Page 1
User Manual
Page 2
Edition
Notes
The Rogue R1X Spot User Manual Rev. 3 covers the description, safety precautions,
as of the release
Trademarks
CHAUVET, the Chau vet logo and Rogue 1X Spot are register ed trademarks or tradem arks of
Chauvet & Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other
countries. Other com pany and product names and lo gos referred to her ein may be tradem arks
of their respective companies.
Copyright Notice
The works of authors hip contained in this manual, includi ng, but not limited to, all design, t ext
Electronically published by Chauvet in the United States of America.
Manual Use
Chauvet authorizes it s c us tomers to download and pr i nt th is manual for professional inf ormation
sage, copy, stora ge, distributio n, modification,
or printing of this manual or its content for any other purpose without written consent from
Chauvet.
Document
Printing
For better results, pr int this docum ent in c olor, on lett er size pap er (8.5 x 11 i n), double-sided. If
Intended
Any person in charge of ins talling, operatin g, and/or m aintaining this product s hould com pletely
d with the product, as well as this manual, before installin g,
operating, or maintaining this product.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects.
y errors or omissions in this document.
a revision of this manual or a new edition to incorporate such changes.
Edition Notes
installation, program ming, operation, and maintenance of the Rogue R1X Spot
of this edition.
and images are owned by Chauvet.
© Copyright 2018 Chauvet & Sons, LLC. All rights reserved.
purposes only. Chauvet expr essly prohibits th e u
using A4 paper (210 x 297 mm), configure your printer to scale the content accordingly.
Audience
read through the guide tha t shippe
However, Chauvet assumes no responsibility for an
Chauvet reser ves the r ight to revise a nd m ak e change s to the c onte nt of this doc um ent witho ut
obligation that Chauvet notif y any person or company of such revision or changes. This does
not in any way constitute a commitment by Chauvet to make such changes. Chauvet may issue
Rogue R1X Spot User Manual Rev. 3
Page 3
Table of Contents
Table of Contents
1. Before You Begin ...................................................................................................................................... 1
What Is Included ........................................................................................................................................................... 1
Claims .......................................................................................................................................................................................... 1
Manual Conventions .................................................................................................................................................................... 1
Symbols ....................................................................................................................................................................................... 1
Product At A Glance ..................................................................................................................................................... 2
Safety Notes ................................................................................................................................................................. 2
Personal Safety ............................................................................................................................................................................ 2
Mounting And Rigging .................................................................................................................................................................. 2
Power And Wiring ........................................................................................................................................................................ 2
Operation ..................................................................................................................................................................................... 2
2. Introduction ............................................................................................................................................... 3
Description .................................................................................................................................................................... 3
Features ........................................................................................................................................................................ 3
Overview ....................................................................................................................................................................... 4
Dimensions ................................................................................................................................................................... 5
3. Setup .......................................................................................................................................................... 6
AC Power ...................................................................................................................................................................... 6
AC Plug ........................................................................................................................................................................................ 6
Fuse Replacement ....................................................................................................................................................................... 6
Power Linking ............................................................................................................................................................... 6
DMX Linking.................................................................................................................................................................. 6
DMX Personalities ........................................................................................................................................................................ 6
Gobo Wheel .................................................................................................................................................................. 7
Gobo Replacement ...................................................................................................................................................................... 8
Color Wheel .................................................................................................................................................................. 9
Mounting ..................................................................................................................................................................... 10
Orientation ................................................................................................................................................................................. 10
Rigging ....................................................................................................................................................................................... 10
Procedure .................................................................................................................................................................................. 10
4. Operation ................................................................................................................................................. 11
Control Panel Description ........................................................................................................................................... 11
Control Options .......................................................................................................................................................................... 11
Programming.............................................................................................................................................................................. 11
Menu Map ................................................................................................................................................................... 12
Menu Map (Cont.) ....................................................................................................................................................... 13
Address ....................................................................................................................................................................... 14
Set the DMX Address ................................................................................................................................................................ 14
Run Mode ................................................................................................................................................................... 14
DMX Personality ........................................................................................................................................................................ 14
Auto Test .................................................................................................................................................................................... 14
Manual Test ............................................................................................................................................................................... 14
Setup ........................................................................................................................................................................... 15
Pan Reverse .............................................................................................................................................................................. 15
Tilt Reverse ................................................................................................................................................................................ 15
Screen Reverse ......................................................................................................................................................................... 15
Pan Angle .................................................................................................................................................................................. 15
Tilt Angle .................................................................................................................................................................................... 15
Pan and Tilt Movement BlackOut ............................................................................................................................................... 15
Color Movement BlackOut ......................................................................................................................................................... 15
Gobo Movement BlackOut ......................................................................................................................................................... 15
Reset Function ........................................................................................................................................................................... 16
Factory Reset Function .............................................................................................................................................................. 16
Rogue R1X Spot User Manual Rev. 3 -i-
Page 4
Table of Contents
System Information ..................................................................................................................................................... 17
Offset Mode ................................................................................................................................................................ 17
Pan ............................................................................................................................................................................................. 17
Tilt .............................................................................................................................................................................................. 17
Gobo .......................................................................................................................................................................................... 17
Gobo Rotate ............................................................................................................................................................................... 17
Gobo 2 ....................................................................................................................................................................................... 17
Color 1 ....................................................................................................................................................................................... 17
Color 2 ....................................................................................................................................................................................... 17
Prism .......................................................................................................................................................................................... 17
Focus ......................................................................................................................................................................................... 17
Iris .............................................................................................................................................................................................. 17
Frost ........................................................................................................................................................................................... 17
Dimmer ...................................................................................................................................................................................... 17
FO. Yellow Edge ........................................................................................................................................................................ 17
DMX Values ................................................................................................................................................................ 18
DMX Values (Cont.) .................................................................................................................................................... 19
DMX Values (Cont.) .................................................................................................................................................... 20
DMX Values (Cont.) .................................................................................................................................................... 21
DMX Values (Cont.) .................................................................................................................................................... 22
DMX Values (Cont.) .................................................................................................................................................... 23
5. Technical Information ............................................................................................................................. 24
Product Maintenance .................................................................................................................................................. 24
6. Technical Specifications ......................................................................................................................... 25
Returns ....................................................................................................................................................................... 27
Contact Us ................................................................................................................................................... 28
-ii- Rogue R1X Spot User Manual Rev. 3
Page 5
1. BEFORE YOU BEGIN
What Is
• Rogue R1X Spot
• Quick Reference Guide
Claims
Carefully unpack the pr oduct immediately and check the box to make sure all the parts ar e in
If the box or the contents (the product and included accessories) appear damaged from
. Failure to
report damage to the c arrier immediately may inval idate your claim. In addition, keep the box
For other issues, such as missing components or parts, damage not related to shipping, or
concealed damage, file a claim with Chauvet within 7 days of delivery.
