Chauvet Pro Reve E3 User guide

User Manual

Model ID: OVATIONREVEE3

Edition Notes

The Ovation Rêve E-3 User Manual includes a description, safety precautions, installation, programming,
operation, and maintenance instructions for the Ovation Rêve E-3.

Trademarks

Chauvet, the Chauvet logo, Ovation, and Ovation Rêve E-3 are registered trademarks or trademarks of
Chauvet & Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries.
Other company and product names and logos referred to herein may be trademarks of their respective
companies.

Copyright Notice

The works of authorship contained in this manual, including, but not limited to, all designs, text, and images
are owned by Chauvet.

© Copyright 2023 Chauvet & Sons, LLC. All rights reserved.

Electronically published by Chauvet in the United States of America.

Manual Use

Chauvet authorizes its customers to download and print this manual for professional information purposes
only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this
manual or its content for any other purpose without written consent from Chauvet.

Document Printing

For best results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4
paper (210 x 297 mm), configure the printer to scale the content accordingly.

Intended Audience

Any person installing, operating, and/or maintaining this product should completely read through the guide
that shipped with the product, as well as this manual, before installing, operating, or maintaining this
product.

Disclaimer

Chauvet believes that the information contained in this manual is accurate in all respects. However,
Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,
damage or disruption caused by any errors or omissions in this document, whether such errors or
omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the
content of this document without any obligation to notify any person or company of such revision, however,
Chauvet has no obligation to make, and does not commit to make, any such revisions.

Document Revision

Go to www.chauvetprofessional.com for the latest version.

Revision Date Description

8 11/2023 Added verbiage for effectiveness and useful life of the Soft Focus Filter.

Ovation Rêve E-3 User Manual Rev. 8

Table of Contents

TABLE OF CONTENTS

1. Before You Begin ....................................................................... 1

What Is Included ........................................................................................... 1

Claims ........................................................................................................... 1

Manual Conventions ..................................................................................... 1

Symbols ........................................................................................................ 1

Safety Notes.................................................................................................. 2

FCC Statement of Compliance ..................................................................... 3

RF Exposure Warning for North America and Australia................................ 3

Expected LED Lifespan................................................................................. 3

2. Introduction ................................................................................ 4

Features........................................................................................................ 4

Product Overview.......................................................................................... 5

Product Dimensions ...................................................................................... 6

3. Setup ........................................................................................... 7

AC Power...................................................................................................... 7

AC Plug .......................................................................................................................... 7

Power Linking................................................................................................................. 7

Fuse Replacement ......................................................................................................... 7

DMX Linking.................................................................................................. 8

DMX Personalities.......................................................................................................... 8

Remote Device Management......................................................................................... 8

Master/Slave Connectivity............................................................................. 8

USB Software Update ................................................................................... 9

Force Upload................................................................................................. 9

Mounting ....................................................................................................... 10

Orientation...................................................................................................................... 10

Rigging ........................................................................................................................... 10

Procedure....................................................................................................................... 10

Adjustable Yoke ............................................................................................ 11

Soft Focus Filter............................................................................................ 12

Lens Tubes ................................................................................................... 12

4. Operation .................................................................................... 13

Control Panel Operation................................................................................ 13

Control Options ............................................................................................. 13

Programming................................................................................................. 13

DMX Configuration........................................................................................ 13

DMX Personalities.......................................................................................................... 13

Starting Address............................................................................................................. 13

Menu Map ..................................................................................................... 14

Standalone Configuration.............................................................................. 17

Virtual Color Wheel ........................................................................................................ 17

Color Temperature ......................................................................................................... 17

Manual Color Mixer ........................................................................................................ 17

Color X-Fade Speed ...................................................................................................... 17

Auto Programs ............................................................................................................... 17

Red Shift ........................................................................................................................ 17

Master/Slave .................................................................................................................. 17

Dimmer Curve ................................................................................................................ 18

Dimmer Profiles.............................................................................................................. 18

Color Calibration ............................................................................................................ 18

LED Frequency .............................................................................................................. 18

Ovation Rêve E-3 User Manual Rev. 8

i

Table of Contents

Fan Mode ....................................................................................................................... 18

Back Light ...................................................................................................................... 18

System Information ........................................................................................................ 18

Virtual Color Wheel ....................................................................................... 19

Virtual Color Wheel Chart .............................................................................................. 19

Color Temperature Chart ............................................................................................... 20

Color Temperature DMX Chart ...................................................................................... 20

DMX Values .................................................................................................. 21

18Ch / 14Ch1 / 14Ch2 / 12Ch........................................................................................ 21

8Ch / 6Ch / 5Ch / 1Ch.................................................................................................... 22

HSV................................................................................................................................ 22

5. Technical Information ................................................................ 23

Product Maintenance .................................................................................... 23

6. Technical Specifications ........................................................... 24

Contact Us ...................................................................................... 25

Warranty & Returns....................................................................................... 25

ii

Ovation Rêve E-3 User Manual Rev. 8

Before You Begin

1. Before You Begin

What Is Included

• Ovation Rêve E-3

• Seetronic Powerkon IP65 power cable

• Ovation metal gobo holder

Claims

Carefully unpack the product immediately and check the container to make sure all the parts are in the
package and are in good condition.

If the box or the contents (the product and included accessories) appear damaged from shipping, or show
signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier
immediately may invalidate customer’s claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed
damage, file a claim with Chauvet within 7 days of delivery.

Manual Conventions

Convention Meaning

1–512 A range of values

50/60 A set of values of which only one can be chosen

<SET> A button on the product’s control panel

Settings A product function or a menu option

Symbols

• Soft focus filter

• Quick Reference Guide

Symbol Meaning

Critical installation, configuration, or operation information. Not following these
instructions may make the product not work, cause damage to the product, or cause
harm to the operator.

Important installation or configuration information. The product may not function correctly
if this information is not used.

Useful information.

Any reference to data or power connections in this manual assumes the use of Seetronic
IP rated cables.

The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data
transmission protocol.

Ovation Rêve E-3 User Manual Rev. 8

1

Before You Begin

Safety Notes

Read all the following safety notes before working with this product. These notes contain important
information about the installation, usage, and maintenance of this product.

This product contains no user-serviceable parts. Any reference to servicing in this User
Manual will only apply to properly trained, certified technicians. Do not open the housing
or attempt any repairs.

All applicable local codes and regulations apply to proper installation of this product.

• The luminaire is intended for professional use only.

