Chemsol B1735025 User Manual

SAFETY DATA SHEET

Date Printed: 3/16/2018

Page 1 of 14

METAL PRIMER GRAY PART A - GALLON

Chemsol, 12944 Farmington Rd, Livonia, MI 48150

1. Product and Company Identification

Product Name : METAL PRIMER GRAY PART A - GALLON
Product Code : MP-MG-GL
Recommended Use: Please refer to Product Information/Technical Data Sheet.

Company Identification:
Chemsol
12944 Farmington Rd.
Livonia, MI 48150

Information Phone: [phone]
Emergency Phone: [phone]

2. Hazards Identification

EMERGENCY OVERVIEW

WARNING
Flammable Liquid & Vapor, Category 3
Acute Toxicity, Category 4
Skin Irritation, Category 2
Eye Irritation, Category 2B

Chronic Toxicity, Aspiration Hazard, Category 1
Chronic Toxicity, (Carcinogenicity) Category 2

Potential Health Effects
Eye:
Can cause eye irritation.

SAFETY DATA SHEET

Date Printed: 3/16/2018

Page 2 of 14

METAL PRIMER GRAY PART A - GALLON

Chemsol, 12944 Farmington Rd, Livonia, MI 48150

Skin:
Causes skin irritation.
Ingestion:
If swallowed, call a poison control center or physician if you feel unwell.
Rinse mouth.
Inhalation:
May cause drowsiness or dizziness.
Chronic (Cancer) Information:
Contains CARBON BLACK, which is listed by the IARC as a Group 2B (possibly
carcinogenic to humans). Not listed as a
carcinogen by NTP, ACGIH, OSHA or the European Union. There are no known human
carcinogenic effects related to the PAH
content in carbon blacks. Recent research has shown that the PAH content of
carbon blacks is not released in biological
fluids and thus not available for biological activity.
IARC: A component of this product present at levels greater than or equal to

0.1% is identified as a probable, possible
or confirmed human carcinogen by IARC.

ACGIH: No component of this product present at leveles greater than or equal to

0.1% is identified as a carcinogen or
potential carcinogen by ACGIH.

OSHA: No component of this product present at leveles greater than or equal to

0.1% is identified as a carcinogen or
potential carcinogen by OSHA.

NTP: No component of this product present at leveles greater than or equal to

0.1% is identified as a known or
anticipated carcinogen by NTP.

Teratology (Birth Defects) Information:
INFORMATION NOT AVAILABLE.
Reproduction Information:
INFORMATION NOT AVAILABLE.
Aggravation of Pre-Existing Conditions:
Dermititis or other skin conditions.

3. Composition/Information on Ingredients

Component CAS# % by Wt.

NEPHELINE SYENITE 37244-96-5 39
OSHA: 5MG/M3 TWA (RESPIRABLE FRACTION)
ACGIH: 10 MG/M3 TWA (INHALABLE FRACTION)
MSHA 5 MG/M3 TWA (RESPIRABLE FRACTION)
TALC 14807-96-6 10
OSHA: 2 MG/M3
ACGIH: 2 MG/M3

SAFETY DATA SHEET

Date Printed: 3/16/2018

Page 3 of 14

METAL PRIMER GRAY PART A - GALLON

Chemsol, 12944 Farmington Rd, Livonia, MI 48150

MAGNESITE 546-93-0 7
OSHA: 5 MG/M3 (RESP DUST)
ACGIH: 10 MG/M3 (RESP DUST)
SOLVENT NAPHTHA (PETROLEUM), LIGHT AROMATIC 64742-95-6 5
OSHA PEL: 500 PPM (2000 MG/M3)
ACGIH TLV: 200 MG/M3 (AS TOTAL HYDROCARBON VAPOR)
METHYL NORMAL AMYL KETONE 110-43-0 5
OSHA PEL 100 PPM - TWA
OSHA VPEL 100 PPM -TWA
ACGIH TLV 50 PPM - TWA
ACGIH TLV 233 MG/M3 - TWA
TITANIUM DIOXIDE 13463-67-7 4.591
ACGIH: 10 MG/M3 TWA
OSHA: 10 MG/M3 TWA
EPOXY RESIN 25036-25-3 5
1-METHOXY 2-PROPANOL 107-98-2 4
ACGIH: 100 PPM TWA
OSHA: 100 PPM TWA
ACGIH: 150 PPM STEL
OSHA: 150 PPM CEILING
N-BUTYL ACETATE 123-86-4 1
ACGIH: 150 PPM TWA
OSHA: 150 PPM TWA
ACGIH: 200 PPM STEL
OSHA: 200 PPM CEILING
CARBON BLACK, AMORPHOUS 1333-86-4 .459
ACGIH TLV: 3.5 MG/M3 TWA
OSHA PEL: 3.5 MG/M3 TWA
ETHYL BENZENE 100-41-4 .096
ACGIH TLV 100 PPM - TWA
OSHA PEL 100 PPM - TWA
OSHA PEL 100 PPM - TWA
OSHA PEL 125 PPM - CEILING