Manual
Convention
Meaning
1–512
A range of values in the text
50/60
A set of mutually exclusive values in the text
<SET>
A button on the product’s control panel
Settings
A product function or a menu option
MENU>Settings
A sequence of menu options
1–10
A range of menu values from which to choose in a menu
Yes/No
A set of two mutually exclusive menu options in a menu
ON
A unique value to be entered or selected in a menu
Symbols
Symbols
Meaning
Critical installation, configuration, or operation information. Failure to
damage third-party equipment, or cause harm to the operator.
The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data
transmission protocol.
Before You Begin
Included
Conventions
• Neutrik® powerCON® power cord
• 2 Omega brackets with mounting hardware
• Warranty Card
the package and are in good condition.
shipping or show signs of mishandling, notif y the carrier immediately, not Chauvet
and contents for inspection.
comply with this information may cause the product not to work,
Important installation or configuration information. Failure to comply
with this information may keep the product from working.
Useful information.
Rogue R1X Spot User Manual Rev. 3 -1-
Page 6
Product At A
x
x
x
Auto-Ranging Power
Supply
P
x
P
P
x
x
Safety Notes
Read all the following Safety Notes before working with this product. These notes include
important information about the installation, usage, and maintenance of this product.
This product contains no user-serviceable parts. Any reference to servicing in this
open the housing or attempt any repairs.
Personal Safety
• Avoid direct eye exposure to the light source while the product is on.
• Do not touch this product’s housing during operation because it may be very hot.
Mounting And
• This product is for indoor use only! To prevent risk of fire or shock, do not expose this
• When hanging this product, always secure to a fastening device using a safety cable.
Power And
• Always make sure you are connecting this product to the proper voltage in accordance
• Never disconnect this product by pulling or tugging on the power cable.
Operation
• Do not operate this product if you see damage to the housing, lenses, or cables. Have the
• In case of a serious operating problem, stop using this product immediately!
In the unlikely event that your Chauvet product may require service, contact Chauvet
Technical Support.
Before You Begin
Use on Dimmer
Glance
Rigging
Outdoor Use
Sound-Activated
DMX
Master/Slave
User Manual will only apply to properly trained Chauvet certified technicians. Do not
All applicable local codes and regulations apply to proper installation of this product.
• Always disconnect this product from its power source before servicing.
• Always connect this product to a grounded circuit to avoid the risk of electrocution.
product to rain or moisture. (IP20)
• CAUTION: When transferring product from extreme temperature environments, (e.g. cold
truck to warm humid ballroom) condensation may form on the internal electronics of the
product. To avoid causing a failure, allow product to fully acclimate to the surrounding
environment before connecting it to power.
• Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from
adjacent surfaces.
• This product weighs 37.6 lb (17.1 kg). Always ask for help when mounting this product to
avoid personal injuries or damage to the product.
• Make sure there are no flammable materials close to this product while it is operating.
• Always carry this product by the handles. Do not carry from the head.
Auto Programs
Replaceable Fuse
User-Serviceable
Wiring
with the specifications in this manual or on the product’s specification label.
• Never connect this product to a dimmer pack or rheostat.
damaged parts replaced by an authorized technician at once.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
• Do not cover the ventilation slots when operating to avoid internal overheating.
• Do not aim this product toward the Sun. The lenses could concentrate the solar energy
and cause internal overheating.
• The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at a
higher temperature.
-2- Rogue R1X Spot User Manual Rev. 3
Page 7
2. INTRODUCTION
Description
The Rogue R1X Spot is a compact, electronic, moving yoke product equipped with a 170-watt
. It
also includes a rotating 3-facet prism, remote focus, and iris.