• The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than
10 ft (3 m) is not expected.

• If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by a special cord
or cord exclusively available from the manufacturer or its service agent.

• The light source contained in this luminaire shall only be replaced by the manufacturer or its service
agent or a similar qualified person.

• CAUTION:

• This product’s housing may be hot when operating. Mount this product in a location with adequate

ventilation, at least 20 in (50 cm) from adjacent surfaces.

• When transferring the product from extreme temperature environments, (e.g., cold truck to warm

humid ballroom) condensation may form on the internal electronics of the product. To avoid causing
a failure, allow the product to fully acclimate to the surrounding environment before connecting it to
power.

• Flashing light is known to trigger epileptic seizures. User must comply with local laws regarding

notification of strobe use.

• ALWAYS:

• Disconnect from power before cleaning the product or replacing the fuse.

• Replace the fuse with the same type and rating.

• Use a safety cable when mounting this product overhead.

• Connect this product to a grounded and protected circuit.

•DO NOT:

• Open this product. It contains no user-serviceable parts.

• Look at the light source when the product is on.

• Leave any flammable material within 1.64 ft (50 cm) of this product while operating or connected to

power.

• Connect this product to a dimmer or rheostat.

• Operate this product if the housing, lenses, or cables appear damaged.

• Operate this product outdoors or in any location where dust, exce s sive heat, w ater, or hum i dity may

affect it (adhere to standards for the published IP rating).

• ONLY use the hanging/mounting bracket to carry this product.

• The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher
temperatures.

• The minimum startup temperature is -14°F (-10°C). Do not start the product at lower temperatures.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.

• In the event of a serious operating problem, stop using immediately.

If a Chauvet product requires service, contact Chauvet Technical Support.

2

Ovation Rêve E-3 User Manual Rev. 8

Before You Begin

FCC Statement of Compliance

This device complies with Part 15 Part B of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause

undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.

RF Exposure Warning for North America and Australia

Warning! This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20 cm between
the radiator and the user. This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.

Expected LED Lifespan

Over time, use and heat will gradually reduce LED brightness. Clustered LEDs produce more heat than
single LEDs, contributing to shorter lifespans if always used at full intensity. The average LED lifespan is
40,000 to 50,000 hours. To extend LED lifespan, maintain proper ventilation around the product, and limit
the overall intensity.

Ovation Rêve E-3 User Manual Rev. 8

3

Introduction

2. Introduction

Description

Ovation Rêve E-3 is the brightest, multi-color LED ellipsoidal that also has the capability of producing
perfectly tunable whites. It’s a new kind of epic story-telling machine that fuses the best of both worlds into
one totally reimagined LED light source. Color Temperature presets ranging from 2800K to 8000K maintain
outstanding brightness and a high quality of light, with an emulated “red shift” for a tungsten feel. Ovation
Rêve E-3 also features several dimming curves, a virtually silent operation with fan-off modes, and a series
of technician-friendly features such as an innovative, adjustable yoke that makes mounting in low
clearance situations a breeze. The Ovation Rêve E-3 can seamlessly transition from captivating a wide
range of saturated colors in class-leading output to distinct whites with +/- green adjustments using one
fixture. No ifs or buts. Simply and categorically unrivaLED.

Features

• Operating modes:

• HSV: hue, saturation, value control, gobo rotator

• 1-channel: dimmer

• 5-channel: dimmer, virtual color wheel (VCW), color temperature, hue, gobo rotator

• 6-channel: red, green, blue, amber, mint (RGBAM) control, gobo rotator

• 8-channel: dimmer,

• 12-channel: 16-bit dimmer, RGBAM control, strobe, VCW, color temperature, hue, gobo rotator

• 14-channel: dimmer, RGBAM control, strobe, VCW, color temperature, hue, auto programs,
auto speed, control, gobo rotator

• 14-channel: 16-bit dimmer, 16-bit RGBAM control, strobe, gobo rotator

• 18-channel: 16-bit RGBAM and dimmer, strobe, VCW, color temperature, hue, control, gobo rotator

• Full-spectrum LED ERS-style lighting fixture for theatre, film and production

• Linear color temperature presets from 2800 K to 8000 K with high CRI and CQS

• Virtual color wheel with color matched to popular gel colors

• +/- Green adjustment and emulated red-shift via DMX or on-board control

• RDM (Remote Device Management) for added flexibility

• Adjustable PWM (Pulse Width Modulation) to avoid flickering on camera

• Virtually silent operation for use in studio, film and theatre applications

• Ultra-smooth 16-bit dimming curves and speeds to complement any lighting scheme.

• Innovative adjustable yoke for mounting in low clearance areas

• Direct power/data connection and control options for the Ovation GR-1 gobo rotator

• USB port for fixture software updates

RGBAM control, strobe, gobo rotator

4

Ovation Rêve E-3 User Manual Rev. 8

Control

panel

Fuse

Power in

Power out

Handle /

Mounting

bracket

Menu buttons

3- and 5-pin
DMX out

3- and 5-pin
DMX in

USB port

Framing shutters (x4)

Lens tube

(sold separately)

Bracket

adjustment

knobs (x2)

Beam focus

knobs (x2)

Safety loop

Introduction

Product Overview

Ovation Rêve E-3 User Manual Rev. 8

5

Product Dimensions

19.75 in

(501 mm)

26.83 in

(681 mm)

20.44 in

(519 mm)

10.71 in

(272 mm)

13.07 in

(332 mm)

Introduction

6

Ovation Rêve E-3 User Manual Rev. 8

Setup

!

!

3. Setup

AC Power

Each Ovation Rêve E-3 has an auto-ranging power supply that works with an input voltage range of 100 to
240 V~, 50/60 Hz. To determine the power requirements for each Ovation Rêve E-3, refer to the label
affixed to the product or to the Technical Specifications

The listed current rating indicates the maximum current draw during normal operation. For more
information, download Sizing Circuit Breakers from the Chauvet website: www.chauvetprofessional.com

• Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure

e product has an appropriate electrical ground to avoid the risk of electrocution or fire.

th

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use

completely disconnect the product from power via breaker or by unplugging it.

Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer channel serves only as a 0 to 100% switch.

AC Plug

The Ovation Rêve E-3 comes with a power input cord terminated with a Seetronic Powerkon IP65 connector
on one end and an Edison plug on the other end (U.S. market). If the power input cord that came with the
product has no plug, or if the plug needs to be changed, use the table below to wire the new plug.

