Page 1
User Manual
Page 2
TABLE OF CONTENTS
Table of Contents
1. Before You Begin .........................................................................................
What Is Included ...................................................................................................... 1
Unpacking Instructions............................................................................................. 1
Claims ............................................................................................................................ 1
Text Conventions ..................................................................................................... 1
Symbols ................................................................................................................... 1
Disclaimer ................................................................................................................ 1
Intellectual Property ................................................................................................. 1
Safety Notes............................................................................................................. 2
2. Introduction................................................................................................... 3
Product Overview..................................................................................................... 3
Product Dimensions................................................................................................. 3
3. Setup.............................................................................................................. 4
DC Power................................................................................................................. 4
ShowXpress Software.............................................................................................. 4
Plug and Play ................................................................................................................. 4
Minimum System Requirements .................................................................................... 4
Mounting .................................................................................................................. 4
4. Operation....................................................................................................... 5
LED Indicators.......................................................................................................... 5
Troubleshooting ............................................................................................................. 5
Standalone Playback ............................................................................................... 5
Timelines........................................................................................................................ 5
Zones ............................................................................................................................. 5
Buttons ........................................................................................................................... 5
Phoenix Connector......................................................................................................... 5
Triggers .......................................................................................................................... 6
IR Remote Control ................................................................................................... 6
IR Extension Cable ........................................................................................................ 6
Art-Net™ Universe Access ...................................................................................... 6
5. Technical Specifications.............................................................................. 7
Returns.............................................................................................................. 8
Contact Us......................................................................................................... 9
1
XPRESS-RACK 1024 User Manual Rev. 2
Page 3
Before You Begin
1. Before You Begin
What Is Included
• XPRESS-RACK 1024
• USB cable
Unpacking Instructions
Carefully unpack the product immediately and check the container to make sure all the parts are in the
package and are in good condition.
Claims
If the box or the contents (the product and included accessories) appear damaged from shipping, or show
signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier
immediately may invalidate your claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed
damage, file a claim with Chauvet within 7 days of delivery.
Text Conventions
Convention Meaning
1–512 A range of values
50/60 A set of values of which only one can be chosen
Settings A menu option not to be modified
<ENTER> A key to be pressed on the product’s control panel
ON A value to be entered or selected
• IR Extension Cable
• IR Remote
Symbols
Symbol Meaning
Critical installation, configuration, or operation information. Not following these
instructions may make the product not work, cause damage to the product, or cause
harm to the operator.
Important installation or configuration information. The product may not function
correctly if this information is not used.
Useful information.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects. However,
Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,
damage or disruption caused by any errors or omissions in this document, whether such errors or
omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the
content of this document without any obligation to notify any person or company of such revision, however,
Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest
version from www.chauvetdj.com
.
Intellectual Property
The works of authorship contained in this manual, including, but not limited to, all design, text and images
are owned by Chauvet.
© Copyright 2020 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.
CHAUVET, the Chauvet logo, and XPRESS-RACK 1024 are registered trademarks or trademarks of
Chauvet & Sons LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other
company and product names and logos referred to herein may be trademarks of their respective
companies.
XPRESS-RACK 1024 User Manual Rev. 2
Page 1 of 9
Page 4
Safety Notes
• This product is not intended for permanent installation.
• Always connect the product to a grounded circuit to avoid the risk of electrocution.
• Make sure the power (USB) cord is not crimped or damaged.
• Never disconnect the product from power by pulling or tugging on the cord.
• Make sure there are no flammable materials close to the product when operating.
• Do not touch the product’s housing when operating because it may be very hot.
• The voltage of the outlet to which you are connecting this product must be within the range
stated on the decal or rear panel of the product.
• The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose the
product to rain or moisture.
• Always install the product in a location with adequate ventilation, at least 20 in (50 cm) from
adjacent surfaces.
• Be sure that no ventilation slots on the product’s housing are blocked.
• Never connect the product to a dimmer or rheostat.
• Never carry the product from the power cord.
• The maximum ambient temperature is 104 °F (40 °C). Do not operate this product at higher
temperatures.
• In the event of a serious operating problem, stop using the product immediately.
• Do not open this product. It contains no user-serviceable parts.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.
Before You Begin
Keep this User Manual for future use. If the product is sold to someone else, be sure that they
also receive this document.
Page 2 of 9
XPRESS-RACK 1024 User Manual Rev. 2
Page 5
Introduction
USB In
Power
Indicator
Program
Indicator
(x16)
USB
Indicator
IR
Indicator
IR Extension
Input
DMX OutPhoenix
Connector
Program
Button
(x16)
1.75 in
44 mm
3 in
76 mm
19 in
483 mm
2. Introduction
Product Overview
Product Dimensions
XPRESS-RACK 1024 User Manual Rev. 2
Page 3 of 9
Page 6
Setup
3. Setup
DC Power
The XPRESS-RACK 1024 is a hot-swappable USB-to-DMX interface, designed to connect to and be
powered by the USB port of a computer using Windows
The required DC voltage is 5 V, which is standard across most computers.
