Carefully unpack the product immediately and check the container to make sure all the parts are in the
package and are in good condition.
Claims
If the box or the contents (the product and included accessories) appear damaged from shipping, or show
signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier
immediately may invalidate your claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed
damage, file a claim with Chauvet within 7 days of delivery.
Text Conventions
ConventionMeaning
1–512A range of values
50/60A set of values of which only one can be chosen
SettingsA menu option not to be modified
<ENTER>A key to be pressed on the product’s control panel
ONA value to be entered or selected
Symbols
SymbolMeaning
Critical installation, configuration, or operation information. Not following these
instructions may make the product not work, cause damage to the product, or cause
harm to the operator.
Important installation or configuration information. The product may not function
correctly if this information is not used.
Useful information.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects. However,
Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,
damage or disruption caused by any errors or omissions in this document, whether such errors or
omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the
content of this document without any obligation to notify any person or company of such revision, however,
Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest
version from www.chauvetdj.com
.
Intellectual Property
The works of authorship contained in this manual, including, but not limited to, all design, text and images
are owned by Chauvet.
Electronically published by Chauvet in the United States of America.
CHAUVET, the Chauvet logo, and XPRESS-512S / XPRESS-1024 are registered trademarks or
trademarks of Chauvet & Sons LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other
countries. Other company and product names and logos referred to herein may be trademarks of their
respective companies.
XPRESS-512S / XPRESS-1024 User Manual Rev. 2
Page 1 of 8
Page 4
Safety Notes
•This product is not intended for permanent installation.
•Always connect the product to a grounded circuit to avoid the risk of electrocution.
•Make sure the power (USB) cord is not crimped or damaged.
•Never disconnect the product from power by pulling or tugging on the cord.
•Make sure there are no flammable materials close to the product when operating.
•Do not touch the product’s housing when operating because it may be very hot.
•The voltage of the outlet to which you are connecting this product must be within the range
stated on the decal or rear panel of the product.
•The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose the
product to rain or moisture.
•Always install the product in a location with adequate ventilation, at least 20 in (50 cm) from
adjacent surfaces.
•Be sure that no ventilation slots on the product’s housing are blocked.
•Never connect the product to a dimmer or rheostat.
•Never carry the product from the power cord.
•The maximum ambient temperature is 104 °F (40 °C). Do not operate this product at higher
temperatures.
•In the event of a serious operating problem, stop using the product immediately.
•Do not open this product. It contains no user-serviceable parts.
•To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.
Before You Begin
Keep this User Manual for future use. If the product is sold to someone else, be sure that they
also receive this document.
Page 2 of 8
XPRESS-512S / XPRESS-1024 User Manual Rev. 2
Page 5
Introduction
USB In
Power
Indicator
USB
Indicator
USB
Indicator
Power
Indicator
USB In
DMX OutDMX Out
XPRESS-1024XPRESS-512S
1.8 in
45 mm
4.3 in
110 mm
2.6 in
66 mm
1.4 in
35 mm
1.4 in
35 mm
2.9 in
74 mm
2. Introduction
Product Overview
Product Dimensions
XPRESS-512S / XPRESS-1024 User Manual Rev. 2
Page 3 of 8
Page 6
Setup
Mounting Holes (x4)
3. Setup
DC Power
The XPRESS-512S / XPRESS-1024 is a hot-swappable USB-to-DMX interface, designed to connect to
and be powered by the USB port of a computer using Windows
Mac OS X. The required DC voltage is 5 V, which is standard across most computers.
ShowXpress Software
The XPRESS-512S / XPRESS-1024 requires a computer with the ShowXpress software installed to
function until a Standalone program is uploaded. Download the ShowXpress software for free from
www.chauvetdj.com
.
Plug and Play
The XPRESS-512S / XPRESS-1024 drivers are included in the installation of the ShowXpress software.
Once the software is installed, both products are hot-swappable, and will re-connect within seconds of
being plugged in to the computer.
In the unlikely case that the product is not recognized, the drivers can be downloaded from
www.chauvetdj.com
and manually installed.
Minimum System Requirements
•Windows® 10 - Core 2 duo (year 2005), 2 GB RAM
•Mac OS X - All Intel-based Mac computers with Leopard and more
Mounting
The XPRESS-512S should be placed on a flat, stable surface.
The XPRESS-1024 can either be placed on a flat, stable surface, or secured with zip-ties, screws, or
anything else which fits through the mounting holes.
Before deciding on a location for either product, read the Safety Notes
®
10 (no other versions supported) or
.
Page 4 of 8
XPRESS-512S / XPRESS-1024 User Manual Rev. 2
Page 7
Operation
4. Operation
LED Indicators
When plugged in, the two LED indicators display the status of the product.
The PWR indicator indicates that the product is receiving sufficient DC power.
The USB indicator indicates that the product is connected to, and receiving a signal from, the ShowXpress
software.