Connection Wire (U.S.) Wire (Europe) Screw Color

AC Live Black Brown Yellow or Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green

chart in this manual.

.

Power Linking

It is possible to power link Ovation Rêve E-3 products. See the table below for the current draw at each voltage
and frequency:

100 V, 60 Hz 120 V, 60 Hz 208 V, 60 Hz 230 V, 50 Hz 240 V, 60 Hz

Current Draw 3.68 A 3.04 A 1.76 A 1.59 A 1.52 A

Never exceed 12A on a single circuit. Power-linking cables can be purchased separately.

Fuse Replacement

1. Disconnect this product from the power outlet.

2. Using a Phillips-head screwdriver, unscrew the fuse holder cap from the housing.

3. Remove the blown fuse and replace with another fuse of the same type and rating (T 6.3 A, 250 V).

4. Screw the fuse holder cap back in place and reconnect power.

Make sure to disconnect the product’s power cord before replacing a blown fuse.
Always replace the blown fuse with another of the same type and rating.

Ovation Rêve E-3 User Manual Rev. 8

7

Setup

DMX Linking

The Ovation Rêve E-3 can be linked to a DMX controller using a 3- and 5-pin DMX connection. If using
other DMX-compatible products with this product, it is possible to control each individually with a single
DMX controller.

DMX Personalities

The Ovation Rêve E-3 uses a 3- and 5-pin DMX data connection for the 1Ch, 5Ch, 6Ch, 8Ch, 12Ch,
14Ch1, 14Ch2, 18Ch, and HSV DMX personalities.

• Refer to the Introduction

• Refer to the Operation
personalities.

•The DMX Values

For information about DMX standards, Master/Slave connectivity, or the DMX cables
needed to link this product to a DMX controller, download the DMX Primer from the
Chauvet website: www.chauvetprofessional.com.

section provides detailed information regarding the DMX personalities.

for a brief description of each DMX personality.

chapter to learn how to configure the Ovation Rêve E-3 to work in these

Remote Device Management

Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate
bi-directionally along existing DMX cabling. Check with the manufacturer or the DMX controller’s User
Manual, as not all DMX controllers have this capability. The Ovation Rêve E-3 supports RDM protocol that
allows feedback to make changes to menu map options.

Master/Slave Connectivity

The Master/Slave mode allows an Ovation Rêve E-3 (the master) to control one or more Ovation Rêve E-3
products (the slaves) without a DMX controller. Once Ovation Rêve E-3 becomes the master when running
an auto or custom program, or in Static mode.

Each slave’s control panel must be configured to operate in Slave mode. During Master/Slave operation,
the slaves will operate in unison with the master.

DO NOT connect a DMX controller to products operating in Master/Slave mode. The
DMX controller signals may interfere with the signals from the master.

•The Operation section of this manual provides detailed instructions on how to
configure the master and slaves.

• For more information about DMX standards or the DMX cables needed to link this
product to a DMX controller, download the DMX primer from the Chauvet website:

www.chauvetprofessional.com.

8

Ovation Rêve E-3 User Manual Rev. 8

Setup

USB Software Update

The Ovation Rêve E-3 allows for software updates with a USB device using the built-in USB port. To
update the software using a USB flash drive, do the following:

1. Power on the product, and plug the flash drive into the USB port.

2. Once the flash drive has been detected, the message “Upgrade Firmware” will be displayed.
Press <ENTER>. If a different message appears on the display, search for the updated software in
the main menu (Update Firmware) and select from Only This Unit, Multiple Fixture, or Other
Fixture Type. A list of the updated software files will be displayed.

3. Select the file that needs to be uploaded. The message “Are you sure?” will be displayed.
Press <ENTER>.

If the selected file is incorrect, the upgrade will fail, and the display will go back to the
main interface. Repeat steps 1–3 using the correct file.

4. If the selected file is correct, the upgrade will start. DO NOT turn off the power or disconnect the
USB during the process. USB update can take several minutes to complete.

5. When the update is completed, the fixture will automatically reboot.

6. Go to Fixture Information on the product’s menu map and confirm the firmware revision.

7. When the boot-up process is finished, restart the product.

• Place the .chl file in the root directory of the USB drive.

• The product's USB port supports up to 32GB capacity and only works with FAT32 file format.

The “Other Fixture Type” option can only be selected for connected products compatible
with the Upload 03 (the first 2 digits of the item code must be 03).

Turning off the power, removing the USB, or not setting the fixture to the correct protocol
during the update can cause partial or total firmware failure in the targeted fixture(s).
Please refer to Force Upload

section to fix firmware failure issues.

Force Upload

A Force Upload is done whenever a software update fails due to accidental removal of the USB flash drive,
incorrect control protocol, or loss of power during a regular software update process.

• A Force Upload process requires a target fixture (the fixture that needs a Force Upload
and a main fixture (the fixture that controls the upload process).

•

The Force Upload process can only be done one target fixture at a time

To do a Force Upload, follow the instructions below:

1. Link the target fixture to the main fixture via a DMX 5-pin connection. Ensure that the target fixture
is turned off.

2. Turn on the main fixture and set its protocol to DMX512.

3. Plug the flash drive into the USB-C port of the main fixture.

4. Go to Upgrade Firmware on the menu map.

5. Choose between Multiple Fixture and Other Fixture Type. Press <ENTER>.

• Multiple Fixture: Both the target fixture and main fixture are from the same product line

(e.g., 2 Ovation Rêve E-3 fixtures).

• Other Fixture Type: The target fixture and main fixture are from different product series

(e.g., a Ovation Rêve E-3 as the target fixture and a Maverick Silens 2 Profile as the main fixture).

6. Select the file that needs to be uploaded. The message “Are you sure?” will appear on the
screen. Press <ENTER>. Turn on the target fixture within 1–2 seconds of pressing <ENTER>. The
display on the target fixture should remain off.

a. The main fixture will show the update progress (0–100%).

The target fixture’s display will turn on, and a notification “

b.

<UPDATE>

” will appear on the screen.

.

The timing of when the target fixture’s display will turn on varies from fixture to fixture.

7. DO NOT turn off power or remove the USB flash drive. Once the software is done uploading, the
target fixture will automatically reboot.

