Chicago Electric 90981 User Manual

VACUUM/BLOWER

WET AND DRY-2.2 GAL.

90981

OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our W eb site at http://www.harborfreight.com

Copyright © 2003 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.

For technical questions and replacement parts, please call 1-800-444-3353

Specification

ITEM

Electrical Requirements

Holding Capacity
Flex Hose Dimensions
Overall Dimensions
Weight

120V / 60 Hz

1.5 Peak Horsepower
Double Insulated, Fan Cooled Motor

2.2 Gallons
1-5/8” diameter X 56-3/4” Long
11-1/4”W X 14-1/4”L X 14-3/4”H

7.0 Lbs.

DESCRIPTION

Warning: For Indoor Use Only

Save This Manual

You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. K eep
your invoice with this man ual. Write the invoice number on the inside of the front
cover . K eep the manual and in v oice in a safe and dry place for future reference.

Safety Warnings and Precautions

WARNING: When using this product, basic safety precautions should always
be followed to reduce the risk of personal injury and damage to equipment.

Read all instructions before using this product!

1. Keep work area clean. Cluttered areas invite injuries.

2. Keep children away. Do not allow children to use this product. The Vacuum/
Blower is not a toy.

3. Store idle equipment. When not in use, keep this product in a dry location to
inhibit rust. Alwa ys lock up tools and equipment and keep out of reach of
children.

4. Do not use this product if under the influence of alcohol or drugs. Read
warning labels on prescriptions to determine if your judgment or reflexes are
impaired while taking drugs. If there is any doubt, do not attempt to use this
product.

5. Dress properly. Do not wear loose clothing or jewelry as they can be caught
in moving parts. Nonskid f ootw ear are recommended when working. Wear
restrictive hair covering to contain long hair .

6. Maintain this product with care. Keep tools clean and dry for better
performance.

SKU 90981 Page 2

7. Do not overreach. Keep proper footing and balance at all times.

8. Always use protection. W ear ANSI appro v ed saf ety impact e ye glasses
when using this product. ANSI appro v ed saf ety impact e y e glasses are
available from Harbor Freight Tools.

9. When necessary , use hearing and breathing protection. W ear ANSI
approved hearing protectors when using the Vacuum/Blower f or e xtended
time periods or using it in a noisy work area. F or dusty oper ations , wear an
ANSI approved dust mask. ANSI approved hearing protectors and ANSI
approved dust masks are a vailab le from Harbor Freight Tools.

10. Industrial Applications must follow OSHA requirements.

11. Stay Alert. Watc h what y ou are doing at all times. Use common sense.

Do not use this product when you are tired or distracted from the job at
hand.

12. Check for damaged parts. Bef ore using an y tool, an y part that appears
damaged should be carefully checked to determine that it will operate
properly and perform its intended function. Chec k f or damaged parts and any
other condition that may affect proper oper ation. Any part that is damaged
should be properly repaired or replaced by a qualified technician. Do not use
the tool if any switch does not turn On and Off properly.

13. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use
accessories intended for use with this tool. Appro v ed accessories are
available from Harbor Freight Tools.

14. Use proper size and type extension cord. If an extension cord is required,
it must be of the proper size and type to supply the correct current to the tool
without heating up. Otherwise, the extension cord could melt and catch fire, or
cause electrical damage to the tool.

15. Maintenance. F or y our safety, maintenance should be performed regularly
by a qualified technician.

16. Use the right tool for the job. Do not attempt to f orce a small tool or
attachment to do the work of a larger industrial tool. There are certain
applications for which this tool was designed. Do not modify this tool and do
not use this tool for a purpose for which it was not intended.

SKU 90981 Page 3