispose of this battery in to the municipal waste stream. Check with
your local solid waste officials for details in your area for recycling options or proper disposal.

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalen t type recommended by the
manufacturer. Discard used battery according to the manufacturer’s instructions.

Battery Precautions

• Only use batteries designed for this computer. The wrong battery type may explode, leak or damage the computer.

• Do not remove any batteries from the computer while it is powered on.

• Do not continue to use a battery that has been dropped, or that appears damaged (e.g. bent or twisted) in any way. Even
if the computer continues to work with a damaged battery in place, it may cause circuit damage, which may possibly
result in fire.

• If you do not use the battery for an extended period, then remove the battery from the computer for storage.

• Recharge the batteries using the notebook’s system. Incorrect recharging may make the battery explode.

• Do not try to repair a battery pack. Refer any battery pack repa ir or replacemen t to you r service repre sentati ve or qu al­ified service personnel.

• Keep children away from, and promptly dispose of a damaged battery. Always dispose of batteries carefully. Batteries
may explode or leak if exposed to fire, or improperly handled or discarded.

• Keep the battery away from metal appliances.

• Affix tape to the battery contacts before disposing of the battery.

• Do not touch the battery contacts with your hands or metal objects.

X

Cleaning



Removal Warning

When removing any cover(s) and screw(s) for the purposes of device upg rade, remember to replace the cover(s) and
screw(s) before turning the computer on.

Do not apply cleaner directly to the computer; use a soft clean cloth.
Do not use volatile (petroleum distillates) or abrasive cleaners on any part of the computer.

Servicing

Do not attempt to service the computer yourself. Doing so may violate your warranty and expose you and the
computer to electric shock. Refer all servicing to authorized service personnel. Unplug the computer from the
power supply. Then refer servicing to qualified service personnel under any of the following conditions:

• When the power cord or AC/DC adapter is damaged or frayed.

• If the computer has been exposed to rain or other liquids.

• If the computer does not work normally when you follow the operating instructions.

• If the computer has been dropped or damaged (do not touch the poisonous liquid if the LCD panel breaks).

• If there is an unusual odor, heat or smoke coming from your computer.

Preface

XI

Preface



Power Off Before Traveling

Make sure that your notebook is completely powered off before putting it into a travel bag (or any such container). Putting a
notebook which is powered on in a travel bag may cause the vent(s)/fan intake(s)/outlet(s) to be blocked. To prev ent your
computer from overheating make sure nothing blocks the vent(s)/fan intake(s)/outlet(s) while the computer is in use.

Travel Considerations

Packing

As you get ready for your trip, run through this list to make sure the system is ready to go:

1. Check that the battery pack and any spares are fully charged.

2. Power off the computer and peripherals.

3. Close the display panel and make sure it’s latched.

4. Disconnect the AC/DC adapter and cables. Stow them in the carrying bag.

5. The AC/DC adapter uses volt ages from 100 to 240 volt s so you won’t need a second volt age adapter. However,

check with your travel agent to see if you need any socket adapters.

6. Put the notebook in its carrying bag and secure it with the bag’s straps.

7. If you’re taking any perip herals (e.g. a printer, mouse or digital camera), pack them and those devices’ adapters

and/or cables.

8. Anticipate customs - Some jurisdictions may have import restrictions or req uire proof of ownersh ip for both hard -

ware and software. Make sure your documents are prepared.

XII

Preface

On the Road

In addition to the general safety and maintenance suggestions in this preface, and Chapter 8: Troubleshooting,
keep these points in mind:

Hand-carry the notebook - For security, don’t let it out of your sight. In some areas, computer theft is very
common. Don’t check it with normal luggage. Baggage handlers may not be sufficiently careful. Avoid knock­ing the computer against hard objects.

Beware of Electromagnetic fields - Devices such as metal detectors & X-ray machines can damage the com­puter, hard disk, floppy disks, and other media. They may also destroy any stored data - Pass your computer and
disks around the devices. Ask security officials to hand-inspect them (you may be asked to turn it on). Note:
Some airports also scan luggage with these devices.

Fly safely - Most airlines have regulations about the use of computers and other electronic devices in flight.
These restrictions are for your safety, follow them. If you stow the notebook in an overhead compartment, make
sure it’s secure. Contents may shift and/or fall out when the compartment is opened.

Get power where you can - If an electrical outlet is available, use the AC/DC adapter and keep your battery(ies)
charged.