8. Go to the target fixture’s main menu and confirm that the firmware version has been updated.

9. Reboot the target fixture.

Ovation Rêve E-3 User Manual Rev. 8

9

Setup

Safety cable

Mounting clamp

Overhead Mounting

Mounting bracket

* Lens tubes sold separately

Secure the safety cable using
the passageway on the top of
the product

Mounting

Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
For Chauvet Professional line of mounting clamps, go to: http://trusst.com/products/

Orientation

Always mount this product in a safe position, ensuring that there is adequate room for ventilation,
configuration, and maintenance.

Rigging

Chauvet recommends using the following general guidelines when mounting this product:

• Before deciding on a location for the product, always make sure there is easy access to the product
for maintenance and programming.

• Make sure that the structure and attachment points can support the weight before hanging the
product (see the Technical Specifications

• When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.

• When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.

• When power linking multiple products, mount the products close enough for power-linking cables to reach.

• The bracket adjustment knobs allow for directional adjustment when aiming the product to the desired
angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the knobs.

).

Procedure

The Ovation Rêve E-3 comes with a double-bracketed yoke that can be used as a floor stand or to which
mounting clamps can be attached for hanging. Mounting clamps must be purchased separately. Ensure that the
clamps can support the weight of this product. Use at least one mounting point per product where necessary.

Mounting Diagram

.

10

Ovation Rêve E-3 User Manual Rev. 8

Setup

1

2

3

Adjustable Yoke

The Ovation Rêve E-3 comes with an adjustable yoke for mounting in low-clearance areas. To modify the
height of the yoke, do the following:

1. Loosen the bracket adjustment knobs on both sides of the fixture.

2. On each side of the fixture, remove the two screws and loosen the bolt attaching the plate to the

mounting bracket.

3. Using the screw holes as guide, adjust the position of the mounting bracket to achieve the desired

height of the yoke.

4. Put the screws back in place, and tighten the bolts and the bracket adjustment knobs.

Ovation Rêve E-3 User Manual Rev. 8

11

Setup

Soft focus filter

Filter holder (x4)

Soft Focus Filter

The version 2 of the Ovation Rêve E-3 comes with the soft focus filter already pre-installed in the shutter
barrel, in front of the shutter blades and is being held by four filter holders.

• To remove the soft focus filter, gently squeeze and slide the filter out from under the four filter holders.

• To replace the soft focus filter into the fixture, gently squeeze the filter and carefully slide it back
under the filter holders. Make sure to follow the orientation direction printed on the filter.

To keep the soft focus filter in good condition:

• Ensure that no fingerprints are left on the filter, as this may cause the filter to heat unevenly and
eventually warp.

• When inserting shutter blades into the light path, note that the heat is reflected back at the filter. The
deeper the blades are inserted, and the longer the fixture runs, the more heat gets reflected on to
the filter, causing it to warp and potentially adhere to the shutter blades.

• If there is a protective film on the soft focus filter, it must be removed before use.

• The standard filter frame must be used together with the fixture.

The lifespan and effectiveness of the Soft Focus Filter accessory included with this
product will be negatively impacted by excessive reflected heat caused by the extended
use of gobos, shutters, irises, and other beam shaping accessories. The filter is not
covered by the limited warranty. Replacements are available for purchase.

Lens Tubes

The following lens tubes are available for purchase:

• 19°, 26°, 36°, and 50° with gel frame (6.25 in/159 mm accessories)

• 5° gel frame (14 in/356 mm)

• 10° gel frame (12 in/304 mm)

• 14°, 15–30° and 25°–50° zoom gel frame (7.5 in/191 mm accessories)v

12

Ovation Rêve E-3 User Manual Rev. 8

Operation

4. Operation

Control Panel Operation

Button Function

<MENU>

<ENTER>

<UP>

<DOWN>

Control Options

Set the Ovation Rêve E-3 starting address in the 001-512 DMX range. This enables control of up to 8
products in the 18-channel personality.

Programming

Refer to the Menu Map to understand the menu options. The menu map shows the main level and a
variable number of programming levels for each option.

• To go to the desired main level, press <MENU> repeatedly until the option shows on the display.
Press <ENTER> to select. This will show the first programming level for that option.

• To select an option or value within the current programming level, press <UP> or <DOWN> until
the option shows on the display. Press <ENTER> to select. This will show either the first option if
there is another programming level, or the selected value.

• Press <MENU> repeatedly to exit to the previous main level.

Exits from the current menu or function
Enables the currently displayed menu or sets the currently selected value in to the current

function
Navigates upward through the menu list or increases the numeric value when in a function
Navigates downward through the menu list or decreases the numeric value when in a

function

DMX Configuration

Use DMX configurations to operate the product with a DMX controller.

DMX Personalities

This setting allows the user to choose a particular DMX personality.

1. Go to the DMX Channel main level.

2. Select the desired personality (1Ch, 5Ch, 6Ch, 8Ch, 12Ch, 14Ch1, 14Ch2, 18Ch, and HSV).

•See the Starting Address section for the highest starting address suggested for each
personality.

• Make sure that the starting addresses on the various products do not overlap due to
the new personality setting.

Starting Address

In this mode, each product will respond to a unique starting address from the DMX controller. All products
with the same starting address will respond in unison.

1. Go to the DMX Address main level.

2. Set the starting address (001–512).

The highest recommended starting address for each DMX mode is as follows:

DMX Personality DMX Address DMX Personality DMX Address

HSV 509 8Ch 505

1Ch 512 12Ch 501
5Ch 508 14Ch 499
6Ch 507 18Ch 495

Ovation Rêve E-3 User Manual Rev. 8

13

Operation

Menu Map

Refer to the Ovation Rêve E-3 product page on www.chauvetprofessional.com for the latest menu map.

