CHIEF NS1S12-20-28-36-41 User Manual
INSTALLATION INSTRUCTIONS
NS1S12/20/28/36/41 Side Panels
The NS1S side panels are designed for use with Chief® Raxxess S1 Ser ies racks. See the specific installation instructions provided with the
rack for additional installation information.
TOOLS REQUIRED / PARTS INCLUDED
B (4)
A (1)
5/32 " [security]
(included)
[Side panel]
WARNING: FAILURE TO READ, THOROUGHLY UNDERSTAND, AND FOLLOW ALL INSTRUCTIONS CAN RESULT IN SERIOUS
PERSONAL INJURY, DAMAGE TO EQUIPMENT, OR VOIDING OF FACTORY WARRANTY! It is the installer’s responsibility to make
sure all components are properly assembled and installed usi ng the instructions provided.
IMPORTANT ! : If installing doors (not included) and side panels on an S1 rack, the doors must be installed before installing
the side panels.
1/4-20 x 1-1/4"
C (1)
5/32"
[security]
NS1S Side Panels Installation
1. Align two bottom ta bs in side panel (A) with slots in S1 rack. (See
Figure 1)
(A)
S1 rack
2
(NS1S1223 rack shown)
Figure 1
2. Attach side panel ( A) to S1 rack wit h four 1/4-20 x 1- 1/4" security
buttonhead cap screws (B). (See Figure 2)
Milestone AV Technologies, and its affiliated co rpo rat ions a nd s ubs id iaries (collectively, "Milestone"), intend to mak e th is ma nual ac curate and complete. However, Milestone mak es
no claim that the information contained h erein co vers all details, conditions or variations, nor does it provide for every pos sible contingency in connection with the installation or use
of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or
implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.
(NS1S1223 rack shown)
Figure 2
3. Tighten four screws (B) usi ng the 5/32 " securi ty hex wren ch (C) .
4. Attach additional side panels as required.
®Chief is a registered trademark of Milestone AV Technologies. All rights reserved.
(A)
(B) x 4
Chief Manufacturing, a products division of Milestone AV Technologies
8401 Eagle Creek Parkway, Savage, MN 55378
• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918
©2011 Mileston e AV Technolog ies,
8821-0 02 01 7 R ev 01
a Duchossois Gr oup Company
01/11
Loading...