ShowXpress Software
The XPRESS-RACK 1024 requires a computer with the ShowXpress software installed to function.
Download the ShowXpress software for free from www.chauvetdj.com.
Plug and Play
The XPRESS-RACK 1024 drivers are included in the installation of the ShowXpress software. Once the
software is installed, the product is hot-swappable, and will re-connect within seconds of being plugged in
to the computer.
In the unlikely case that the product is not recognized, the drivers can be downloaded from
www.chauvetdj.com
and manually installed.
Minimum System Requirements
• Windows® 10 - Core 2 duo (year 2005), 2 GB RAM
• Mac OS X - All Intel-based Mac computers with Leopard and more
Mounting
The XPRESS-RACK 1024 fits in a standard 19” rack, or it can be placed on a flat, stable surface.
®
10 (no other versions supported) or Mac OS X.
Page 4 of 9
XPRESS-RACK 1024 User Manual Rev. 2
Page 7
Operation
Switch
In
Ground
In
Secure with
screwdriver
Phoenix
Connector
Top Vie w
4. Operation
LED Indicators
When plugged in, the LED indicators display the status of the product.
The PWR indicator indicates that the product is receiving sufficient DC power.
The USB indicator indicates that the product is connected to, and receiving a signal from, the ShowXpress
software.
The IR indicator indicates that the product is receiving a signal from an IR Remote.
The Program indicators indicate that the program assigned to the adjacent button is running.
Troubleshooting
If the USB indicator is not flashing, try the following steps:
1. Close the ShowXpress software.
2. Disconnect the XPRESS-RACK 1024 from the computer.
3. Wait 10 seconds.
4. Re-connect the XPRESS-RACK 1024 to the computer.
5. Re-open the ShowXpress software.
If this does not work, try re-installing the device driver manually. The current device drivers are available on
www.chauvetdj.com
If re-installing the device driver does not work, call Chauvet Customer Service.
Standalone Playback
The XPRESS-RACK 1024 can store a DMX program to call back while not plugged into a computer. After
programming the show to be uploaded, do the following:
1. Navigate to the StandAlone tab.
2. Add the desired scene or scenes to one or more Timelines
3. Assign the program to one of the Zones
4. Assign the program to one of the 16 Buttons
5. Select from Auto Start, Enable calendar “on” trigger, and/or Enable calendar “off” trigger.
6. Click Upload data.
Timelines
The Timelines allow for the placement and timing of multiple scenes in a Zone. Only one set of Timelines
can be activated in each Zone at one time.
Zones
4 zones are available for independent programming. Activating a program in one zone does not affect the
programs running in the other zones, but does replace any program previously running in that zone.
Zones may overlap with each other, but if affecting the same value as a program in another zone, the most
recently activated value will take precedence.
Buttons
The XPRESS-RACK 1024 has 16 programmable buttons, which can each trigger scenes as assigned via
the ShowXpress StandAlone tab. Pressing a button will override a previously running program if they are
both in the same Zone.
Phoenix Connector
The Phoenix connector on the back of the product can be wired to trigger any programs assigned to
buttons 1–8. Connect one end of a switch to one of the COM (ground) contacts, and the other end to the
contacts for the program(s) to be triggered. Secure each wire to the Phoenix connector by turning the
captive screws until tight.
.
.
using the drop-down menu.
.
XPRESS-RACK 1024 User Manual Rev. 2
Page 5 of 9
Page 8
Operation
Triggers
Aside from the Buttons and Phoenix Contacts, a standalone program uploaded to the XPRESSRACK 1024 can be activated/deactivated in the following ways:
• Auto Start: the program will immediately begin when the product is connected to power.
• Enable calendar “on” trigger: the program will begin at the scheduled time, as long as the product
is plugged into power. Click Edit to set the date and time to begin the program.
• Enable calendar “off” trigger: the program will stop at the scheduled time, as long as the product
is plugged into power. Click Edit to set the date and time to stop the program.
All three options may be selected at once, or none (only the buttons or the phoenix contacts will trigger the
programs).
IR Remote Control
The included IR Remote can trigger any program assigned to one of the 16 buttons and can control the
speed of the DMX programs. See IR Extension Cable for information on how to enable IR Remote control.
Buttons:
<1>–<16> - Triggers the program assigned to that numbered button via the
ShowXpress software StandAlone tab.
<17>–<18> - No function.
<–> - Slows down all running programs.
<+> - Speeds up all running programs.
<=> - Sets all running programs to their default speed.
IR Extension Cable
To enable IR Remote control:
1. Plug the included IR Extension Cable in (See the Product Overview
Extension Input on the back panel of the product.).
2. Set the sensor on the end of the cable within line of sight of the operator (maximum unobstructed
range: 15.1 ft / 4.6 m).