Main Level Programming Levels Description

DMX

Address

DMX

Channel

Virtual

Color

Wheel

1Ch

Virtual Color

Wheel

001–512*

Virtual Color Wheel

Color Temperature

Manual Color Mixer

5Ch

6Ch

8Ch

12Ch

14Ch1

14Ch2

18Ch

HSV

C3050 - Md Yellow
C3040 - Lt Yellow
C3240 - Amb Yellow
C2340 - VLt Amber
C2040 - Lt Amber
C2050 - Md Amber
C2060 - Dk Amber
C1050 - Lt Red
C1080 - Md Red
C1020 - NC Pink
C1030 - Md Pink
C1630 - Dk Pink
C1250 - Md Red Amber
C1060 - Dk Red Amber
C1650 - Magenta
C6170 - Dk Magenta
C6020 - Lt Lavender
C5030 - Lt Blue
C5020 - VLt Blue
C5430 - Lt Blue 2
C5070 - Blue
C5050 - Md Blue
C5060 - Dk Blue
C5690 - Indigo
C5080 - VDk Blue
C5081 - VDk Blue 2
C4370 - Yel Green
C4070 - Green
C4550 - Turquoise
C4560 - Aqua
C4570 - Blue Green

Dimmer

0–255

Selects DMX address (*highest channel
restricted to personality chosen)

1-channel: dimmer

5-channel: dimmer, virtual color wheel
(VCW), color temperature, hue, gobo rotator

6-channel: red, green, blue, amber, mint,
gobo rotator

8-channel: dimmer, RGBAM, strobe,
gobo rotator

12-channel: 16-bit dimmer, RGBAM,
strobe, VCW, color temperature, hue,
gobo rotator

14-channel: dimmer, RGBAM, strobe,
VCW, color temperature, hue, auto
programs, auto speed, control, gobo rotator

14-channel:
RGBAM, strobe, gobo rotator

18-channel: 16-bit RGBAM and dimmer,
strobe, VCW, color temperature, hue,
control, gobo rotator

4-channel: hue, saturation, value,
gobo rotator

Virtual Color Wheel simulates the output
of each gel color. Refer to the Virtual

Color Wheel Chart for specific values.

16-bit dimmer, 16-bit

14

Ovation Rêve E-3 User Manual Rev. 8

Operation

Main Level Programming Levels Description

2800K
2900K
3000K
3100K
3200K
3300K
3400K
3500K
3600K
3700K
3800K
3900K
4000K
4100K
4200K
4300K

Color

Tem perature

Virtual

Color

Wheel

Manual

Color Mixer

Color X-

Fade Speed

Auto Show Auto 1–5 1–100

Red Shift

Gobo

Rotator

Master/

Slave

4400K
4500K
4600K
4700K
4800K
4900K
5000K
5100K
5200K
5300K
5400K
5500K
5600K
5700K
6000K
6500K
7000K
7500K
8000K

000–255 Controls the gobo rotator

Master

Slave

Dimmer 0–255

Preset white color temperatures.
Emulates a tungsten lamp at the
specified color temperature. Refer to the

Color Temperature Chart

values.

Hue -25–25

Red

Green

Blue

Amber

Mint

Off
X-Fade Speed 1 Creates fade transition between colors
X-Fade Speed 2
X-Fade Speed 3

X-Fade Speed 4

On
Off

000–255

Combines red, green, blue, amber, and
mint to make a custom color (0–100%)

Turns off the fade transition between colors

when using colors in the Virtual Color
Wheel or Color Temperature chart, from
fast (X-Fade Speed 1) to slow (X-Fade
Speed 4)

Selects automatic programs and auto
program speed

Mimics halogen lamp dimming

Receives DMX signal from the DMX
controller (master)

Receives DMX signal from the master
unit

for specific

Ovation Rêve E-3 User Manual Rev. 8

15

Main Level Programming Levels Description

!

SCurve

Dimmer

Curve

Dimmer

Mode

Color

Calibration

LED

Frequency

Fan Mode

Back Light

Gobo

Power

Information

Update

Firmware

Reset

Factory

User

Calibration

Factory Calibration Uses factory default white setting

Fixture Hours _ _ _ _H

LED Hours _ _ _ _H

Version V_._ Shows current firmware version

UID _ _ _ _ _ _ _ _ _ _ _ _ Shows product UID

Only This Unit

Multiple Units

Other Fixture Type

Linear

Square

Inverse Square

Off Linear dimmer

Dimmer 1–3

Off

Red

Green Sets green LED maximum value

Blue Sets blue LED maximum value

Amber Sets amber LED maximum value

Mint Sets mint LED maximum value

600Hz
1200Hz
2000Hz
4000Hz
6000Hz

25KHz

Auto Sets the fan to auto mode

On Sets the fan to always on
Off Sets the fan to always off

Silent Sets the fan to silent

10S

30S

2Min

Always On Display backlight always on

On
Off

_ _ _ _ _ _.CHL

_ _ _ _ _ _.CHL

_ _ _ _ _ _.CHL Selects an update file for other

No

Yes

125–255

...

...

...

Sets the dimmer curve

Dimming curves, from fast (
slow (

Dimmer 3

Deactivates color calibration
Sets red LED maximum value

Sets the PWM output frequency

Turns off display backlight after 10 seconds
of inactivity

Turns off display backlight after 30 seconds
of inactivity

Turns off display backlight after 2 minutes
of inactivity

Enables/disables gobo power output

Shows total hours the product has been
powered on

Shows total hours the LED has been
powered on

Selects an update file for this product, or
shows “No such file!”

Selects an update file for this and
connected Ovation Rêve E-3 products, or
shows “

connected products, or shows “No such
file!”

Resets settings to factory default

No such file!

Operation

)

Dimmer 1

”

) to

WARNING: When operating in Fan Mode: Off and Fan Mode: Silent, the fixture will
become hotter to the touch than when using other fan modes. Use proper protective
equipment to prevent burns. Keep a safe distance from flammable objects.

NOTICE: When operating in Fan Mode: Off and Fan Mode: Silent, output of the fixture
will be reduced and will not reach the same levels as when using other fan modes.

16

Ovation Rêve E-3 User Manual Rev. 8

Operation

Standalone Configuration

Use standalone configuration to operate the product without a DMX controller.

Virtual Color Wheel

1. Go to the Virtual Color Wheel main level.

2. Select Virtual Color Wheel.

3. Select the desired gel color (see Virtual Color Wheel Chart

4. Select the desired output level (000–255).

Color Temperature

To select a color temperature, do the following:

1. Go to the Virtual Color Wheel main level.

2. Select Color Temperature.

3. Select the desired color temperature (see Color Temperature Chart

4. Select the desired output level (000–255).

Manual Color Mixer

To do color mixing without a DMX controller, follow the instructions below:

1. Go to the Virtual Color Wheel main level.

2. Select Manual Color Mixer.

3. Select the color to edit (Red, Green, Blue, Amber, or Mint).

4. Select the desired output level for that color (000–255).

5. Repeat steps 3 and 4 until product outputs as desired.

Color X-Fade Speed

To create fade transition between colors when using colors in the Virtual Color Wheel or Color
Temperature Chart, do the following:

1. Go to the Virtual Color Wheel main level.

2. Select Color X-Fade Speed.

3. Select

X-Fade Speed 1-4

(from fast to slow), or

Off

(to turn off the fade transition between colors).