Keep it dry - If you move quickly from a cold to a warm location, water vapor can condense inside the computer.
Wait a few minutes before turning it on so that any moisture can evaporate.

XIII

Preface

Developing Good Work Habits

Developing good work habits is important if you need to work in fron t of the computer for long periods of time.
Improper work habits can result in discomfort or serious injury from repetitive strain to your hands, wrists or
other joints. The following are some tips to reduce the strain:

• Adjust the height of the chair and/or desk so that the keyboard is at or slightly below the
level of your elbow. Keep your forearms, wrists, and hands in a relaxed position.

• Your knees should be slightly higher than your hips. Place your feet flat on the floor or on
a footrest if necessary.

• Use a chair with a back and adjust it to support your lower back comfortably.

• Sit straight so that your knees, hips and elbows form approximately 90-degree angles
when you are working.

• Take periodic breaks if you are using the computer for long periods of time.

Remember to:

• Alter your posture frequently.

• Stretch and exercise your body several times a day.

• Take periodic breaks when you work at the computer for long periods of time. Frequent
and short breaks are better than fewer and longer breaks.

XIV

Preface

Lighting

Proper lighting and comfortable display viewing angle can reduce eye strain and muscle fatigue in your neck and
shoulders.

• Position the display to avoid glare or reflections from overhead lighting or outside sources of light.

• Keep the display screen clean and set the brightness and contrast to levels that allow you to see the screen clearly.

• Position the display directly in front of you at a comfortable viewing distance.

• Adjust the display-viewing angle to find the best position.

LCD Screen Care

To prevent image persistence on LCD monitors (caused by the continuous display of graphics on the screen for
an extended period of time) take the following precautions:

• Set the Windows Power Plans to turn the screen off after a few minutes of screen idle time.

• Use a rotating, moving or blank screen saver (this prevents an image from being displayed too long ).

• Rotate desktop background images every few days.

• Turn the monitor off when the system is not in use.

XV

Preface

XVI

Contents

Notice .................................................................................I

FCC Statement ................................................................III

FCC RF Radiation Exposure Statement: ........................IV

Instructions for Care and Operation ...............................VI

Power Safety ................................................................ VIII

Polymer Battery Precautions ..........................................IX

Battery Precautions ...................................................... ....X

Cleaning .......................................................................... XI

Servicing .........................................................................XI

Travel Considerations ....................................................XII

Quick Start Guide

Overview ........................................................................1-1

Advanced Users .............................................................1-2

Beginners and Not-So-Advanced Users ........................1-2

Warning Boxes ................................................ ..............1-2

Not Included ..................................................................1-3

System Startup ...............................................................1-4

System Software ................... .... .....................................1-5

Model Differences .........................................................1-6

System Map: LCD Panel Open - Model A ....................1-7

System Map: LCD Panel Open - Model B ....................1-8

LED Indicators ............................................. .... ..............1-9

Preface

Hot Key Buttons & Keyboard .....................................1-10

Keyboard ......................................................................1-11

Function/Hot Key Indicators .......................................1-12

System Map: Front & Left Views ................................1-13

System Map: Right & Rear Views ..............................1-14

System Map: Bottom View - Model A ........................1-15

System Map: Bottom View - Model B .............. .... ... ...1-16

3.75G/HSPA Module USIM Card Installation ............1-17

Video Features .............................................................1-19

NVIDIA® Optimus™ Technology .............................1-19

Power Options ........................................ .... ..................1-23

MOFA LCD Back Covers - Model A ..........................1-24

Features & Components

Overview ........................................................................2-1

Hard Disk Drive .............................................................2-2

Optical (CD/DVD) Device ............................................2-3

Loading Discs ................................................................2-3

Handling CDs or DVDs .................................................2-4

DVD Regional Codes ................................................... .2-5

Multi-In-1 Card Reader .................................................2-6

Touchpad and Buttons/Mouse .......................................2-7

Gestures and Device Settings ........................................2-8

XVII

Preface

Audio Features .............................................................2-11

Adding a Printer ...........................................................2-13

USB Printer ..................................................................2-13

Parallel Printer .............................................................2-13

Power Management

Overview ........................................................................3-1

The Power Sources ...................................... .... ..............3-2

AC/DC Adapter .............................................................3-2

Battery ............................................................................3-2

Turning On the Computer ..............................................3-3

Power Plans ...................................................................3-4

Power-Saving States ......................................................3-7

Sleep ..............................................................................3-7