Features
• Compact, moving yoke fixture with a prism and motorized focus
• Selectable PWM settings to maintain flicker free operation on camera
LED. It includes 1 color wh eel with 8 colors plus white and 2 gobo whee ls for gobo morphing
• Precision-designed optics for hard-edged effects
• Extremely quiet for operation in any situation
• Color wheel:
• 8 colors + Open (white)
• Split/linear colors
• Rainbow color spin at variable speed
• Gobo wheel 1:
• 7 slot-n-lock gobos + Open
• Indexed, rotating gobo wheel with gobo shake
• Interchangable
• Gobo wheel spin at variable speed
• Gobo wheel 2:
• 8 gobos + Open
• Gobo wheel spin at variable speed
• 3-facet rotating prism
• DMX channels: 16 or 19
• Pan: 540°
• Tilt: 250°
• Reset over DMX
• Electronic power supply
• 3- and 5-pin DMX input and output connectors
• RDM enabled for remote addressing and trouble shooting
• Selectable LED maximum output to match legacy Rogue R1 Spots
Introduction
Rogue R1X Spot User Manual Rev. 3 -3-
Page 8
Power Out
Front View
Rear View
Power
Switch
Fuse
Control Panel
Handle
Top View
Side View
3- and 5-pin
DMX In
Power In
3- and 5-pin
DMX In
pin
DMX Out
pin
DMX Out
Introduction
Overview
3- and 5-
3- and 5-
-4- Rogue R1X Spot User Manual Rev. 3
Page 9
Dimensions
8.94 in
227 mm
9.21 in
234 mm
13.98 in
355 mm
14.17 in
360 mm
11.34 in
288 mm
11.10 in
282 mm
10.55 in
268 mm
4.53 in
115 mm
17.60 in
447 mm
Introduction
Rogue R1X Spot User Manual Rev. 3 -5-
Page 10
AC Power
Each Rogue R1X Spot has an auto-ranging power supply that works with an input voltage range
,
chart
The listed current r ati ng in d icat es t he maximum curr ent dr a w dur ing normal opera tion. For more
:
www.chauvetprofessional.com.
Remote Device
Management
(RDM)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to
directionally along existing DMX cabling. Check the DMX controller’s User
• Always connect this product to a protected circuit with an appropriate electrical
completely disconnect the product from power via breaker or by unplugging it.
the
rheostat or dimmer channel serves only as a 0 to 100% switch.
AC Plug
The Rogue R1X Spot comes with a power input cord t erminated with a Neutrik® powerCON® A
connector on one end and an Edison plug on the other end (U.S. mark et). If the power input
rd that came with your pr oduc t h as no pl ug, or if you nee d to change the Edison plu g, us e the
table below to wire the new plug.
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow or Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
Fuse
1. Disconnect this product from the power outlet.
4. Screw the fuse holder cap back in place and reconnect power.
Make sure to disconnect the product’s power cord before replacing a blown fuse. Always
replace the blown fuse with another of the sa me type and rating.
Power Linking
The Rogue R1X Spot suppor ts power link ing. Yo u can power link up to 6 products at 120 V; u p
for purchase.
DMX Linking
You can link the Rogue R1X Spot to a D MX controller using a 3- or 5-pin DMX connection. If
, you can control each
individually with a single DMX controller.
DMX
The Rogue R1X Spot uses a 3- or 5-pin DMX data connec tion for the 16- and 19-c hannel DMX
personalities.
If you are not familiar with or need more information about DMX standards, Master/Slave
connectivity, or the DMX cables needed to link this product to a DMX controller,
download the DMX Primer from the Chauvet website: www.chauvetprofessional.com.
Setup
3. SETUP
of 100 to 240 VAC, 50/6 0 H z. To determ ine the po wer requirem ents for each Rogue R1X Spot
refer to the label affixed to the pr oduct. You can also r efer to the T echnical Specif ications
in this manual.
information, you may download Sizing Circuit Breakers from the Chauvet website
communicate biManual or with the manufacturer as not all DMX controllers have this capability. The Rogue R1X
supports RDM protocol that allows feedback to make changes to menu map options.
ground to avoid the risk of electrocution or fire.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if
Replacement
Personalities
co
2. Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove the blown fuse and replace with a another fuse of the same type and rating
(F 4 A, 250 V).
to 12 at 208 V; or up to 13 at 230 V.
This product com es with a power input cord. Power link ing cables are available fr om Chauvet
using other DMX-compatible products with the Rogue R1X Spot
personalities.
• Refer to the Introduction chapter for a brief description of each DMX personality.
• Refer to the Operation chapter to learn how to configure the Rogue R1X Spot to work in
these personalities.
• The DMX Values section provides you with detailed information regarding the DMX
-6- Rogue R1X Spot User Manual Rev. 3
Page 11
Gobo Wheel
The Rogue R1X Spot includes two gobo wheels: 7 rot ating gobos pl us open on w heel 1 and 8
. The diagram shows the gobo number on the wheel, as
numbered in the DMX Values tables.
Gobo holders 5 and 6 on gobo wheel 1 are slightly smaller to accommodate glass gobos
(see below).
1
2
3
4
5 6 7
Open
Gobo Wheel 1
26.9 mm
22.5 mm
Metal Gobo Dimensions
Positions 1, 2, 3, 4, and 7
25 mm
23 mm
Glass Gobo Dimensions
Gobo Wheel 1
Setup
fixed gobos plus open on wheel 2
Gobo Wheel 1
Positions 5 and 6
Rogue R1X Spot User Manual Rev. 3 -7-
Page 12
Gobo
The gobos in the Rogu e R1X Spot gobo wheel 1 are removable fr om their gobo holders. T his
is quite simple, although it requires the technician to be careful and to follow the
recommended procedure.
• Make sure to disconnect the product’s power cord before replacing a gobo
• All custom gobos in the Rogue R1X Spot gobo wheel 1 must be aluminum or gla ss.
Procedure
1. Turn the product off and disconnect it from the power outlet.
correctly installed, the gobo plate should easily slide itself into the gobo wheel slot.
Gobo Replacement
Gobo Holder
Glare Shield
Gobo
Retaining Spring
Gobo Holder
Gobo Wheel 1
5
6
Setup
Replacement
Diagrams
operation
• Always replace a gobo with a gobo of the same dimensions.
• When inserting a glass gobo, always make sure that the s h iny side of the gobo
(glass base) faces the lamp. This provides a layer of protection against the high
temperature from the lamp.
