Congratulations on your purchase of a Chevrolet TrailBlazer. Please read this information and your Owner
Manual to ensure an outstanding ownership experience. Note that your vehicle may not include all the
features described in this booklet. Keep this booklet with your Owner Manual for easy reference.
AM/FM Stereo with Six-Disc CD . . . . . . . . . . . . .12
A. Exterior Lamp Controls
B. Air Outlets
C. Turn Signal/Multifunction Lever
D. Instrument Panel Cluster
E. Ignition Switch
F. Transfer Case Controls or Traction
Control Button (if equipped)
G. Rear Window Washer/Wiper
H. Audio System
I. Climate Controls
J. Hood Release
See Section 3 of your Owner Manual.
K. Ashtray (if equipped)
L. Shift Lever
M.Lighter (if equipped)
N. Accessory Power Outlet
O. Rear Window Defogger
(if equipped)
P. Glove Box
Instrument Panel Cluster
A
B
C
D
E
F
Your vehicle’s instrument panel is
equipped with this cluster or one very
similar to it. The instrument panel
cluster includes these key features:
A. Tachometer
B. Speedometer
C. Engine Oil Pressure Gauge
D. Fuel Gauge
E. Voltmeter
F. Engine Coolant Temperature
Gauge
See Section 3 of your Owner Manual.
NOTE: The instrument panel cluster
is designed to inform you about
many important aspects of your vehicle’s operation. It is important to read
your Owner Manual and become
familiar with the information being
relayed to you by the lights, gauges
and indicators, as well as what action
can be taken to ensure safety and to
prevent damage to your vehicle.
Located in the instrument panel cluster,
this lamp illuminates under a variety of
conditions when the On-Board
Diagnostics II (OBD II) system detects a
malfunction in the vehicle’s emission
controls. If it is lit steadily, check the gas
cap to ensure that it is present and
securely fastened. Turn it clockwise until
a “ratcheting” sound is heard, signaling
that it is secure. If this is the cause of
the condition, and the cap is installed
properly, this should turn the light off.
See Section 3 of your Owner Manual.
Driver Information Center (DIC)
(if equipped)
The DIC display is located above the
steering wheel on the instrument cluster,
and can be programmed in three languages. The controls are located on the
steering wheel:
Access trip information
• Press to access each of the
odometer, Trip A, Trip B and Timer
functions.
Reset trip odometers to zero
• Press the reset stem located on the
DIC cluster or use the reset button
() on the steering wheel.
Access fuel information
• Press to view range, average fuel
used and the GM Oil Life System
TM
status.
Reset fuel information
• Press the reset stem located on the
DIC cluster.
Personalize vehicle settings
• Press once and current-driver preferences will be displayed. Any
changes made at this time affect only
the displayed driver.
• Press again to scroll through and
personalize menu features.
5
Use Reset button
• When you find the choice you want,
press to select it and move on to
the next feature.
Reset all personalization features to
their default settings
• Press and hold the Trip Information
button ( ) and the Personalization
button ( ) for four seconds.
Recall driver preferences
• Press memory button #1 or #2
located on the driver’s door.
Available Personalization Features
Depending on the equipment ordered
on your vehicle, you could personalize a
wide variety of preferences on the DIC.
Only the features included on your vehicle will be displayed by the DIC.
Personalization features can include:
• Alarm Warning Type
• Automatic Locking and Unlocking
• Perimeter Lighting
• Remote Lock and Unlock Feedback
• Headlamps On at Exit
• Mirror Curb View Assist
• Easy Exit Driver Seat
• Display Units (English/Metric)
• Display Language
See Section 3 of your Owner Manual.
Programmable Automatic
Door Locks
Your vehicle includes an automatic door
lock/unlock system with a choice of four
features, as well as automatic door lockout prevention to prevent locking the
keys in the vehicle. In the event the
power door lock switch is activated
when a door is open and the key is in
the ignition, the driver door will unlock.
Locking options: The default setting
for the programmable automatic door
locks is to lock automatically when the
transmission is shifted into gear. Locking
options include:
Mode 1: All doors lock when the transmission is shifted into gear
Mode 2: All doors lock when vehicle
speed is over 8 mph (13 kph)
Unlocking options: Choose one of the
following options before personalizing
your unlocking preference:
Mode 1: Driver’s door unlocks when the
transmission is placed into Park
Mode 2: All doors unlock when the
transmission is shifted into Park
Mode 3: All doors unlock when the key
is removed from the ignition
Mode 4: No automatic door unlock
6
Getting to Know Your TrailBlazer
Select and program functions
(if vehicle is equipped with a Driver
Information Center)
• Press the personalization button
( ) on the Driver Information Center
until AUTOMATIC LOCKING appears
on the display. Press the Select button ( ) until the desired setting
appears on the display and press
to select it.
Select and program functions (if not
equipped with DIC)
• With ignition OFF, pull the turn
signal/multifunction stalk toward you
and hold it there while performing the
next step.
• Turn the ignition key to RUN and
LOCK twice, ending in the LOCK
position, and release the turn signal
stalk; the lock switch locks/unlocks,
the horn chirps twice and a 30second timer begins.
• To cycle through the locking/unlocking choices, press the power door
lock switch to the LOCK position to
set locking preference and the
UNLOCK position to set unlocking
preference.
• When the lock switch locks/unlocks
and the horn chirps twice, you have
left programming mode; if more time
is needed, repeat the process above.
• To exit the program mode manually,
turn the ignition key to RUN.
See Section 2 of your Owner Manual.
Remote Lock/Unlock Feedback
(if equipped)
Program Remote Keyless Entry
System lock/unlock feedback (horn,
parking lamps, both or neither)
• Press the Personalization button
( ) on your steering wheel until
REMOTE LOCK FEEDBACK (or
UNLOCK, as desired) appears on the
display.
• Press the Select button ( ) to scroll
through the menu of choices. To
program the lock/unlock feedback
feature, press when the desired
menu option is displayed.
See Section 3 of your Owner Manual.
Headlamp Controls
The exterior lamps knob is located on
the instrument panel, to the left of the
steering wheel.
Turn off the Daytime Running Lamps
(DRL) and automatic headlamps
• Move the knob to the OFF ()
position.
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.