Checkline DIS-IP User Manual
TORQUE MEASUREMENT
INSTRUCTION MANUAL
Digital Torque Tester
Models:
DIS-IP05, DIS-IP5, DIS-IP50, DIS-IP200 & DIS-IP500
2 YEAR WARRANTY (RESTRICTIONS APPLY)
Imada, Inc. warrants its products to the original purchaser to be free from defects in
workmanship and material under normal use and proper maintenance for two years (one
year for adapters, attachments, batteries, and cables) from original purchase. This warranty
shall not be effective if the product has been subject to overload, shock load, misuse,
negligence, accident or repairs attempted by others than Imada, Inc.
During the warranty period, we will, at our option, either repair or replace defective
products. Please call our customer service department for a return authorization number
and return the defective product to us with freight prepaid.
The foregoing warranty constitutes the SOLE AND EXCLUSIVE WARRANTY, and we hereby
disclaim all other warranties, express, statutory or implied, applicable to the products and/or
software, including but not limited to all implied warranties of merchantability, fitness, noninfringement, results, accuracy, security and freedom from computer virus. In no event shall
Imada, Inc. and/or its affiliated companies be liable for any incidental, consequential or
punitive damages in connection with the use of its products and/or software.
03/09
page 11page 2
TORQUE MEASUREMENTTORQUE MEASUREMENT
DIMENSIONS
DIS-IP
Specifications subject to change without notice
DIMENSIONS
ABCDEFG
DIS-IP5 ∅40 40 5 ∅60 ∅50 ∅4.5 6.35
(1.57") (1.57") (.20") (2.36") (1.97") (.18") (1/4" Female Drive)
DIS-IP50 ∅50 63 10 ∅90 ∅74 ∅6.5 9.5
(1.97") (2.48") (.39") (3.54") (2.91") (.26") (3/8" Female Drive)
DIS-IP200 ∅60 72 10 ∅110 ∅90 ∅8.3 12.7
(2.36") (2.83") (.39") (4.33") (3.54") (.32") (1/2" Female Drive)
DIS-IP500 ∅80 99 15.5 ∅140 ∅116 ∅10.5 19
(3.15") (3.89") (.61") (5.51") (4.57") (.41") (3/4" Female Drive)
Digital Torque Tester
List of Equipment
Torque Tester Display Unit
Torque Sensor
Cable
AC adapter/charger
Read First: Safety Information
For safety, and for damage avoidance, be sure to read this manual
thoroughly. The warranty is only valid when the product is used
following the instructions provided within this manual.
G
Do not use tester in high temperature, high humidity, or in
damp or wet areas.
G
Recommended operating temperature is between 0-42ºC (32100ºF).
G
Do not apply a torque exceeding the rated capacity, regardless of whether the unit is On or Off. Avoid shock load. Do
not use with impact wrenches.
G
When charging the battery, be sure to use the provided AC
adapter/charger exclusively.
G
When measuring torque, the unit will have a tendency to turn.
In order to avoid spinning and possible accident, it is very
important to securely mount the sensor to a stable work bench.
G
Do not use lacquer thinner or any solvent to clean the unit.
G
Do not disassemble or modify the unit.
Model
lbf-in lbf-ft kgf-cm kgf-m N-cm
N-m
DIS-IP05 0.020~4.400 — 0.020~5.000 — 0.20~50.00 —
DIS-IP5 0.20~44.00 — 0.20~50.00 — 2.0~500.0 0.020~5.000
DIS-IP50 2.0~440.0 — 2.0~500.0 — 20~5000 0.20~50.00
DIS-IP200 20~1740 2.0~145.0 — 0.20~20.00 — 2.0~200.0
DIS-IP500 20~4400 2.0~362.0 — 0.20~50.00 — 2.0~500.0
Accuracy: ±0.5% F.S., ±1 LSD
1
2
3
4
1
2
3
4
Loading...