Checkline DIS-RL User Manual
TORQUE MEASUREMENT
03/09
Complete color
catalog available.
Call 800-373-9989
or E-mail us.
2 YEAR WARRANTY (RESTRICTIONS APPLY)
Imada, Inc. warrants its products to the original purchaser to be free from defects in
workmanship and material under normal use and proper maintenance for two years (one year
for adapters, attachments, batteries, and cables) from original purchase. This warranty shall not
be effective if the product has been subject to overload, shock load, misuse, negligence, accident
or repairs attempted by others than Imada, Inc.
During the warranty period, we will, at our option, either repair or replace defective products.
Please call our customer service department for a return authorization number and return the
defective product to us with freight prepaid.
The foregoing warranty constitutes the SOLE AND EXCLUSIVE WARRANTY, and we hereby
disclaim all other warranties, express, statutory or implied, applicable to the products and/or
software, including but not limited to all implied warranties of merchantability, fitness, noninfringement, results, accuracy, security and freedom from computer virus. In no event shall
Imada, Inc. and/or its affiliated companies be liable for any incidental, consequential or punitive
damages in connection with the use of its products and/or software.
Specifications subject to change without notice.
Imada, Inc.
®
3100 Dundee Rd., Suite 707, Northbrook, IL 60062 USA
Telephone: (847) 562-0834 Fax: (847) 562-0839
Web Site: www.imada.com E-mail: imada@imada.com
ISO 9001 & ISO/IEC 17025 Accredited
INSTRUCTION MANUAL
Digital Torque
Screwdriver/Tester
Models: DIS-RL2 & DIS-RL10
page 11page 2
TORQUE MEASUREMENTTORQUE MEASUREMENT
List of Equipment
Torque Tester Display Unit
Screwdriver Sensor
2 Phillips tips
Cable
AC adapter/charger
Carrying Case
Digital Torque Tester/Wrench
Model DIS-TW20 Accuracy: ±0.5% F.S., ±1 LSD
Read First: Safety Information
For safety, and for damage avoidance, be sure to read this manual
thoroughly. The warranty is only valid when the product is used following the instructions provided within this manual.
G
Do not use tester in high temperature, high humidity, or in a
damp or wet areas.
G
Recommended operating temperature is between 0-42ºC (32100ºF).
G
Do not apply a torque exceeding the rated capacity (180 lbf-in),
regardless of whether the unit is On or Off. Avoid shock load.
Do not use with impact wrenches.
G
When charging the battery, be sure to use only the provided AC
adapter/charger exclusively.
G
Do not use lacquer thinner or any solvent to clean the unit.
G
Do not disassemble or modify the unit.
1
2
3
4
5
6
6
1
2
4
3
5
Model Capacity
lbf-in kgf-cm N-cm N-m
DIS-RL2 0.10~17.40 0.10~20.00 1.0~200.0 —
DIS-RL10 1.0~90.0 1.0~100.0 10~1000 0.10~10.00
DIS-RL
Specifications subject to change without notice
DIMENSIONS
Loading...