Hibernate ........................................................................3-8

Shut down ......................................................................3-8

Configuring the Power Buttons .....................................3-9

Resuming Operation ....................................................3-10

Energy Star Power Saving ...........................................3-11

Battery Information .....................................................3-12

Conserving Battery Power ...........................................3-13

Battery Life .......................................................... ........3-14

New Battery .................................................................3-14

Recharging the Battery with the AC/DC Adapter .......3-14

Proper handling of the Battery Pack ............................3-15

Battery FAQ .................................................................3-16

Drivers & Utilities

What to Install ........................................................... .....4-1

Module Driver Installation .............................................4 -1

Windows 7 Driver Installation .......................................4-2

Updating/Reinstalling Individual Drivers ......................4-4

User Account Control ....................................................4-5

Windows Security Message ...........................................4-5

New Hardware Found ....................................................4-5

Driver Installation Procedure ......................................... 4-6

Chipset ...........................................................................4-6

Video (VGA) .................................................................4-6

NVIDIA Video (VGA) ...................... .... .... .... .... .... ........4-6

MEI Driver .....................................................................4-6

LAN ...............................................................................4-6

CardReader ....................................................................4-6

Touchpad .......................................................................4-7

Hot Key ..........................................................................4-7

USB 3.0 ..........................................................................4-7

Audio .............................................................................4-7

Windows Experience Index ...........................................4-8

Optional Drivers ............................................................4-9

PC Camera Module ......................................................4-10

Wireless LAN Module .................................................4-10

XVIII

Preface

3.75G/HSPA Module ...................................................4-10

BIOS Utilities

Overview ........................................................................5-1

The Power-On Self Test (POST) ................................... 5-2

Failing the POST ...........................................................5-3

Fatal Errors ....................................................................5-3

Non-Fatal Errors ............................................................5-3

The Setup Utility ............................................................5-4

Entering Setup ...............................................................5-4

Setup Screens .................................................................5-5

Main Menu .....................................................................5-6

System Time & Date (Main Menu) ...............................5-6

SATA Port 1/2/3 (Main Menu) ......................................5-7

System/Extended Memory (Main Menu) ......................5-7

BIOS Revision/KBC/

EC Firmware Revision (Main Menu) ............................5-7

GPU Card/GPU VBIOS Revision/

GPU VBIOS Build Date (Main Menu) .........................5-7

Advanced Menu .............................................................5-8

Advanced Chipset Control (Advanced Menu) ..............5-8

On Board JMicron Power Saving (Advanced Menu >

Advanced Chipset Control) ...........................................5-9

Total Graphics Memory (Advanced Menu >

Advanced Chipset Control) ...........................................5-9

Bluetooth Power Setting (Advanced Menu >

Advanced Chipset Control) ...........................................5-9

SATA Mode (Advanced Menu) ....................................5-9

Legacy USB Support: (Advanced Menu) ....................5-10

Boot-time Diagnostic Screen (Advanced Menu) .........5-10

Legacy OS Boot: (Advanced Menu) ...........................5-10

Power on Boot Beep (Advanced Menu) ......................5-10

Battery Low Alarm Beep (Advanced Menu) ...............5-10

Security Menu ..............................................................5-11

Set Supervisor Password (Security Menu) ..................5-11

Set User Password (Security Menu) ............................5-12

Password on boot: (Security Menu) .............................5-12

Boot Menu ...................................................................5-13

Exit Menu ....................................................................5-14

Upgrading The Computer

Overview ........................................................................6-1

When Not to Upgrade ....................................................6-2

Removing the Battery ....................................................6-3

Upgrading the Hard Disk Drive .....................................6-4

Upgrading the Optical (CD/DVD) Device ....................6-7

Upgrading the System Memory (RAM) ........................6-9

Changing the Optional LCD Back Covers ..................6-12

XIX

Preface

Modules & Options

Overview ........................................................................7-1

PC Camera Module ........................................................7-2

PC Camera Driver Installation .......................................7-3

Wireless LAN Module .................................................7-10

802.11b/g/n Driver Installation ....................................7-11

Intel® Wi-Fi Link Series Driver Installation ...............7-11

Connecting to a Wireless Network in Windows 7 .......7-12

Intel® My WiFi Configuration ....................................7-15

Windows Mobility Center ...........................................7-27

3.75G/HSPA Module ...................................................7-28

Mobile Partner .............................................................7-31

Mobile Partner Application Installation ......................7-31

Mobile Partner Application .........................................7-32

Profile Management .....................................................7-32

Text Messaging Service ...............................................7-36

BandLuxe HSDPA Utility ...........................................7-37

BandLuxe HSDPA Utility Installation ........................7-37

BandLuxe HSDPA - Connection Manager ..................7-38

Creating a Profile .........................................................7-41

Choosing a Profile .......................................................7-44

Editing a Profile ...........................................................7-45

