Model AH-100
Features Include:
Complete 40 Channel AM/USB/LSB operation.
Only 6.5 inches tall. A true revolution in design!
Digital LCD "Information Center" provides complete operation information, including both channel and frequency readout.
Five preset memory locations.
Slide-Out battery Ni-Cad batteries pack included.
Battery life enhancement circuitry dramatically extends talk time between charges.
Included: Mobile-Com adapter for direct connection to an external antenna. Exclusively from Cherokee!!
Auto channel scan.
"Dual Watch" for monitoring two channels at the same time. Clarifier control for fine tuning incoming SSB signals. Mic-Gain and RF Gain for maximum signal processing. Squelch control for eliminating background noise.
Key lock prevents unauthorized use.
One touch access to Emergency Channels 9 and 19.
Selectable High/Low power output.
Wrist strap and belt clip.
Plug-in jack for external speaker/microphone (not included). 1 year limited warranty.
--------------------------------------------------------------------------------
Modification Information:
1:Remove the Back cover.
2:Locate the small curcuit board that has the PTT, up, down, lamp buttons.
3:On the back side of the board, toward the bottom outside edge you'll see three curcuit lands that just END.
4:Solder a bridge across all three curcuit lands.
5:The modification is complete, BUT!
6:Put the back on the transceiver.
- If you have used the radio prior to performing this modification you will have troubles activating the feature. I had to leave my battery removed with the power switch in the ON position, with a shorting jumper across the battery supply clips for 24 hours. This made the microprocessor loose its brain. While leaving the radio power switch in the ON position and holding DOWN the CH9 button, slide the battery pack on the Unit. Remember to keep holding
Loading...