2. Open the head cover by loosening the 4 Phillips-head ¼-turn screws on the sides of the top
cover.
3. Separate the gobo holder away from the gobo wheel by pushing it toward the front of the
moving head (directi on 1 in the diagram). Be careful not to push the gobo out of the gobo
holder.
4. Extract the gobo holder by pulling it outward (dir ection 2 in the diagram).
5. On a flat surface, remove the expansion ring that holds the gobo in place and remove the
gobo from the gobo holder.
6. Insert a new gobo and hold it in place with the expansion ring.
7. Slide the tip of the gobo holder under the pressure plate near the center of the gobo wheel.
8. Push the gobo holder inwards. DO NOT force the gobo holder into the gobo wheel slot. If
-8- Rogue R1X Spot User Manual Rev. 3
Page 13
Setup
The gobos on gobo wheel 2 are not removable.
Color Wheel
The Rogue R1X Spot includes a color wheel with 8 fixed colors plus open (white) as indicated
below. The diagram shows the color names on the wheel, as shown in the DMX Values tables.
8
Open
1 2 3
4 7 6
5
Red
Orange
Green
Yellow
Blue
CTO 3200
Magenta
Purple
8 1 2 3 4 5 6 7 Gobo Wheel 2
(White)
Rogue R1X Spot User Manual Rev. 3 -9-
Page 14
Mounting
Before mounting this product, read and follow the Safety Notes. For our Chauvet line of
mounting clamps, go to http://trusst.com/products/.
Orientation
Always mount this product in a safe position and make sure there is adequate room for
Rigging
Chauvet recommends using the following general guidelines when mounting this product.
• When selecting an installation location, consider easy access to this product for operation,
• When hanging this product, always secure to a fastening device using a safety cable.
Procedure
The Rogue R1X Spot comes with a preinstalled mountin g surface to which you will be able to
Make sure the clamps are capable of supporting the
Use two mounting poi nts per product. In addition, us e a safety cable to
link the product to the structure.
Floor Mounting
Overhead Mounting
Omega Brackets
Safety Cable
Mounting Clamp
Mounting
Surface
Setup
ventilation, configuration, and maintenance.
programming adjustments, and routine maintenance.
• Make sure to mount this product away from any flammable material as indicated in the
Safety Notes
.
• Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
• If hanging this product, make sure that the mounting location can support the product’s
weight. See the T ec hnical Specif ic at io ns
for the weight-bearing requirements of this
product.
attach the 2 included omega brackets.
weight of this produc t.
Mounting Diagram
-10- Rogue R1X Spot User Manual Rev. 3
Page 15
4. OPERATION
Control Panel
Button
Function
<MENU>
Exits from the current menu or function
<ENTER>
Enables the currently displayed menu or sets the currently
selected value in to the current function
<UP>
Navigates upward through the menu list or increases the numeric
value when in a function
<DOWN>
Navigates downward through the menu list or decreases the
numeric value when in a function
Control Options
You can set the Rogue R1X Spot starting address in the 001–512 DMX range. This
enables control of up to 26 products in the 19-channel 19CH personality.
Programming
Refer to the Menu Map to unders tand the m enu optio ns. The m enu m ap shows the m ain
screen will automatically revert to the opening screen.
Description
Operation
level and a variable number of programming levels for each option.
• To enter programming mode, press any key on the control panel to wake the opening
screen. Press <MENU> until you see one of the main level options.
• To highlight a menu option or to change a setting, press <UP> or <DOWN>.
• To change menu levels as shown in the Menu Map
This is equivalent to moving right and left of the Menu Map, respectively.
• To accept the current or new value, press <ENTER>.
• To return to the previous menu without making changes, press <MENU>.
• To exit programming mode, press <MENU> until you see one of the main level
options, the opening screen, or do not press any button for 30 seconds and the
, press <ENTER> or <MENU>.
Rogue R1X Spot User Manual Rev. 3 -11-
Page 16
Address
001–512
Sets the DMX starting address
16CH
19CH
Auto Test
Runs the product’s test sequence
Pan
Pan Fine
Tilt
Tilt Fine
P/T Speed
Dimmer
Dimmer Fine
Shutter
Color
Gobo
Gobo Rot
Gobo2
Focus
Prism
R-Prism
Iris
P/T Macro
P/T
Ma.Speed
Special
Function
YES
Reverse pan operation
NO
Normal pan operation
YES
Reverse tilt operation
NO
Normal tilt operation
YES
Rotates control screen view 180°
NO
Normal control screen view
540
Selects the 540° pan angle range
360
Selects the 360° pan angle range
180
Selects the 180° pan angle range
Operation
Menu Map
Main Level Programming Levels Description
Run Mode
DMX
Manual Test
000–255
Selects the DMX mode
Allows manual control of all settings from the
control panel
Setup
-12- Rogue R1X Spot User Manual Rev. 3
Pan Reverse
Tilt Reverse
Screen Reverse
Pan Angle
Page 17
Menu Map (Cont.)
270
Selects the 270° tilt angle range
180
Selects the 180° tilt angle range
90
Selects the 90° tilt angle range
YES
NO
YES
NO
YES
NO
600Hz
1200Hz
6000Hz
15KHz
ECO
Auto
Legacy mode-sets the LED level to the original
R1 Spot intensity.
