CHIEF PAC390 User Manual

INSTALLATION INSTRUCTIONS

PAC-390

CUBE WALL HANGER ACCESSORY

Prior to assembly, unpack carton completely and verify contents.

If you are missing any of the following components, please contact Customer Service at 1-800/582-6480

(2) BRACKET, Front (4) WASHER, 1/4” Flat
(2) BRACKET, Front (4) WASHER, 5/16” Flat
(4) BOLT, 1/4”-20 (4) WASHER, 5/16” Lock
(4) BOLT, 5/16”-18 Carriage (4) NUT, 5/16”-18

BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY

CAUTION!

1. Using two ¼”-20 bolts and flat washers , attach a rear bracket to a front bracket (see Figure 2). Repeat for this

process for remaining brackets.

Figure 1

LARGE FLAT SCREEN DISPLAYS ARE EXTREMELY
FRAGILE.

Figure 2

8800-000047 11/05/04

CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: [phone], Email: [e-mail]

2. Attach wall mount to hangers using four 5/16”-18 carriage bolts, four flat washers, four lock washers,

and four lock nuts (see Figure 3).

Figure 3

3. Place hanger, with mount, over cube wall.

4. Adjust top plate to width of cube wall (see Figure 4).

Figure 4

5. Install display/PSB assembly on mount.

8800-000047 11/05/04

CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: [phone], Email: [e-mail]