Auto Programs

Auto programs allow for dynamic RGBAL color mixing without a DMX controller.

1. Go to Auto Show main level.

2. Select the desired auto program (Auto 1–5).

3. Select the desired speed (1–100).

Red Shift

The Red Shift function causes the amber LEDs to imitate the appearance of a halogen lamp when dimming.
To adjust the Red Shift function, do the following:

1. Go to the Red Shift main level.

2. Select On or Off.

Master/Slave

The Master/Slave mode allows a group of Ovation Rêve E-3 products (the slaves) to simultaneously
duplicate the output of another Ovation Rêve E-3 (the master) without a DMX controller.
To set each of the slaves:

1. Go to the Master/Slave main level

2. Select Slave.

To set the master:

1. Go to the Master/Slave main level

2. Select Master.

3. Select a static setting.

• The master is the one that runs a program whether in Auto or Static mode.

• Do not connect a DMX controller to the products configured for Master/Slave
operation. The DMX controller may interfere with signals from the master.

• The master should be the first product in the daisy chain.

).

).

Ovation Rêve E-3 User Manual Rev. 8

17

Operation

!

!

Dimmer Curve

To set the dimmer curve, follow the instructions below:

1. Go to the Dimmer Curve main level.

2. Select the desired option (SCurve, Linear, Square, or Inverse Square).

Dimmer Profiles

This setting determines how fast the output of the Ovation Rêve E-3 changes when the output value is
modified. It provides four different options to simulate the dimming curve of an incandescent lighting product.
To select a specific dimmer profile, do the following:

1. Go to the Dimmer Mode main level.

2. Select a dimmer curve (Off, Dimmer 1, Dimmer 2, or Dimmer 3).

Off: The output is proportional (linear) to the dimmer channel value.
Dimmer 1-3: The output follows the dimmer value based on the corresponding dimmer
curve, Dimmer 1 being the fastest.

For optimum control of the 16-bit dimming channels in the 12Ch, 14Ch2, and 18Ch
personalities, ensure that the dimming curves in Dimmer Mode are set to Off.

Color Calibration

This setting determines the maximum output values for each color, which affects the appearance of a full
output white.

1. Go to the Color Calibration main level.

2. Select Off (deactivates color calibration), User Calibration, or Factory Calibration (the product

will use a default white setting).

3. For User Calibration mode, select the color value to edit (Red, Green, Blue, Amber, or Mint).

4. Set the maximum value for the selected color (125–255).

5. Repeat steps 3 and 4 until the product outputs as desired.

LED Frequency

This option changes the Pulse Width Modulation (PWM) frequency of the LEDs on the Ovation Rêve E-3.
To do so, follow the instructions below:

1. Go to the LED Frequency main level.

2. Select PWM Frequency (600Hz, 1200Hz, 2000Hz, 4000Hz, 6000Hz, or 25Khz).

Fan Mode

This setting determines how the fan speed on the Ovation Rêve E-3 is set.

1. Go to the Fan Mode main level

2. Select Auto (fan speed will increase or decrease based on product temperature), Off (fan will
stay off. Product output will decrease based on product temperature), Silent (fan will maintain a

constant silent speed), or On (fan speed will always be at maximum).

NOTICE: When operating in Fan Mode: Off, the output of the fixture will be reduced
and will not reach the same levels as when using other fan modes.

WARNING: When operating in Fan Mode: Off, the fixture will become hotter to the
touch than when using other fan modes. Use proper protective equipment to prevent
burns. Keep a safe distance from flammable objects.

Back Light

This setting allows for selection of the amount of time the backlight on the Ovation Rêve E-3’s display
stays on after the last button is pressed on the control panel.

1. Go to the Back Light main level.

2. Select 10S (10 seconds), 30S (30 seconds), 2Min (2 minutes), or Always On (remains on).

System Information

This option displays the total number of hours the product has run, the installed software version, and the
product’s UID.

1. Go to the Information main level.

2. Select Fixture Hours, LED Hours, Version , or UID.

18

Ovation Rêve E-3 User Manual Rev. 8

Operation

Virtual Color Wheel

The Ovation Rêve E-3 includes a feature called the Virtual Color Wheel (VCW). This feature is available as a
standalone control mode for manual use and as a control channel in select DMX personalities. More than 30
premixed colors, custom blended by Chauvet engineers, are available to call up for easier programming.
The DMX values used to mix these colors are provided below. The overall intensity of the Ovation fixture can
be adjusted to more closely replicate familiar industry-standard colors. A chart is available at

www.chauvetprofessional.com

for comparison purposes only and is not an assertion that Chauvet’s premixed colors match any of the gel
colors listed.

Virtual Color Wheel Chart

DMX Channel

Value

000  005 -- -- -- -- -- -­006  013 C3050 - Md Yellow 255 225 0 255 37
014  021 C3040 - Lt Yellow 255 177 3 255 37
022  028 C3240 - Amb Yellow 255 220 0 255 0
029  035 C2340 - VLt Amber 195 0 15 255 57
036  043 C2040 - Lt Amber 255 0 11 255 61
044  051 C2050 - Md Amber 255 53 0 255 17
052  059 C2060 - Dk Amber 255 8 0 255 17
060  067 C1050 - Lt Red 255 0 3 14 0
068  075 C1080 - Md Red 255 0 2 0 0
076  083 C1020 - NC Pink 255 75 62 255 73
084  091 C1030 - Md Pink 255 75 57 255 41
092  099 C1630 - Dk Pink 218 77 57 255 61
100  107 C1250 - Md Red Amber 255 0 9 168 0

108  115 C1060 - Dk Red Amber 255 5 9 36 0

116  121 C1650 - Magenta 255 3 62 255 12
122  130 C6170 - Dk Magenta 255 0 55 0 0
131  138 C6020 - Lt Lavender 255 220 93 255 44
139  146 C5030 - Lt Blue 0 255 159 112 78
147  154 C5020 - VLt Blue
155  162 C5430 - Lt Blue2 0 215 132 52 92
163  170 C5070 - Blue 0 195 188 0 19
171  178 C5050 - Md Blue 0 163 190 0 68
179  186 C5060 - Dk Blue 0 128 193 0 38
187  194 C5690 - Indigo 53 9 255 0 0
195  202 C5080 - VDk Blue 7841160 0
203  210 C5081 - VDk Blue2 11 82 139 0 0

211  218 C4370 - Yel Green 0 255 2 25 0
219  226 C4070 - Green 0 255 9 0 175
227  234 C4550 - Turquoise 0 255 87 96 255
235  242 C4560 - Aqua 0 255 98 44 255
243  250 C4570 - Blue Green 0 255 26 8 0
251  255 -- -- -- -- -- --

Note: The colors above are simulated renditions of the color output produced
compared with other similar incandescent products. Chauvet makes no guarantee of
the color output accuracy.

