How it Works
CHAUVET DJ
Loading...
I
J
K
L
M
Loading...
Loading...
Intimidator Spot LED 350 X2
User Manual
21 pgs1.12 Mb0
Table of contents
Loading...

CHAUVET DJ Intimidator Spot LED 350 X2 User Manual

Download
User Manual
TABLE OF CONTENTS
1. Before You Begin .............................................................................. 3
Claims ........................................................................................................................ 3
2. Introduction ....................................................................................... 5
3. Setup .................................................................................................. 7
Fuse Replacement ..................................................................................................... 7
Power Linking............................................................................................................. 8
Orientation ................................................................................................................. 9
Rigging ....................................................................................................................... 9
4. Operation ..........................................................................................10
Starting Address ....................................................................................................... 11
DMX Personalities .................................................................................................... 11
14-CH ....................................................................................................................... 12
8-CH ......................................................................................................................... 14
Sound-Active Mode .................................................................................................. 15
Automatic Mode ....................................................................................................... 15
Manual Pan/Tilt Operation ....................................................................................... 15
Pan/Tilt Angle Range ............................................................................................... 15
Display ..................................................................................................................... 15
Master/Slave Mode .................................................................................................. 16
5. Technical Information ......................................................................18
6. Technical Specifications ..................................................................19
Page 2 of 21 Intimidator™ Spot LED 350 User Manual Rev. 8
What Is

Unpacking
Instructions

included accessories) appear damaged from
damage not related to shipping,
Text
1–512
A range of values
50/60
A set of values of which only one can be chosen
Settings
A menu option not to be modified
Menu > Settings
A sequence of menu options to be followed
<ENTER>
A key to be pressed on the product’s control panel
ON
A value to be entered or selected

Symbols

Critical installation, configuration, or operation information. Not damage to the product, or cause harm to the operator.
Document
The information and specifications contained in this document are subject to change
assumes no responsibility or liability for any errors or omissions
reserves the right to update the existing

1. BEFORE YOU BEGIN

Included

Claims

Conventions
• Intimidator™ Spot LED 350
• Hanging Bracket with Mounting
Hardware
Carefully unpack the product immediat ely and check the container to make sure all the parts are in the package and are in good condition.
If the box or the contents (the product and shipping, or show signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier immediately may invalidate your claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, or concealed damage, file a claim with Chauvet within 7 days of delivery.
Convention Meaning
Symbol Meaning
• Power Cord
• Warranty Card
• Quick Reference Guide
Information
following these instructions may make the product not work, cause
Important installation or configuration information. The product may not function correctly if this information is not used.
Useful information.
without notice. Chauvet that may appear in this manual. Chauvet document or to create a new document to correct any errors or omissions.
You can download the latest version of this document from www.chauvetlighting.com.
© Copyright 2015 Chauvet. All rights reserved.
Electronically published by Chauvet in the United States of America
Author Date Editor Date
R. Isenstadt 02/23/15 A. Leon 02/25/15
Intimidator™ Spot LED 350 User Manual Rev. 8 Page 3 of 21
Product at a
x
P
x
P
P
P
P
x
P

Safety Notes

information about the mounting, usage, and maintenance
Do not touch the product’s housing when operating because it may be very hot.
disconnect from power via breaker or by unplugging it.
Glance
Use on Dimmer Outdoor Use Sound-Activated DMX Master/Slave
These notes include important of this product; read before using the product.
• This product is not intended for permanent installation.
• Always connect the product to a grounded circuit to avoid the risk of electrocution.
• Always disconnect the product from power before cleaning or replacing the fuse.
• Avoid direct eye exposure to the light source while the product is on.
• Make sure the power cord is not crimped or damaged.
• Never disconnect the product from power by pulling or tugging on the cord.
• If mounting the product overhead, always secure to a fastening device using a
safety cable.
• Make sure there are no flammable materials close to the product when operating.
•
• Always make sure that the voltage of the outlet to which y ou are conne cti ng the
product is within the range stated on the decal or rear panel of the product.
• The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose the product to rain or moisture.
• Always install the product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
• Be sure that no ventilation slots on the product’s housing are blocked.
• Never connect the product to a dimmer.
• Make sure to replace the fuse with another of the same type and rating.
• Never carry the product from the power cord or any moving part. Always use the
hanging/mounting bracket or the handles.
• The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate the product at higher temperatures.
• In the event of a serious operating problem, stop using the product immediately.
• Never try to repair the product. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assistance center.
• To eliminate wear and improve its lifespan, during periods of non-use completely
Auto Programs Auto-ranging Power Supply Replaceable Fuse User-Serviceable
Keep this User Manual for future use. If you sell the product to another user, be sure to give this document to the next owner.
Page 4 of 21 Intimidator™ Spot LED 350 User Manual Rev. 8