4. First Aid Measures

Eyes:
If in eyes: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue
rinsing.

If eye irritation persists: Get medical advice/attention.

Skin:
If on skin: wash with plenty of soap & water. If skin irritation occurs:
Get Medical advice/attention.

Take off contaminated clothing and wash it before reuse.

SAFETY DATA SHEET

Date Printed: 3/16/2018

Page 4 of 14

METAL PRIMER GRAY PART A - GALLON

Chemsol, 12944 Farmington Rd, Livonia, MI 48150

Ingestion:
If swallowed: Immediately call a poison center/physician.
Do NOT induce vomiting.

Inhalation:
If inhaled: Remove person to fresh air and keep comfortable for breathing.
Call a poison control center/get medical attention if you feel unwell.

Note to Physicians:
Aspiration hazard - do not induce vomiting

5. Fire Fighting Measures

Flammable Properties:
Flash Point: >100 F Method: TCC
Explosive Limits:
Lower explosive limit: 1.0
Upper explosive limit: 13.8

Autoignition Temperature:
INFORMATION NOT AVAILABLE.
Hazardous Combustion Products:
Smoke, soot and carbon dioxide, carbon monoxide.
Extinguishing Media:
Dry chemical, CO2, Halon, Foam
Firefighting Procedures:
Special Fire-Fighting Procedures: Wear self-contained breathing apparatus and
protective clothing.
Unusual Fire and Explosion Hazards: High temperatures can cause sealed
containers to rupture due to a build up of
internal pressure. Cool with water spray. Vapors are heavier than air and can
travel some distance away and flash
back.
Sensitivity to Static Discharge: Material may accumulate a static charge which
could act as an ignition source.
Precautions should be taken when pouring to minimize splash/free fall.

6. Accidental Release Measures

Small Spill:
See Information for Large Spill, below:
Large Spill:
Use personal protective equipment. Ensure adequate ventilation. Remove all
sources of ignition. Evacuate personnel to
safe areas. Beware of vapors accumulating to form explosive concentrations.
Vapors can accumulate in low areas.

SAFETY DATA SHEET

Date Printed: 3/16/2018

Page 5 of 14

METAL PRIMER GRAY PART A - GALLON

Chemsol, 12944 Farmington Rd, Livonia, MI 48150

Environmental Precautions:
INFORMATION NOT AVAILABLE.
Methods/Materials for Containment and Cleaning Up:
Contain spillage, and then collect with non-combustible absorbent material,
(e.g. sand earth, diatomaceous earth,
vermiculite) and place in container for disposal according to
local/state/federal regulations.

7. Handling and Storage

Handling:
Keep away from heat, sparks, open flames, hot surfaces. NO SMOKING. Keep
container tightly closed.
Ground/bond container and receiving equipment.
Use explosion-proof electrical/ventilating/lighting/processing equipment.
Use only non-sparking tools.
Take precautionary measures against static discharge.
Wear protective gloves/eye protection/face protection.

Storage:
Prevent unauthorized access.
Store in a well ventilated place.
Keep container tightly closed.
Keep cool.

8. Exposure Controls/Personal Protection

Airborne Exposure Limits:
SEE SECTION 3 FOR THIS INFORMATION
Engineering Controls:
Ventilation: Good general ventilation (typically 10 air changes per hour)
should be used.
Ventilation rates should be matched to conditions.
Ventilation should be explosion proof.
Supplementary local exhaust ventilation, closed systems, or respiratory
protection may be needed in special
circumstances such as poorly ventilated spaces, spray painting, mechanical
generation of dusts, heating, drying, etc.

Personal Protective Equipment

Respiratory Protection:
If engineering controls do not maintain airborne concentrations to an
acceptable level, an approved respirator must be
worn. In the United States of America, if respirators are used, a program
should be instituted to assure compliance