Chief HB106E Installation Guide

INSTALLATION INSTRUCTIONS

MODEL: HB-106E Custom Projector Br acket

Unpack carton and verify contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.

PARTS

(1) BRACKET, Custom HB (4) WA S HER, Flat, M 6
(4) NUT, Flange, Hex, 5/16-18 (4) SCREW, Phillips Pan Head, M6 x 12mm

2

x 4

1

Figure 1

INSTALLATION

WARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL INJURY! All components must b e securely fastened

to each other and to the ceiling, and the ceiling must be capable of supporting five times the total weight of the installation.

1. Lower custom HB bracket onto top of projector. Ensure that triangle in bracket points toward front of projector. (See Figure 1)

2. Attach HB bracket to projector using four M6 x 12mm Phillips pan head screws through four holes in the HB bracket. (See Figure 1)

Continued. . .

Milestone AV Technologies, Inc., and its affiliated corporati ons and subs idiaries ( collectively, "Milestone"), intend t o make this ma nual accur ate and complet e. However, Mileston e

makes no claim that the information contained herein co vers all details, conditions or vari ati ons, nor does it provide for every pos sible c ontingency in connection with th e i nsta llation
or use of this prod uct. The i nfor mation c ontained in this doc umen t is subje ct t o change without noti ce or obl igat ion of any k ind. Milestone m ake s no repr esentati on of warran ty, ex­pressed or implied, regarding the i nformation conta ined herein. Mi lestone assume s no responsibility for accuracy, completeness or sufficiency of t he information contai ned in this
document.

Chief, a products division of Milestone AV Technologies

6436 City West Parkway, Eden Prairie, MN 55344

• P: 800.582.6480 / 952.225.6000 • F:877.894.6918 / 952.894.6918

©2016 Milestone AV Technologies

8800-0 02 93 6 R ev 00

www.milestone.com

12/16

INSTALLATION INSTRUCTIONS

Continued . .

CAUTION: Installing a ceiling mount requires the presence of two persons familiar with mechanical installations. A third assistant is

recommended.

VCM Housing

5

x 4

Seat VCM in HB
bracket slots

4

Figure 2

3. Attach VCM housing to your method of support and tighten firmly so the VCM housing is square to the screen.

4. With help of assist ant s, l ift the projector and inst all it to t he fo ur st uds extending from the VCM hous ing . Ensur e that t he V CM housing is
seated in slots on HB bracket. (See Figure 2)

5. Tighten the four 5/16" flange nuts. (See Figure 2)