YES
NO
YES
NO
YES
NO
Gobo2
YES
NO
YES
NO
YES
NO
YES
Ver:
Displays the software version
Running Mode:
Displays the current running mode
Dmx Address:
Displays the current DMX address
Temperature:
Displays the product’s temperature in Celsius
UID:
Displays product’s UID
Main Level Programming Levels Description
Tilt Angle
Operation
Setup
BL.O.P/T Move
BL.O.ColorMove
BL.O.GoboMove
PWM Option
Fans
LED Power 50-100
Pan/Tilt
Prism
Reset
Function
Color
Gobo&R/
Defines the pan/tilt move-in-black delay
Defines the color change move-in-black delay
Defines the gobo change move-in-black delay
Selects the PWM output frequency
Change the fan speed mode
Resets pan/tilt functions to the home position
Resets all prism functions to the home position
Resets all color functions to the home position
Resets all gobo functions to the home position
Factory Settings
Sys Info
Rogue R1X Spot User Manual Rev. 3 -13-
Focus/Iris
All
NO
Resets the focus and iris functions to the home
position
Resets all functions to the home position
Reverts the product back to the original factory
settings
Page 18
Address
This programming level sets the DMX starting address.
• Starting from the Main Level screen, select Address, press <ENTER>.
Set the
In this mode, each product will respond to a unique starting address from the DMX
This option
• Change the starting address (001–512), press <ENTER>.
Run Mode
This programming level sets the DMX personality and controls the different test modes.
• Starting from the Main Level screen, select Run Mode, press <ENTER>.
DMX Personality
This option selects which DMX Personality the product uses.
2. Select the DMX personality 16CH or 19CH, press <ENTER>.
• See the DMX Values section for the highest starting address you can select for
due to the new personality setting.
Auto Test
This option runs every attribute individually through 1 cycle.
• Highlight Auto Test, press <ENTER>.
The Auto Test will en d af ter 1 full cycle. Y ou can stop the test by pressing <MENU>
at any time.
Manual Test
This option allows you to run each attribute individually or as a group.
3. Repeat step 2 for the other attributes.
When exiting the Man ual Test level, the values of all tested channels will go back
to zero.
Operation
DMX Address
controller. All products with the sam e starting address will respond in unis on.
sets the products DMX address.
1. Highlight DMX, press <ENTER>.
each personality.
• Make sure that the starting addresses on the various products do not overlap
1. Highlight Manual Test, press <ENTER>.
2. Highlight the desired attribute listed on the control panel screen, press <ENTER>.
• Set the attribute value (000–255), press <ENTER>.
-14- Rogue R1X Spot User Manual Rev. 3
Page 19
Setup
This programm ing level controls the product’s head movement, lamp adjustments, a nd
maintenance timer.
• Starting from the Main Level screen, select Setup, press <ENTER>.
Pan Reverse
Reverses the operation of the pan attribute.
2. Select YES or NO, press <ENTER>.
Tilt Reverse
Reverses the operation of the tilt attribute.
2. Select YES or NO, press <ENTER>.
Screen Reverse
To invert the control panel screen:
2. Select YES or NO, press <ENTER>.
Pan Angle
This option assigns pan range.
2. Select 540, 360, or 180, press <ENTER>.
Tilt Angle
This option assigns tilt range.
2. Select 90, 180, or 270, press <ENTER>.
Pan and Tilt
This option engag es t h e sh ut ter t o block all light out put whe ne ver the product’s head is in
2. Select YES or NO, press <ENTER>.
Color Movement
This option engages the shutter to block all light output whenever the product’s color
2. Select YES or NO, press <ENTER>.
Gobo Movement
This option engages the shutter to block all light output whenever the product’s gobo
2. Select YES or NO, press <ENTER>.
LED Frequency
This option changes the Pulse Width Modulation (P WM) frequency of the LEDs on the
2. Choose an output frequency. (600Hz, 1200Hz, 6000Hz, or 15KHz).
LED Power
This option enables the product to match the light intensity of the original Rogue R1 Spot.
2. Choose the LED intensity (50-100).
1. Highlight Pan Revers e, press <ENTER>.
1. Highlight Tilt Reverse, press <ENTER>.
1. Highlight Screen Reverse, press <ENTER>.
1. Highlight Pan Angle, press <ENTER>.
1. Highlight Tilt Angle, press <ENTER>.
Operation
Movement BlackOut
BlackOut
BlackOut
motion.
1. Highlight BL.O.P/T Move, press <ENTER>.
wheel is in motion.
1. Highlight BL.O.ColorMove, press <ENTER>.
wheel is in motion.
1. Highlight BL.O.GoboMove, press <ENTER>.
Rogue R1X Spot.
1. Go to the PWM Option main level.
1. Go to the LED POWER main level
Rogue R1X Spot User Manual Rev. 3 -15-
Page 20
Reset Function
This programming level allows the user to reset individual functions to the home position.
• Starting from the Setup screen level, select Reset Function, press <ENTER>.
Pan/Tilt Reset
This option resets the Pan/Tilt functions to the home position.
2. Select YES or NO, press <ENTER>.
Prism Reset
This option resets the Prism functions to the home position.
2. Select YES or NO, press <ENTER>.
Color Reset
This option resets the Color functions to the home position.
2. Select YES or NO, press <ENTER>.
Gobo&R/Gobo2
This option resets the Gobo&R/Gobo 2 functions to the home position.
2. Select YES or NO, press <ENTER>.
Focus/Iris
This option resets the Focus/Iris functions to the home position.
2. Select YES or NO, press <ENTER>.
All Reset
This option resets the all the functions to the home position.
2. Select YES or NO, press <ENTER>.
Factory Reset
This reverts the product back to its original factory settings.
2. Select YES or NO, press <ENTER>.
Operation
1. Highlight Pan/Tilt, press <ENTER>.
1. Highlight Prism, pr es s <ENTER>.
1. Highlight Color, press <ENTER>.
Reset
Reset
Function
1. Highlight Gobo&R/Gobo2, press <ENTER>.
1. Highlight Focus/Iris, press <ENTER>.
1. Highlight All, press <ENTER>.
1. Starting from the Setup screen level, select Factory Settings, press <ENTER>.
-16- Rogue R1X Spot User Manual Rev. 3
Page 21
Operation
System
Information
This programming level shows standard information regarding the product’s operating status.
