CHERRY KC 1000 User guide

CHERRY KC 1000

Corded Keyboard

6

440602-02 GB, Jul 2013 (JK-0800 = Mod. JG-08)

Operating Manual........................5

1 Button function

Standby

Calculator

E

-Mail program

Browser, home

2

OPERATING MANUAL

CHERRY KC 1000 – Corded Keyboard

Congratulations!

CHERRY has developed and produced
innovative input systems for computers since

1967. You can now experience the difference in
quality, reliability and design with your new
favourite accessory.

Always insist on original CHERRY products…
For information on other products, downloads

and much more, visit us at
www.cherry-world.com.

1 Connecting keyboard

• Connect the keyboard to the USB port of the
PC/laptop.

The keyboard is ready to use without install­ing any software.

2KeyM@n software

The 4 Hotkeys of the keyboard are freely
programmable with the KeyM@n software. Try
it and see!

You can download the current version from

www.cherry.de/english/service/download.php

3Tips

3.1 Cleaning the keyboard

CAUTION: Damage may be caused
by harsh cleaning agents or liq­uids in the keyboard

• Do not use solvents such as gasoline or
alcohol and scouring agents or scouring
sponges for cleaning.

• Prevent liquids from entering the key­board.

• Do not remove the keycaps of the key­board.

1 Switch off the PC.
2 Clean the keyboard with a slightly damp

cloth and some mild cleaning agent (e.g.
dish washing liquid).

3 Dry off the keyboard with a soft, lint-free

cloth.

3.2 RSI syndrome

RSI stands for "Repetitive Strain
Injury". RSI arises due to small
movements continuously repeated
over a long period of time.

Typical symptoms are discomfort in the fin­gers or neck. For further information see:

www.cherry.de/english/service/service­download_rsi.htm

• Set up your workspace ergonomically.

• Position the keyboard and mouse in such a
manner that your upper arms and wrists
are outstretched and to the sides of your
body.

• Take several short breaks, with stretching
exercises if necessary.

• Change your posture often.

3.3 Troubleshooting

• Use another USB port on the PC/laptop.

• To make sure that the keyboard is not
defective, test it if possible with another PC/
laptop.

• Set the option "USB Keyboard Support" or
"USB Legacy Mode" to enabled in the BIOS
of the PC.

4 Disposal

Dispose of the used device at an
official collection point for electronic
waste or at your local dealer.

GB

5

5 Technical data

Designation Value

Supply voltage 5.0 V/DC ±5 % SELV

Current consumption Typ. 50 mA

Storage temperature –20 °C ... +65 °C

GB

Operating temperature 0 °C ... +50 °C

6Contact

ZF Friedrichshafen AG
Electronic Systems
Cherrystraße
91275 Auerbach
Germany

Internet: www.cherry.de
E-mail: [e-mail]

Please provide the following information about
the device when you make an enquiry:

• Item and serial no. of the product

• Name and manufacturer of your system

• Operating system and, if applicable, installed
service pack version

7 General user

information

We reserve the right to make technical
modifications which serve the development of
our products. Improper use and storage can
lead to faults and damage to the product.

The warranty expires completely once
unauthorized modifications to the product have
been carried out. Do not carry out any
unauthorized repairs and do not open up the
product. These instructions are only valid for
the supplied product.

8 Warranty

The statutory warranty applies. Please contact
your specialist dealer or contractual partner.
You can find more information on the warranty
under www.cherry-world.com.

9 Certifications

9.1 Federal Communications
Commission (FCC) Radio
Frequency Interference
Statement

Information to the user: This equipment has
been tested and found to comply with the limits
for Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:

• Reorientate or relocate the receiving
antenna.

• Increase the separation between the
equipment and receiver.

• Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.

• Consult the dealer or an experienced radio/
TV technician for help.

Caution: Any changes or modifications not
expressly approved by the party responsible for
compliance could void the user's authority to
operate the equipment.

9.2 For UL

For use with Listed Personal Computers only!

6