Display Readout

to compare Chauvet’s premixed colors with popular gel colors. This chart is

Red

Value

0 215 145 196 65

Green

Value

Blue

Value

Amber

Value

Mint

Value

Ovation Rêve E-3 User Manual Rev. 8

19

Operation

Color Temperature Chart

Color Temperature Red Value Green Value Blue Value Amber Value Mint Value

2800K 253 0 25 255 145
2900K 253 3 28 255 153
3000K 251 5 33 255 161
3100K 248 7 36 255 169
3200K 245 9 45 255 173
3300K 24213 47255182
3400K 23722 53255185
3500K 23030 58255185
3600K 22540 64255185
3700K 22148 70255185
3800K 22048 74255197
3900K 22050 79255203
4000K 21058 84255203
4100K 20563 88255203
4200K 19968 95255204
4300K 18969 98255204
4400K 183 71 103 255 204
4500K 174 78 107 255 204
4600K 170 80 112 255 204
4700K 166 89 119 255 204
4800K 164 98 123 255 203
4900K 163 100 129 255 205
5000K 163 103 137 255 206
5100K 163 108 142 255 208
5200K 163 116 147 255 208
5300K 163 118 156 255 210
5400K 162 122 162 255 216
5500K 162 124 166 255 224
5600K 162 127 172 255 229
5700K 159 127 177 255 231
6000K 158 134 192 241 231
6500K 152 152 206 225 231
7000K 144 157 224 218 231
7500K 127 172 238 218 231
8000K 122 175 255 200 231

Note: The color temperatures above are simulated renditions of the color output
produced compared with a tungsten lamp at the specified color temperature. Chauvet
makes no guarantee of the color output accuracy.

Color Temperature DMX Chart

DMX Channel

000  005 No function 084  090 3900–4000K 168  174 5100–5200K
006  013 2800–2900K 091  097 4000–4100K 175  181 5200–5300K
014  020 2900–3000K 098  104 4100–4200K 182  188 5300–5400K
021  027 3000–3100K 105  111 4200–4300K 189  195 5400–5500K
028  034 3100–3200K 112  118 4300–4400K 196  202 5500–5600K
035  041 3200–3300K 119  125 4400–4500K 203  209 5600–5700K
042  048 3300–3400K 126  132 4500–4600K 210  216 5700–6000K
049  055 3400–3500K 133  139 4600–4700K 217  223 6000–6500K
056  062
063  069 3600–3700K 147  153 4800–4900K 231  237 7000–7500K
070  076 3700–3800K 154  160 4900–5000K 238  244 7500–8000K
077  083 3800–3900K 161  167 5000–5100K 245  255 8000K

Color

Temperature

3500–3600K 140  146 4700–4800K 224  230 6500–7000K

DMX Channel

20

Color

Temperature

Ovation Rêve E-3 User Manual Rev. 8

DMX Channel

Color

Temperature

Operation

DMX Values

18Ch / 14Ch1 / 14Ch2 / 12Ch

12Ch 14Ch1 14Ch2 18Ch

1111Dimmer 000  255 0–100%
2–22Dimmer fine 000  255 0–100%
3233Red 000  255 0–100%

– 4 4 Red fine 000  255 0–100%

4355Green 000  255 0–100%

–66Green fine 000  255 0–100%

5477Blue 000  255 0–100%

– 8 8 Blue fine 000  255 0–100%

6599Amber 000  255 0–100%

– 10 10 Amber fine 000  255 0–100%

7 6 11 11 Mint 000  255 0–100%

–1212Mint fine 000  255 0–100%

871313Strobe

9 8 – 14 Virtual color wheel 000  255

10 9 – 15 Color temperature 000  255

1110–16Hue

– 11 – – Auto programs

–12– –Auto speed 000  255 Auto speed, slow to fast

–13–17

12 14 14 18 Gobo rotator

Function Value Percent/Setting

000  010 No function
011  255 Strobe, slow to fast

Refer to Virtual Color Wheel Chart

Refer to Color Temperature DMX Chart
000  000 0
001  255 -25–25
000  010 No function
011  060 Auto program 1
061  110 Auto program 2

111  160 Auto program 3
161  210 Auto program 4
211  255 Auto program 5

000  007 No function
008  015 Dimmer reset
016  023 Red shift on
024  031 Red shift off
032  039 S-curve dimmer
040  047 Linear dimmer
048  055 Square dimmer curve
056  063 Inverse square dimmer curve
064  071 Dimmer speed mode: OFF
072  079 Dimmer speed 1 (fastest)

Control

(hold for 3 seconds)

080  087 Dimmer speed 2
088  095 Dimmer speed 3 (slowest)
096  103 Fan auto

104  111 Fan on

112  119 Fan off
120  127 Fan silent
128  135 X-Fade Speed: OFF
136  143 X-Fade Speed: 1 (fastest)
144  151 X-Fade Speed: 2
152  159 X-Fade Speed: 3
160  167 X-Fade Speed: 4 (slowest)
168  255 Reserved for future use
000  127 Index
128  190 Clockwise rotation, fast to slow
191  192 Stop
193  255

Counterclockwise rotation, slow to fast

Ovation Rêve E-3 User Manual Rev. 8

21

8Ch / 6Ch / 5Ch / 1Ch

1Ch 5Ch 6Ch 8Ch Function Value Percent/Setting

11–1Dimmer 000  255 0–100%
––12Red 000  255 0–100%
––23Green 000  255 0–100%
––34Blue 000  255 0–100%
––45Amber 000  255 0–100%
––56Mint 000  255 0–100%

–––7Strobe

–2––Virtual color wheel000  255
–3––Color temperature000  255

–4––Hue

–568Gobo rotator

000  010 No function
011  255 Strobe, slow to fast

Refer to Virtual Color Wheel Chart

Refer to Color Temperature DMX Chart
000  000 0
001  255 -25–25
000  127 Index
128  190 Clockwise rotation, fast to slow
191  192 Stop
193  255 Counterclockwise rotation, slow to fast

HSV

Channel Function Value Percent/Setting

1Hue 000  255 0–100%
2 Saturation 000  255 0–100%
3Value 000  255 0–100%

000  127 Index

4 Gobo rotator

128  190 Clockwise rotation, fast to slow
191  192 Stop
193  255 Counterclockwise rotation, slow to fast

Operation

22

Ovation Rêve E-3 User Manual Rev. 8

Technical

5. Technical Information

Product Maintenance

To maintain optimum performance and minimize wear, clean this product frequently. Usage and
environment are contributing factors in determining the cleaning frequency.