2. INTRODUCTION

Product Overview

Control Panel and Button Menu
DMX Out
Safety Loop
Fuse Holder
DMX In
Power In
Power Out
Intimidator™ Spot LED 350 User Manual Rev. 8 Page 5 of 21

Product Dimensions

Page 6 of 21 Intimidator™ Spot LED 350 User Manual Rev. 8

AC Power

ranging power supply and it can work with
circuit breaker, power outlet, and
(circuit breaker or fuse).
an appropriate electrical ground to avoid the risk of
a rheostat (variable resistor) or dimmer circuit, even
Fuse

3. SETUP

The Intimidator™ Spot LED 350 has an auto­an input voltage range of 100–240 VAC, 50/60 Hz.
To determine the product’s power requirements ( wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart. The listed current rating indicates the product’s average current draw under normal conditions.
• Always connect the product to a protected circuit
Make sure the product has electrocution or fire.
• To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
Never connect the product to if the rheostat or dimmer channel serves only as a 0 to 100% switch.
1. Disconnect the product from power.
Replacement
2. Using a Phillips #2-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove the blown fuse.
4. Replace with a fuse of the same type and rating.
5. Screw the fuse holder cap back in place and reconnect power.
• Disconnect the product from power before replacing the fuse.
• Always replace a blown fuse with another of the same type and rating.
Intimidator™ Spot LED 350 User Manual Rev. 8 Page 7 of 21

Power Linking

Power Linking
You can power link up to 3 Intimidator™ Spot LED 350 units on 120 VAC or up to 7
The power linking diagram shown above corresponds to the North American
in other markets, you must
distributor as power linking connectors and
1st Product
2nd Product
3rd Product
Other products
The product provides power linking via the IEC outlet located in the back of the unit.
Diagram
Intimidator™ Spot LED 350 units on 230 VAC.
version of the product ONLY! If using the product consult with the local Chauvet requirements may differ in your country or region.
Page 8 of 21 Intimidator™ Spot LED 350 User Manual Rev. 8

Mounting

, read and follow the safety recommendations indicated in
may be mounted in any position; however, make sure
for weight
Mount the
always consider the length of the
on the
When using only one mounting clamp with this fixture, you must use a clamp with a
Rubber Feet (x4)
Safety Loop
Attachment Point
Bracket
Attachment (x2)
Before mounting the product the Safety Notes.

Orientation

The Intimidator™ Spot LED 350 adequate ventilation is provided around the product.

Rigging

• Before deciding on a location for the product, always make sure there is easy access to the product for maintenance and programming purposes.
• Make sure that the structure or surface onto which you are mounting the product can support the product’s weight. See the Technical Specifications information.
• When mounting the product overhead, always use a safety cable. product securely to a rigging point, whether an elevated platform or a truss.
• When rigging the product onto a truss, you should use a mounting clamp of appropriate weight capacity.
• When po wer linking m ultiple products, you must power linking cable and mount the products close enough for the cable to reach.
• The rubber feet also serve as floor supports. When mounting the product floor, make sure that the product and cables are away from people and vehicles.
Mounting Diagram
captive bolt to prevent accidental loosening.
Intimidator™ Spot LED 350 User Manual Rev. 8 Page 9 of 21

Control Panel
Operation

To access the control panel functions, use the four buttons located underneath the
<ENTER>