Text Messaging Service (SMS) ...................................7-46

Setting ..........................................................................7-49

Statistics & Information ...............................................7-55

Fingerprint Reader Module ..........................................7-56

Fingerprint Reader Driver Installation .........................7-57

User Enrollment ...........................................................7-58

Fingerprint Control Center Features ............................7-60

Bluetooth Module ........................................................7-61

Bluetooth Combo Driver Installation ..........................7-62

Bluetooth & WLAN Combo Settings ..........................7-63

Bluetooth Networking Setup .......................................7-66

Bluetooth & WLAN Combo Module Configuration ...7-67

Troubleshooting

Overview ........................................................................8-1

Basic Hints and Tips ......................................................8-2

Backup and General Maintenance .................................8-3

Viruses ...........................................................................8-4

Upgrading and Adding New Hardware/Software .......... 8-5

Problems and Possible Solutions ...................................8-7

Bluetooth Connection Problems ..................................8-13

Wake On LAN Setup ...................................................8-17

Interface (Ports & Jacks)

Overview .......................................................................A-1

Notebook Ports and Jacks .............................................A-2

XX

Preface

Video Driver Controls

Video Driver Installation ..............................................B-2

Video (VGA) ................................................................B-2

NVIDIA Video (VGA) .................................................B-2

NVIDIA® Optimus™ Technology ..............................B -3

Dynamic Video Memory Technology ......................B-6

Intel® Graphics & Media Control Panel ...................... B-7

Display Devices & Options ...................................... B-9

Attaching Other Displays ...........................................B-10

Configuring an External Display in Windows 7 .........B-12

HDMI Audio Configuration .......................................B-15

NVIDIA Control Panel ...............................................B-18

Optimus™ Customization Options .............................B-20

Set PhysX® Configuration .........................................B-24

Video Settings .............................................................B-25

Specifications

Processor .......................................................................C-2

Processor .......................................................................C-2

Processor .......................................................................C-2

Core Logic ................................ ....................................C-3

Display .......................................................................... C-3

Memory .........................................................................C-3

Video .............................................................................C-3

BIOS .............................................................................C-3

Storage ..........................................................................C-3

Audio ............................................................................C-3

Keyboard, Pointing Device & Buttons ......................... C-4

Interface ........................................................................C-4

Card Reader ..................................................................C-4

Slots ..............................................................................C-4

Communication .............................................................C-4

Communication (Cont’d) ..............................................C-5

Power Management ......................................................C-5

Power ............................................................................C-5

Security ......................................................................... C-5

Operating System ..........................................................C-5

Design Feature ..............................................................C-5

Environmental Spec ......................................................C-5

Dimensions & Weight ..................................................C-5

XXI

Preface

XXII

Quick Start Guide

Chapter 1: Quick Start Guide

Overview

This Quick Start Guide is a brief introduction to the basic features of your computer, to navigating around the
computer and to getting your system started. The remainder of the manual covers the following:

• Chapter 2 A guide to using some of the main features of the computer e.g. the storage devices (hard disk,
optical device, card reader), Touchpad & Mouse, Audio & Printer.

• Chapter 3 The computer’s power saving options.

• Chapter 4 The installation of the drivers and utilities essential to the operation or improvement of some of the
computer’s subsystems.

• Chapter 5 An outline of the computer’s built-in software or BIOS (Basic Input Output System).

• Chapter 6 Instructions for upgrading your computer.

• Chapter 7 A quick guide to the computer’s PC Camera, Wireless LAN, 3.75G/HSPA, Bluetooth, and Fin-
gerprint modules (some of which may be optional depending on your purchase configuration).

• Chapter 8 A troubleshooting guide.

• Appendix A Definitions of the interface, ports/jacks which allow your computer to communicate with external
devices.

• Appendix B Information on the video driver controls.

• Appendix C The computer’s specification.

1

Overview 1 - 1

1



Notes

Check the light colored
boxes with the mark
above to find detailed in­formation about the com­puter’s features.