• Temperature: The current product temperature is displayed on the screen.
RDM
This option shows the product’s UID #. The UID # is used when using the RDM functionality of
Use DMX configurations to operate the product with a DMX controller.
Offset Mode
The Offset mode pro vides fine adj ustments for the home position of all the m oving parts in the
optical path as well as the pan and tilt m ovements. This wa y, when in their home pos ition, the
enter 2323, press <ENTER>. This brings you into the Zero Adjust menu screen.
Pan
1. Highlight PAN, press <ENTER>.
2. Select 000–255, press <ENTER>.
Tilt
1. Highlight TILT, press <ENTER>.
2. Select 000–255, press <ENTER>.
Gobo
1. Highlight GOBO, press <ENTER>.
2. Select 000–255, press <ENTER>.
Gobo Rotate
1. Highlight GOBO ROT, press <ENTER>.
2. Select 000–255, press <ENTER>.
Gobo 2
1. Highlight GOBO2, press <ENTER>.
2. Select 000–255, press <ENTER>.
Color 1
1. Highlight COLOR1, press <ENTER>.
2. Select 000–255, press <ENTER>.
Color 2
1. Highlight COLOR2, press <ENTER>.
2. Select 000–255, press <ENTER>.
Prism
1. Highlight PRISM, press <ENTER>.
2. Select 000–255, press <ENTER>.
Focus
1. Highlight FOCUS, press <ENTER>.
2. Select 000–255, press <ENTER>.
Iris
1. Highlight IRIS, press <ENTER>.
2. Select 000–255, press <ENTER>.
Frost
1. Highlight FROST, press <ENTER>.
2. Select 000–255, press <ENTER>.
Dimmer
1. Highlight DIMMER, press <ENTER>.
2. Select 000–255, press <ENTER>.
FO. Yellow Edge
Reserved for future use.
• Starting from the Main Level screen, select Sys Info, press <ENTER>.
• Ver: The current software version is displayed on the screen.
• Running Mode: The current Running mode is displayed on the screen.
• DMX Address: The current DMX address is displayed on the screen.
the product
1. Go to the Information main level.
2. Select UID: and the number will show on the screen.
moving parts do not show any border or reduce the light output.
1. Starting from the Main Level screen, press and hold <MENU> until the passcode screen
appears.
2. Using <UP> to increase the number value and <DOWN> to move to the next column,
Rogue R1X Spot User Manual Rev. 3 -17-
Page 22
19CH
1
Pan
000ó255
0–100%
2
Fine Pan
000ó255
0–100%
3
Tilt
000ó255
0–100%
4
Fine Tilt
000ó255
0–100%
5
Pan/Tilt Speed
000ó255
0–100%
6
Dimmer
000ó255
0–100%
7
Fine Dimmer
000ó255
0–100%
000ó003
216ó255
Closed
Open
000ó006
192ó255
Open
Counter-clockwise color scroll, slow to fast
Operation
DMX Values
Channel Function Value Percent/Setting
8 Shutter
9 Color Wheel
004ó007
008ó076
077ó145
146ó215
007ó013
014ó020
021ó027
028ó034
035ó041
042ó048
049ó055
056ó063
064ó127
128ó191
Open
Slow to fast
Pulse effect from slow to fast
Random effect from slow to fast
Red
Orange
Green
Yellow
Blue
CTO 3200 K
Magenta
Purple
Split colors
Clockwise color scroll, slow to fast
-18- Rogue R1X Spot User Manual Rev. 3
Page 23
DMX Values (Cont.)
19CH
000ó007
192ó255
Open
Counter-clockwise gobo scroll, slow to fast
000ó063
232ó255
Gobo index
Boomerang effect, slow to fast
000ó006
192ó255
Open
Counter-clockwise gobo scroll, slow to fast
13
Focus
000ó255
0–100%
000ó004
005ó255
No function
Prism insert
000ó127
194ó255
Prism index
Clockwise rotation, slow to fast
000ó063
192ó255
Wide to narrow
Iris effect, out slow, in fast
Channel Function Value Percent/Setting
(Cont.)
10 Gobo Wheel 1
008ó015
016ó023
024ó031
032ó039
040ó047
048ó055
056ó063
064ó119
120ó127
128ó191
Operation
Gobo 1
Gobo 2
Gobo 3
Gobo 4
Gobo 5
Gobo 6
Gobo 7
Gobo shake 1–7, slow to fast
Open
Clockwise gobo scroll, slow to fast
11 Gobo Wheel 1 Rotate
12 Gobo Wheel 2
14 Prism
15 Prism Rotate
064ó147
148ó231
007ó013
014ó020
021ó027
028ó034
035ó041
042ó048
049ó055
056ó063
064ó120
121ó127
128ó191
128ó189
190ó193
Clockwise rotation, slow to fast
Counter-clockwise rotation, slow to fast
Gobo 1
Gobo 2
Gobo 3
Gobo 4
Gobo 5
Gobo 6
Gobo 7
Gobo 8
Gobo shake 1–8, slow to fast
Open
Clockwise gobo scroll, slow to fast
Counter-clockwise rotation, fast to slow
Stop
16 Iris
Rogue R1X Spot User Manual Rev. 3 -19-
064ó127
128ó191
Iris effect, slow to fast
Iris effect, in slow, out fast
Page 24
19CH
000ó007
248ó255
No function
Effect 31
Operation
DMX Values (Cont.)