Troubleshooting
If the USB indicator is not flashing, try the following steps:
1.Close the ShowXpress software.
2.Disconnect the XPRESS-512S / XPRESS-1024 from the computer.
3.Wait 10 seconds.
4. Re-connect the XPRESS-512S / XPRESS-1024 to the computer.
5. Re-open the ShowXpress software.
If this does not work, try re-installing the device driver manually. The current device drivers are available on
www.chauvetdj.com
If re-installing the device driver does not work, call Chauvet Customer Service.
Standalone Playback
The XPRESS-512S / XPRESS-1024 can store a DMX program to call back while not plugged into a
computer. After programming the show to be uploaded, do the following:
1. Navigate to the StandAlone tab.
2. Add the desired scene or scenes to one or more Timelines
3. Assign the program to one of the Zones
4.Click Upload data.
.
.
using the drop-down menu.
The uploaded program will immediately begin when the product is connected to power.
Timelines
The Timelines allow for the placement and timing of multiple scenes in a Zone. Only one set of Timelines
can be activated in each Zone at one time.
Zones
4 zones are available for independent programming. Activating a program in one zone does not affect the
programs running in the other zones, but does replace any program previously running in that zone.
Zones may overlap with each other, but if affecting the same value as a program in another zone, the most
recently activated value will take precedence.
Art-Net™ Universe Access
The use of either product each unlocks an additional Art-Net™ universe through the ShowXpress software
while it is plugged in. If used, these universes count towards the total maximum number of universes
allowed by the software (6 universes).
The use of Art-Net™ may require additional hardware.
Art-Net™ Designed by and Copyright Artistic Licence Holdings Ltd.
XPRESS-512S / XPRESS-1024 User Manual Rev. 2
Page 5 of 8
Page 8
Technical Specifications
5. Technical Specifications
Dimensions and Weight
ProductLengthWidthHeightWeight
XPRESS-512S2.9 in (74 mm)1.4 in (35 mm)1.4 in (35 mm)0.2 lb (0.1 kg)
XPRESS-10244.3 in (110 mm)2.6 in (66 mm)1.8 in (45 mm)0.4 lb (0.2 kg)
Note: Dimensions in inches are rounded.
Power
Power Supply TypeInput Voltage
USB (external)5 V DC (USB)
Thermal
Maximum External TemperatureCooling System
104 °F (40 °C)Convection
DMX
ProductOutput ConnectorChannel RangeRefresh Rate
XPRESS-512S3-pin XLR512 + 512 via Art-Net™40 Hz
XPRESS-10243-pin XLR x21024 + 512 via Art-Net™40 Hz
Ordering
Product NameItem CodeUPC Number
XPRESS-512S11081585781462219338
XPRESS-102411081584781462219321
Page 6 of 8
XPRESS-512S / XPRESS-1024 User Manual Rev. 2
Page 9
Returns
Returns
In case you need to get support or return a product:
•If you are located in the U.S., contact Chauvet World Headquarters.
•If you are located in the UK or Ireland, contact Chauvet Europe Ltd.
•If you are located in Benelux, contact Chauvet Europe BVBA.
•If you are located in France, contact Chauvet France.
•If you are located in Germany, contact Chauvet Germany.
•If you are located in Mexico, contact Chauvet Mexico.
•If you are located in any other country, DO NOT contact Chauvet. Instead, contact your local
distributor. See www.chauvetdj.com
France, Germany, or Mexico.
If you are located outside the U.S., U.K., Ireland, Benelux, France, Germany, or Mexico,
contact your distributor of record and follow their instructions on how to return Chauvet
products to them. Visit our website www.chauvetdj.com
Call the corresponding Chauvet Technical Support office and request a Return Merchandise Authorization
(RMA) number before shipping the product. Be prepared to provide the model number, serial number, and
a brief description of the cause for the return.
To submit a service request online, go to www.chauvetdj.com/service-request
Send the merchandise prepaid, in its original box, and with its original packing and accessories. Chauvet
will not issue call tags.
Clearly label the package with the RMA number. Chauvet will refuse any product returned without an RMA
number.
Write the RMA number on a properly affixed label. DO NOT write the RMA number directly
on the box.
for distributors outside the U.S., U.K., Ireland, Benelux,
for contact details.
.
Before sending the product, clearly write the following information on a piece of paper and place it inside
the box:
•Your name
•Your address
•Your phone number
•RMA number
•A brief description of the problem
Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be
your responsibility. FedEx packing or double-boxing are recommended.
Chauvet reserves the right to use its own discretion to repair or replace returned
product(s).
Outside the U.S., U.K., Ireland, Benelux, France, Germany, or Mexico, contact the dealer of record.
Follow the instructions to request support or to return a product. Visit our website for contact details.
Page 8 of 8
XPRESS-512S / XPRESS-1024 User Manual Rev. 2
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.