IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed,
including the following:
1. Read all instructions carefully before using grinder, to maximize results and to avoid injury.
2. To protect against risk of electrical shock, do not immerse motor housing in water or other
liquid or operate in wet areas.
3. When grinder is powered, place hands only on recommended surfaces. Finger, hand or
body contact with the moving parts can result in serious injury.
4. Close supervision is necessary when any appliance is used by or near children.
5. Unplug power cord from outlet when not in use, before putting on or taking off parts and
before cleaning.
6. Avoid contacting moving parts. Never feed food by hand. Always use completely assembled
grinder with hopper and food pusher.
7. Never put your fingers near the feed tube while grinder is operating.
8. Keep loose clothing, hair and kitchen utensils away from moving parts to reduce the risk of
personal injury or damage to the grinder.
9. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions,
or is dropped or damaged in any manner. Return grinder if damaged to the nearest authorized
service facility or to EdgeCraft for examination, repair or electrical or mechanical adjustment.
10. The use of attachments not recommended or sold by the appliance manufacturer may cause
fire, electric shock or injury.
11. Do not use outdoors.
12. Do not let cord hang over edge of table or counter or touch hot surfaces.
13. Cutting blade and grinding plate are very sharp. Handle carefully when cleaning.
Avoid contact with cutting edges.
14. Do not attempt to grind or extrude any non-food material with this grinder.
15. CAUTION! This appliance may be fitted with a polarized plug (one blade is wider than the
other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not modify the plug in anyway.
SAVE THESE INSTRUCTIONS
2