(Cont.)
Channel Function Value Percent/Setting
17 Movement Macros
008ó015
016ó023
024ó031
032ó039
040ó047
048ó055
056ó063
064ó071
072ó079
080ó087
088ó095
096ó103
104ó111
112ó119
120ó127
128ó135
136ó143
144ó151
152ó159
160ó167
168ó175
176ó183
184ó191
192ó199
200ó207
208ó215
216ó223
224ó231
232ó239
240ó247
Effect 1
Effect 2
Effect 3
Effect 4
Effect 5
Effect 6
Effect 7
Effect 8
Effect 9
Effect 10
Effect 11
Effect 12
Effect 13
Effect 14
Effect 15
Effect 16
Effect 17
Effect 18
Effect 19
Effect 20
Effect 21
Effect 22
Effect 23
Effect 24
Effect 25
Effect 26
Effect 27
Effect 28
Effect 29
Effect 30
-20- Rogue R1X Spot User Manual Rev. 3
Page 25
DMX Values (Cont.)
19CH
Movement Macro
Speed
000ó007
248ó255
No function
Pan/Tilt movement ramp speed, increase off
16CH
Channel
Function
Value
Percent/Setting
1
Pan
000ó255
0–100%
2
Fine Pan
000ó255
0–100%
3
Tilt
000ó255
0–100%
4
Fine Tilt
000ó255
0–100%
5
Pan/Tilt Speed
000ó255
0–100%
6
Dimmer
000ó255
0–100%
000ó003
216ó255
Closed
Open
Channel Function Value Percent/Setting
(Cont.)
18
Operation
000ó255 0–100%
008ó015
016ó023
024ó031
032ó039
040ó047
048ó055
056ó095
096ó103
19 Control
104ó111
112ó119
120ó127
128ó135
136ó143
144ó151
152ó159
160ó167
168ó239
240ó247
Blackout during pan/tilt (3 sec hold)
Blackout while color wheel moving (3 sec hold)
Blackout while gobo wheels moving (3 sec hold)
Disable pan/tilt blackout (3 sec hold)
Disable color wheel blackout (3 sec hold)
Disable gobo wheel blackout (3 sec hold)
No function
Pan reset
Tilt reset
Color wheel reset
Gobo wheel reset
Gobo rotation reset
Prism reset
Focus reset
All reset
Iris reset
No function
Pan/Tilt movement ramp speed, increase on
7 Shutter
Rogue R1X Spot User Manual Rev. 3 -21-
004ó007
008ó076
077ó145
146ó215
Open
Slow to fast
Pulse effect from slow to fast
Random effect from slow to fast
Page 26
16CH
000ó006
192ó255
Open
Counter-clockwise color scroll, slow to fast
000ó007
192ó255
Open
Counter-clockwise gobo scroll, slow to fast
000ó063
232ó255
Gobo index
Boomerang effect, slow to fast
Operation
DMX Values (Cont.)
Channel Function Value Percent/Setting
(Cont.)
8 Color Wheel
007ó013
014ó020
021ó027
028ó034
035ó041
042ó048
049ó055
056ó063
064ó127
128ó191
Red
Orange
Green
Yellow
Blue
CTO 3200 K
Magenta
Purple
Split colors
Clockwise color scroll, slow to fast
9 Gobo Wheel 1
10 Gobo Wheel 1 Rotate
008ó015
016ó023
024ó031
032ó039
040ó047
048ó055
056ó063
064ó119
120ó127
128ó191
064ó147
148ó231
Gobo 1
Gobo 2
Gobo 3
Gobo 4
Gobo 5
Gobo 6
Gobo 7
Gobo shake 1–7, slow to fast
Open
Clockwise gobo scroll, slow to fast
Clockwise rotation, slow to fast
Counter-clockwise rotation, slow to fast
-22- Rogue R1X Spot User Manual Rev. 3
Page 27
DMX Values (Cont.)
16CH
000ó006
192ó255
Open
Counter-clockwise gobo scroll, slow to fast
12
Focus
000ó255
0–100%
000ó004
005ó255
No function
Prism insert
000ó127
194ó255
Prism index
Clockwise rotation, slow to fast
000ó063
192ó255
Wide to narrow
Iris effect, out slow, in fast
000ó007
248ó255
No function
Pan/Tilt movement ramp speed, increase off
Channel Function Value Percent/Setting
(Cont.)
11 Gobo Wheel 2
13 Prism
007ó013
014ó020
021ó027
028ó034
035ó041
042ó048
049ó055
056ó063
064ó120
121ó127
128ó191
Operation
Gobo 1
Gobo 2
Gobo 3
Gobo 4
Gobo 5
Gobo 6
Gobo 7
Gobo 8
Gobo shake 1–8, slow to fast
Open
Clockwise gobo scroll, slow to fast
14 Prism Rotate
15 Iris
16 Control
128ó189
190ó193
064ó127
128ó191
008ó015
016ó023
024ó031
032ó039
040ó047
048ó055
056ó095
096ó103
104ó111
112ó119
120ó127
128ó135
136ó143
144ó151
152ó159
160ó167
168ó239
240ó247
Counter-clockwise rotation, fast to slow
Stop
Iris effect, slow to fast
Iris effect, in slow, out fast
Blackout during pan/tilt (3 sec hold)
Blackout while color wheel moving (3 sec hold)
Blackout while gobo wheels moving (3 sec hold)
Disable pan/tilt blackout (3 sec hold)
Disable color wheel blackout (3 sec hold)
Disable gobo wheel blackout (3 sec hold)
No function
Pan reset
Tilt reset
Color wheel reset
Gobo wheel reset
Gobo rotation reset
Prism reset
Focus reset
All reset
Iris reset
No function
Pan/Tilt movement ramp speed, increase on
Rogue R1X Spot User Manual Rev. 3 -23-
Page 28
Product
To maintain optimum performance and minimize wear, you should clean this product
frequently. Usage an d environment are contributing f actors in determining the cleaning
light output
performance and can c ause overheating. This can lead to reduced light source life and
7. Gently polish the lens surfaces until they are free of haze and lint.
Technical Information
5. TECHNICAL INFORMATION
Maintenance
frequency.