Clean this product at least twice a month. Dust build-up reduces light output performance and can cause
overheating. This can lead to reduced light source life and increased mechanical wear.

To clean the product:

1. Unplug the product from power.

2. Wait until the product is at room temperature.

3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external
vents.

4. Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl
alcohol.

5. Apply the solution directly to a soft, lint-free cotton cloth or a lens-cleaning tissue.

6. Softly drag any dirt or grime to the outside of the transparent surface.

7. Gently polish the transparent surfaces until they are free of haze and lint.

Always dry the transparent surfaces carefully after cleaning them.

Ovation Rêve E-3 User Manual Rev. 8

23

Technical Specifications

UL 1573

CSA C22.2 No. 166

E113093

R

6. Technical Specifications

Dimensions and Weight

Length Width Height Weight

Fixture only
w/ 5° lens extended, yoke up
w/ 10° lens extended, yoke up
w/ 14° lens extended, yoke up
w/ 19°, 26°, 36°, or 50° lens

extended, yoke up
w/ 15°–30° lens, yoke up
w/ 25°–50° lens, yoke up

Power

Power Supply Type Range Voltage Selection

Switching (internal) 100 to 240 VAC, 50/60 Hz Auto-ranging

Parameter 100 V, 60 Hz 120 V, 60 Hz 208 V, 60 Hz 230 V, 50 Hz 240 V, 50 Hz

Consumption 371 W 367 W 356 W 353 W 356 W

Operating Current 3.68 A 3.04 A 1.76 A 1.59 A 1.52 A

Power-linking current

(products)

Power I/O U.S./Canada Worldwide

Power input connector Seetronic Powerkon IP65 Seetronic Powerkon IP65

Power output connector Seetronic Powerkon IP65 Seetronic Powerkon IP65

Power cord plug Edison (U.S.) Local plug

(3 products)

Light Source

Type Color Quantity Power Current Lifespan Color Temperature

Red

Green

LED

Blue

Royal blue

Amber

Mint

Photometrics

Parameter 5° 10° 14° 19° 26° 36° 50° 15°–30° 25°–50°

Beam angle 4.6° 10° 14.8° 18.5° 26° 33.3° 49.5° 13° 28.5° 23.6° 40.5°

Field angle 5.6° 11.1° 16° 21.6° 29.6° 37.1° 55.7° 15.4° 32.2° 25.8° 44.1°
Illuminance

@ 5 m (lux)

Lumens 5,076 11,250 12,179 12,156 13,300 13,223 12,216 12,057 14,355

31,856 18,924 9,284 5,635 3,378 2,085 870 9,292 2,671 3,710 1,527

Thermal

Maximum External Temperature Cooling System

113 °F (45 °C) Fan-assisted convection

DMX

I/O Connector Channel Range

3- and 5-pin XLR 1, 5, 6, 8, 12, 14CH1, 14CH2, 18, or HSV

Ordering

Product Name Item Name Item Code UPC Number

Ovation Rêve E-3 OVATIONREVEE3 03121729 78146220778

20.44 in (519 mm) 13.07 in (332 mm) 20.53 in (522 mm) 18.6 lb (8.4 kg)

41.60 in (1056 mm)

32.87 in (835 mm) 13.07 in (332 mm) 20.01 in (510 mm) 24 lb (10.8 kg)

29.70 in (755 mm) 13.07 in (332 mm) 20.53 in (522 mm) 25.6 lb (11.6 kg)

26.83 in (698 mm) 13.07 in (332 mm) 20.53 in (522 mm) 24.2 lb (10.9 kg)

33.02 in (839 mm) 13.52 in (343 mm) 20.53 in (522 mm) 32.3 lb (14.6 kg)

25.74 in (654 mm) 13.52 in (343 mm) 20.53 in (522 mm) 29.8 lb (13.5 kg)

13.6 A

12
19

3

9
24
24

13.6 A

(4 products)

14.17 in (360 mm) 21.42 in (544 mm) 26 lb (11.7 kg)

13.6 A

(7 products)

3.5–10 W 2.4 A 50,000 hours 5470 K

13.6 A

(8 products)

(8 products)

13.6 A

24

Ovation Rêve E-3 User Manual Rev. 8

Contact Us

Contact Us

General Information Technical Support

Chauvet World Headquarters

Address: 3360 Davie Rd., Suite 509 Voice: [phone]

Chauvet U.K.

Little Oak Drive, Sherwood Park

Chauvet Benelux

Chauvet France

Chauvet Germany

Address: Bruno-Bürgel-Str. 11 Email: [e-mail]

Chauvet Mexico

Address: Av. de las Partidas 34 - 3B Email: [e-mail]

Lerma, Edo. de México, CP 52000

Davie, FL 33314 Fax: [phone]

Voice: [phone] Email: [e-mail]

Fax: [phone]

Toll Free: [phone] Website: www.chauvetprofessional.com

Address: Pod 1 EVO Park Email: [e-mail]

Nottinghamshire, NG15 0EB Website: www.chauvetprofessional.eu

UK

Voice: [phone]

Fax: [phone]

Address: Stokstraat 18 Email: [e-mail]

9770 Kruishoutem

Belgium Website: www.chauvetprofessional.eu

Voice: [phone]

Address: 3, Rue Ampère Email: [e-mail]

91380 Chilly-Mazarin

France Website: www.chauvetprofessional.eu

Voice: [phone]

28759 Bremen

Germany Website: www.chauvetprofessional.eu

Voice: [phone]

(Entrance by Calle 2)

Zona Industrial Lerma Website: www.chauvetprofessional.mx

Voice: [phone]

Warranty & Returns

For warranty terms and conditions and return information, please visit our website.

For customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration
For customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg,

France, and Germany: www.chauvetlighting.eu/warranty-registration

.

Ovation Rêve E-3 User Manual Rev. 8

.

25