Menu Map

DMX Mode
001~512
Normal Tilt
tiL
Display
Pan 540
PA54
Tilt 270
Ti27

4. OPERATION

display.
Button Function
<MODE/ESC>
<UP>
<DOWN>
Mode Programming Steps Description
Operation
Modes
Pan
Tilt
Display
Channel Mode
Press to find an operation mode or to back out of the current menu option
Press to scroll up the list of options or to find a higher value Press to scroll down the list of options or to find a lower value Press to activate a menu option or a selected value
SLAv (Son)
NASL (SLoU)
NAFA (FASt)
NStS (SrUn) Normal Pan PAn Inverse Pan r PAn
Inverse Tilt r tiL
Normal
Inverse
Display
14-Channel
Mode
8-Channel
Mode
diS
r diS
14CH
8CH
Sets the DMX starting address Slave operating mode Automatic mode, Slow program Automatic mode, Fast program Sound-Active mode Normal Pan operation Inverse Pan operation Normal Tilt operation Inverse Tilt operation
Change the LCD display text position
Selects the DMX personality
Manual Pan
Range
Manual Tilt
Range
Reset rESt
Load LoAd
Page 10 of 21 Intimidator™ Spot LED 350 User Manual Rev. 8
Pan 360 PA36 Pan 180 PA18
Tilt 180 Ti18
Tilt 90 Ti 9
Select Pan angle range
Select Tilt angle range
Resets fixture Load factory defaults
Configuration
When selecting a starting DMX address, always consider the number of DMX channels
choose a starting address that is too high, you could
download the DMX Primer from
DMX
personality and
Set the product in DMX mode to control with a DMX controller.
(DMX)
1. Connect the product to a suitable power outlet.
2. Turn the product on.
3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input socket on the product.

Starting Address

the selected DMX mode uses. If you restrict the access to some of the product’s channels.
The Intimidator™ Spot LED 350 uses up to 14 DMX channels in its 14-channel DMX mode, which defines the highest configurable address to 499.
If you are not familiar with the DMX protocol,
www.chauvetlighting.com.
To select the starting address, do the following:
1. Press <MODE/ESC> repeatedly until 001 shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the starting address.
4. Press <ENTER>.
The Intimidator™ Spot LED 350 has two DMX personalities, an 8-channel
Personalities
a 14-channel personality. To choose which DMX personality to use, follow the steps below:
1. Press <MODE/ESC> repeatedly until either 14CH (to choose the 14-channel personality) or 8CH (to choose the 8-channel personality) shows on the display.
2. Press <ENTER>.
Intimidator™ Spot LED 350 User Manual Rev. 8 Page 11 of 21

DMX Channel Assignments and V alues

1
Pan
000 ó 255
0–540°
2
Fine Pan
000 ó 255
Fine control of panning
3
Tilt
000 ó 255
0–270°
4
Fine Tilt
000 ó 255
Fine control of tilting
5
Speed
000 ó 255
Pan/Tilt speed (fast to slow)
000 ó 006
White
007 ó 013
Yellow
014 ó 020
Pink
021 ó 027
Green
028 ó 034
Red
035 ó 041
Light Blue
042 ó 048
Kelly Green
049 ó 055
Orange
056 ó 063
Dark Blue
064 ó 070
White + Yellow
071 ó 077
Yellow + Pink
078 ó 084
Pink + Green
085 ó 091
Green + Red
092 ó 098
Red + Light Blue
099 ó 105
Light Blue + Kelly Green
106 ó 112
Kelly Green + Orange
113 ó 119
Orange + Dark Blue
120 ó 127
Dark Blue + White
128 ó 191
Color cycling rainbow with increasing speed
Reverse color cycling rainbow with increasing speed
064 ó 071
Gobo 7 shake, from slow to fast
072 ó 079
Gobo 6 shake, from slow to fast
080 ó 087
Gobo 5 shake, from slow to fast
088 ó 095
Gobo 4 shake, from slow to fast
096 ó 103
Gobo 3 shake, from slow to fast
104 ó 111
Gobo 2 shake, from slow to fast
112 ó 119
Gobo 1 shake, from slow to fast
120 ó 127
Open
128 ó 191
Cycle effect with increasing speed
192 ó 255
Reverse cycle effect with increasing speed