As a rule, clean th is product at least twice a m onth. Dust build-up reduces
increased mechanical wear.
To clean your product:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
the external vents.
4. Clean all external surfaces with a mild solution of non-ammonia glass cleaner or
isopropyl alcohol.
5. Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
6. Wipe any dirt or grime to the outside edges of the lens surface.
Always dry the external surfaces thoroughly and carefully after cleaning them.
Do not allow the cooling fans to spin while blowing compressed air into the fixture.
-24- Rogue R1X Spot User Manual Rev. 3
Page 29
6. TECHNICAL SPECIFICATIONS
Dimensions and
11.1 in (282 mm)
14.2 in (360 mm)
17.6 in (447 mm)
37.6 lb (17.1 kg)
Note: Dimensions in inches rounded to the nearest hundredth.
Power
Power Supply Type
Range
Voltage Selection
Switching (internal)
100–240 VAC, 50/60 Hz
Auto-ranging
Consumption
319 W
297 W
Current
2.7 A
1.3 A
Power linking current
(products)
13.6 A (5 products)
13.6 A (10 products)
Fuse
F 4 A, 250 V
F 4 A, 250 V
Power I/O
U.S./Canada
Worldwide
Power input connector
Neutrik® powerCON® A
Neutrik® powerCON® A
Power cord plug
Edison (U.S.)
Local plug
Light Source
Type
Power
Lifespan
LED
170 W
50,000 hours
Photometrics
Parameter
Standard Optics
Illuminance @ 5 m
4,620 lux
Beam angle
16°
Gobo Dimensions
Outside Diameter
Diameter
Thickness
26.9 mm (Aluminum)
22.5 mm (Aluminum)
0.5 mm (Aluminum)
25 mm (Glass)
23 mm (Glass)
1.1–3.0 mm (Glass)
Thermal
Max. External Temperature
Cooling System
113 °F (45 °C)
Fan-Cooled
DMX
I/O Connectors
Connector Type
Channel Range
3- and 5-pin XLR
Sockets
16 or 19
Ordering
ROGUER1XSPOT
08011396
781462217440
Technical Specifications
Weight
Length Width Height Weight
Parameter 120 VAC, 60 Hz 230 VAC, 50 Hz
Gobo Wheel 1
Image
Max.
Product Name Item Code UPC Number
Rogue R1X Spot User Manual Rev. 3 -25-
Page 30
Photometrics
Chart
Technical Information
-26- Rogue R1X Spot User Manual Rev. 3
Page 31
Returns
You must send the pro duct prepai d, in the orig inal box , an d w ith t he ori ginal pack ing and
and request a Return Merchandise Authorization (RMA) number before
shipping the prod uct. Be prepared to provide th e model number, serial number, an d a
without an RMA number.
DO NOT write the RMA number directly on the box. Instead, write it on a properly
affixed label.
Once you have received th e R MA number, include the f ollowing i nf ormation on a piece of
Be sure to pack the product properly. Any shipping dam age resulting from inadequate
recommended.
Chauvet reserves the right to use its own discretion to repair or replace returned
product(s).
Technical Information
accessories. Chauvet will not issue call tags.
Call Chauvet
brief description of the cause(s) for the return.
Clearly label the p ackage with an RMA number. Chauvet will refuse any pr oduct returned
paper inside the box:
• Your name
• Your address
• Your phone number
• The RMA number
• A brief description of the problem(s)
packaging will be the customer’s responsibility. FedEx packing or double-boxing is
Rogue R1X Spot User Manual Rev.1 -27-
Page 32
C
WORLD HEADQUARTERS - Chauvet
General Information
Toll free: (800) 762-1084
Technical Support
World Wide Web www.chauvetlighting.com
EUROPE - Chauvet Europe Ltd.
General Information
Fax: +44 (0)1773 511110
Technical Support
General Information
Voice: +32 9 388 93 97
Technical Support
MEXICO - Chauvet Mexico
General Information
Voice: +52 (728) 690-2010
Technical Support
Outside the U.S., U nited Kingdom, Ireland, Mexico, o r Benelux contact the dealer of rec ord.
details.
User Manual
ONTACT
US
Address: 5200 NW 108th Avenue
Sunrise, FL 33351
Voice: (954) 577-4455
Fax: (954) 929-5560
Address: Unit 1C
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK
NG16 6NT
Voice: +44 (0)1773 511115
Address: Stokstraat 18
9770 Kruishoutem
Belgium
Address: Av. de las Parti das 34 – 3B,
(Entrance by Calle 2)
Zona Industrial Lerm a
Lerma Edo. de Mexico, C.P. 52000
Voice: (844) 393-7575
Fax: (954) 756-8015
Email: chauvetcs@chauvetlighting.com
Email: uktech@chauvetlighting.com
World Wide Web
www.chauvetlighting.co.uk
Email: Eutech@chauvetlighting.eu
World Wide Web www.chauvetlighting.eu
Email: servicio@chauvet.com.mx
World Wide Web www.chauvet.com.mx
Follow their instruc tions to reques t support or to return a prod uct. Visit our website for contact
Rogue R1X Spot User Manual Rev. 3
Loading...