Congratulations on your purchase of a Chevrolet TrailBlazer. Please read this information and
your Owner Manual to ensure an outstanding ownership experience. Note that your vehicle may
not include all the features described in this booklet. Place this booklet in your Owner Manual
portfolio for easy reference.
Located in the instrument panel, this
lamp illuminates under a variety of conditions when the On-Board Diagnostics
II (OBD II) system detects a malfunction
in the vehicle’s emission controls. If it is
lit steadily, check the gas cap to ensure
that it is present and securely fastened.
Turn it clockwise until a “ratcheting”
sound is heard, signaling that it is
secure. If this is the cause of the condition, and the cap is installed properly,
this should turn the light off.
See Section 3 of your Owner Manual.
Driver Information Center (DIC)
(if equipped)
Reset trip odometers to zero
• Press the reset stem located on the
DIC cluster or use the reset button
on the steering wheel.
Access fuel information
• Press to view range, average fuel
economy, instant fuel economy and
the GM Oil Life SystemTMstatus.
Reset fuel information
• Press the reset stem located on the
DIC cluster.
The DIC display is located above the
steering wheel on the instrument cluster,
and can be programmed in three languages. The controls are located on the
steering wheel:
Access trip information
• Press to access each of the
odometer, TRIP A, TRIP B and
TIMER functions.
Personalize vehicle settings
Up to two people can program
individualized settings.
• Press once and current-driver
preferences will be displayed. Any
changes made at this time affect only
the displayed driver.
• Press the button again to scroll
through and personalize menu
features.
5
Use Reset button
• When you find the choice you want,
press to select it and move on to
the next feature.
Reset all personalization features to
their default settings
• Press and hold the Trip Information
button and the Personalization button
down for four seconds.
Recall driver preferences
• Press any button on the Remote
Keyless Entry System transmitter or
press Memory button #1 or #2 on the
driver’s door.
Available Personalization Features
Depending on the equipment ordered
on your vehicle, you could personalize a
wide variety of preferences on the DIC.
Only the features included on your vehicle will be displayed by the DIC.
Personalization features can include:
• Alarm Warning Type
• Automatic Locking and Unlocking
• Seat Position Recall
• Perimeter Lighting
• Remote Lock and Unlock Feedback
• Headlamps On at Exit
• Mirror Curb View Assist
• Easy Exit Driver Seat
• Display Units (English/Metric)
• Display Language
See Section 3 of your Owner Manual.
Programmable Automatic
Door Locks
Your vehicle features an automatic door
lock/unlock feature with a choice of four
features, as well as automatic door lockout prevention to prevent locking the
keys in the vehicle. In the event the
power door lock switch is activated
when a door is open and the key is in
the ignition, the driver door will unlock.
Locking Options: The default setting
for the programmable automatic door
locks is to lock automatically when the
transmission is shifted into gear. Other
locking options include:
Mode 1: All doors lock when the transmission is shifted into gear
Mode 2: All doors lock when vehicle
speed is over 8 mph (13 kph)
Mode 3: No automatic door locking
Unlocking options: Choose one of the
following options before personalizing
your unlocking preference:
Mode 1: Driver’s door unlocks when the
transmission is placed into PARK
Mode 2: All doors unlock when the
transmission is shifted into PARK
Mode 3: All doors unlock when the key
is removed from the ignition
Mode 4: No automatic door unlock
6
Getting to Know Your TrailBlazer
Select and program functions
(if vehicle is equipped with a Driver
Information Center)
• Press the personalization button on
the Driver Information Center until
AUTOMATIC LOCKING appears on
the display. Press the Select button
until the desired setting appears on
the display and press the
Personalization button to select it.
Select and program functions if not
equipped with DIC
• With ignition OFF, pull the turn
signal/multifunction stalk toward you
and hold it there while performing the
next step.
•Turn the ignition key to RUN and
LOCK twice, ending in the LOCK
position, and release the turn signal
stalk; the lock switch locks/unlocks,
the horn chirps twice and a 30-second timer begins.
•To cycle through the locking/unlocking choices, press the power door
lock switch to the LOCK position to
set locking preference and the
UNLOCK position to set unlocking
preference.
• When the lock switch locks/unlocks
and the horn chirps twice, you have
left programming mode; if more time
is needed, repeat the process above.
•To exit the program mode manually,
turn the ignition key to RUN.
See Section 2 of your Owner Manual.
Remote Lock/Unlock Feedback
(if equipped)
Program Remote Keyless Entry
System lock/unlock feedback (horn,
parking lamps, both or neither)
• Press the Personalization button on
your steering wheel until REMOTE
LOCK FEEDBACK (or unlock, as
desired) appears on the display.
• Press the Select button to scroll
through the menu of choices. To
program the lock/unlock feedback
feature, press the Personalization
button when the desired menu option
is displayed.
See Section 3 of your Owner Manual.
Headlamp Controls and Washer
The exterior lamps knob is located on
the instrument panel to the left of the
steering wheel.
Activate the automatic headlamp
system that illuminates all exterior
lamps and the instrument panel/radio
lights when needed
•Turn the knob clockwise to the first
position.
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.