3. Aim the IR remote at the sensor, and press the buttons as shown above.
for the location of the IR
Art-Net™ Universe Access
The use of this product unlocks an additional Art-Net™ universe through the ShowXpress software while it
is plugged in. If used, this universe counts towards the total maximum number of universes allowed by the
software (6 universes).
The use of Art-Net™ may require additional hardware.
Art-Net™ Designed by and Copyright Artistic Licence Holdings Ltd.
Page 6 of 9
XPRESS-RACK 1024 User Manual Rev. 2
Page 9
Technical Specifications
5. Technical Specifications
Dimensions and Weight
Length Width Height Weight
19 in (483 mm) 3 in (76 mm) 1.75 in (44 mm) 2.8 lb (1.3 kg)
Note: Dimensions in inches are rounded.
Power
Power Supply Type Input Voltage
USB (external) 5 V DC (USB)
Thermal
Maximum External Temperature Cooling System
104 °F (40 °C) Convection
DMX
Output Connector Channel Range Refresh Rate
3-pin XLR x2 1024 + 512 via Art-Net™ 40 Hz
Ordering
Product Name Item Code UPC Number
XPRESS-RACK 1024 11081625 781462219734
XPRESS-RACK 1024 User Manual Rev. 2
Page 7 of 9
Page 10
Returns
Returns
In case you need to get support or return a product:
• If you are located in the U.S., contact Chauvet World Headquarters.
• If you are located in the UK or Ireland, contact Chauvet Europe Ltd.
• If you are located in Benelux, contact Chauvet Europe BVBA.
• If you are located in France, contact Chauvet France.
• If you are located in Germany, contact Chauvet Germany.
• If you are located in Mexico, contact Chauvet Mexico.
• If you are located in any other country, DO NOT contact Chauvet. Instead, contact your local
distributor. See www.chauvetdj.com
France, Germany, or Mexico.
If you are located outside the U.S., U.K., Ireland, Benelux, France, Germany, or Mexico,
contact your distributor of record and follow their instructions on how to return Chauvet
products to them. Visit our website www.chauvetdj.com
Call the corresponding Chauvet Technical Support office and request a Return Merchandise Authorization
(RMA) number before shipping the product. Be prepared to provide the model number, serial number, and
a brief description of the cause for the return.
To submit a service request online, go to www.chauvetdj.com/service-request
Send the merchandise prepaid, in its original box, and with its original packing and accessories. Chauvet
will not issue call tags.
Clearly label the package with the RMA number. Chauvet will refuse any product returned without an RMA
number.
Write the RMA number on a properly affixed label. DO NOT write the RMA number directly
on the box.
for distributors outside the U.S., U.K., Ireland, Benelux,
for contact details.
.
Before sending the product, clearly write the following information on a piece of paper and place it inside
the box:
• Your name
• Your address
• Your phone number
• RMA number
• A brief description of the problem
Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be
your responsibility. FedEx packing or double-boxing are recommended.
Chauvet reserves the right to use its own discretion to repair or replace returned
product(s).
Page 8 of 9
XPRESS-RACK 1024 User Manual Rev. 2
Page 11
Contact Us
Contact Us
Chauvet World Headquarters
Chauvet Europe Ltd
Chauvet Europe BVBA
Chauvet France
Chauvet Germany
Chauvet Mexico
Address: Av. de las Partidas 34 - 3B
Lerma, Edo. de México, CP 52000
General Information Technical Support
Address: 5200 NW 108th Ave. Voice: (844) 393-7575
Sunrise, FL 33351 Fax: (954) 756-8015
Voice: (954) 577-4455 Email: chauvetcs@chauvetlighting.com
Fax: (954) 929-5560
Toll Free: (800) 762-1084 Website: www.chauvetdj.com
Address: Unit 1C Email: UKtech@chauvetlighting.eu
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK Website: www.chauvetdj.eu
NG16 6NT
Voice: +44 ( 0 ) 1 7 7 3 5 1111 5
Fax : + 4 4 ( 0 ) 1 773 511110
Address: Stokstraat 18 Email: BNLtech@chauvetlighting.eu
9770 Kruishoutem
Belgium Website: www.chauvetdj.eu
Voice: +32 9 388 93 97
Address: 3, Rue Ampère
91380 Chilly-Mazarin
France Website: www.chauvetdj.eu
Voice: +33 1 78 85 33 59
Address: Bruno-Bürgel-Str. 11
28759 Bremen
Germany Website: www.chauvetdj.eu
Voice: +49 421 62 60 20
(Entrance by Calle 2)
Zona Industrial Lerma Website: www.chauvetdj.mx
Voice: +52 (728) 690-2010
Email: FRtech@chauvetlighting.fr
Email: DEtech@chauvetlighting.de
Email: servicio@chauvet.com.mx
Outside the U.S., U.K., Ireland, Benelux, France, Germany, or Mexico, contact the dealer of record.
Follow the instructions to request support or to return a product. Visit our website for contact details.
XPRESS-RACK 1024 User Manual Rev. 2
Page 9 of 9
Loading...