Quick Start Guide

Advanced Users

If you are an advanced user you may skip over most of this Quick Start Guide. However you may find it useful
to refer to “What to Install” on page 4 - 1, “BIOS Utilities” on page 5 - 1 and “Upgrading The Computer” on

page 6 - 1 in the reminder of the User’s Manual. You may also find the notes marked with a

 of interest to you.

Beginners and Not-So-Advanced Users

If you are new to computers (or do not have an advanced knowledge of them) then
the information contained in the Quick Start Guide should be enough to get you up
and running. Eventually you should try to look through all the documentation (more
detailed descriptions of the functions, setup and system controls are covered in the
remainder of the User’s Manual), but do not worry if you do not understand every­thing the first time. Keep this manual nearby and refer to it to learn as you go. You
may find it useful to refer to the notes marked with a

 as indicated in the margin.

For a more detailed description of any of the interface ports and jacks see “Interface

(Ports & Jacks)” on page A - 1.

Warning Boxes

No matter what your level please pay careful attention to the warning and safety information indicated by the

 symbol. Also please note the safety and handling instructions as indicated in the Preface.

1 - 2 Overview

Quick Start Guide



Drivers

If you are installing new system software, or are re-configuring your computer for a different system, you will need to install
the drivers listed in “Drivers & Utilities” on page 4 - 1. Drivers are programs which act as an interface between the com­puter and a hardware component e.g. a wireless network module. It is very important that you install the drivers in the order
listed. You will be unable to use most advanced controls until the necessary drivers and utilities are properly installed. If
your system hasn’t been properly configured (your service representative may have already done that for you); refer to

Chapter 4 for installation instructions.

Ports and Jacks

See “Notebook Ports and Jacks” on page A - 2 for a description of the interface (ports & jacks) which allow your com­puter to communicate with external devices, connect to the internet etc.

Not Included

Operating Systems (e.g. Windows 7) and applications (e.g. word processing, spreadsheet and database programs)
have their own manuals, so please consult the appropriate manuals.

1

Overview 1 - 3

1



Shutdown

Note that you should always shut your computer down by choosing the Shut Down command from the bottom right of the
Start menu in Windows. This will help prevent hard disk or system problems.

Quick Start Guide

System Startup

1. Remove all packing materials.

2. Place the computer on a stable surface.

3. Securely attach any peripherals you want to use with the notebook (e.g. keyboard and mouse) to their ports.

4. Attach the AC/DC adapter to the DC-In jack at the rear of the computer, then plug the AC power cord into an

outlet, and connect the AC power cord to the AC/DC adapter.

5. Use one hand to raise the

hand (as illustrated in Figure 1 - 1 below) to support the base of the computer (Note: Never lift the computer by
the lid/LCD).

lid/LCD to a comfortable viewing angle (

do not exceed 120 degrees

);

use the other

Figure 1 - 1 - Opening the Lid/LCD & Computer with AC/DC Adapter Plugged-In

1 - 4 System Startup

Quick Start Guide



Windows OS

In order to run Windows 7 without limitations or decreased performance, your computer requires a minimum 1GB of sys­tem memory (RAM), however if you are running Windows 7 64 bit your computer requires a minimum 2GB of system
memory (RAM).

System Software

Your computer may already come with system software pre-installed. Where this is not the case, or where you
are re-configuring your computer for a different system, you will find that this manual refers to the Windows 7
operating system.

1

System Startup 1 - 5

1

Quick Start Guide

Model Differences

This notebook series includes two different model types that mainly differ as indicated in the table below. Note that
your model may appear slightly different from those pictured in this manual.

Feature Model A Model B

Display Type Supported

MOFA LCD Back Cover Factory Option N/A

3.75G Module

Fingerprint Module Factory Option N/A

Dimensions & Weight

15.6” (39.62cm) HD (1366 * 768) / HD+ (1600 *

900) / FHD (1920 * 1080) 16:9 LCD Panel

UMTS/HSPDA-based 3.75G Module

with USB Mini-Card Interface

(Factory Option)

374mm(w) * 250mm(d) * 25-37.2mm(h)

2.6 kg with ODD & 48.84WH Battery

17.3” (43.94cm) HD+ (1600 * 900) / FHD (1920 *

413mm(w) * 277.5mm(d) * 25.1-38.9mm(h) -

3.1 kg with ODD & 48.84WH Battery

Table 1 - 1 - Model Differences

1 - 6 Model Differences

1080) 16:9 LCD Panel

N/A

w/o MOFA