14-CH

Channel Function Value Setting
6 Color Wheel
192 ó 255
7 Gobo Wheel
Page 12 of 21 Intimidator™ Spot LED 350 User Manual Rev. 8
14-CH (cont.)
000 ó 063
Indexing
064 ó 147
Rotation effect with increasing speed
148 ó 231
Reverse rotation effect with increasing speed
232 ó 255
Gobo bounce
000 ó 007
Open
008 ó 012
Prism on
013 ó 130
Prism rotation with increasing speed
131 ó 247
Reverse prism rotation with increasing speed
248 ó 255
Prism effec t
10
Focus
000 ó 255
Motor focus, zoom out to zoom in
11
Dimmer
000 ó 255
0–100%
000 ó 003
Closed
004 ó 007
Open
008 ó 076
Strobe effect with increasing speed
077 ó 145
Pulse strobe
146 ó 215
Random shutter
216 ó 255
Open
000 ó 007
No function
008 ó 015
Blackout while pan/tilt moving
016 ó 023
Blackout while moving color wheel
024 ó 031
Blackout while moving gobo wheel
032 ó 039
Disable blackout while pan/tilt/moving color wheel
040 ó 047
Disable blackout while pan/tilt/moving gobo wheel
048 ó 055
Disable blackout while moving all options
056 ó 095
No function
096 ó 103
Reset pan
104 ó 111
Reset tilt
112 ó 119
Reset color wheel
120 ó 127
Reset gobo wheel
128 ó 135
Reset gobo rotation
136 ó 143
Reset prism
144 ó 151
Reset focus
152 ó 159
Reset all channels
160 ó 255
No function
000 ó 007
No function
008 ó 023
Automatic movem ent 1
024 ó 039
Automatic movement 2
040 ó 055
Automatic movement 3
056 ó 071
Automatic movement 4
072 ó 087
Automatic movement 5
088 ó 103
Automatic movement 6
104 ó 119
Automatic movement 7
120 ó 135
Automatic movement 8
136 ó 151
Sound-active movement 1
152 ó 167
Sound-active movement 2
168 ó 183
Sound-active movement 3
184 ó 199
Sound-active movement 4
200 ó 215
Sound-active movement 5
216 ó 231
Sound-active movement 6
232 ó 247
Sound-active movement 7
248 ó 255
Sound-active movement 8
DMX Channel Assignments and V alues ( c ont .)
Channel Function Value Setting
8 Gobo Rotation
9 Prism
12 Shutter
13 Control Functions
Intimidator™ Spot LED 350 User Manual Rev. 8 Page 13 of 21
14 Movement Macros
1
Pan
000 ó 255
0–540°
2
Tilt
000 ó 255
0–270°
000 ó 006
White
007 ó 013
Yellow
014 ó 020
Pink
021 ó 027
Green
028 ó 034
Red
035 ó 041
Light Blue
042 ó 048
Kelly Green
049 ó 055
Orange
056 ó 063
Dark Blue
064 ó 070
White + Yellow
071 ó 077
Yellow + Pink
078 ó 084
Pink + Green
085 ó 091
Green + Red
092 ó 098
Red + Light Blue
099 ó 105
Light Blue + Kelly Green
106 ó 112
Kelly Green + Orange
113 ó 119
Orange + Dark Blue
120 ó 127
Dark Blue + White
128 ó 191
Color cycling rainbow with increasing speed
192 ó 255
Reverse color cycling with increasing speed
064 ó 071
Gobo 7 shake, from slow to fast
072 ó 079
Gobo 6 shake, from slow to fast
080 ó 087
Gobo 5 shake, from slow to fast
088 ó 095
Gobo 4 shake, from slow to fast
096 ó 103
Gobo 3 shake, from slow to fast
104 ó 111
Gobo 2 shake, from slow to fast
112 ó 119
Gobo 1 shake, from slow to fast
120 ó 127
Open
128 ó 191
Cycle effect with increasing speed
192 ó 255
Reverse cycle effect with increasing speed
000 ó 063
Indexing
064 ó 147
Rotation effect with increasing speed
148 ó 231
Reverse rotation effect with increasing speed
232 ó 255
Gobo bounce
000 ó 007
Open
008 ó 012
Prism on
013 ó 130
Prism rotation with increasing speed
131 ó 247
Reverse prism rotation with increasing speed
248 ó 255
Prism effec t
7
Focus
000 ó 255
Motor focus, zoom out to zoom in
000 ó 003
Closed
004 ó 007
Open
008 ó 076
Strobe effect with increasing speed
077 ó 145
Pulse strobe
146 ó 215
Random shutter
216 ó 255
Open

8-CH

Channel Function Value Setting
3 Color Wheel
4 Gobo Wheel
5 Gobo Rotation
6 Prism
8 Shutter
Page 14 of 21 Intimidator™ Spot LED 350 User Manual Rev. 8
Configuration
to a DMX string connected to a DMX controller.
s in standalone mode may transmit DMX signals that could interfere with
Manual Pan/Tilt
Spot LED 350 to operate with normal tilting
Pan/Tilt Angle
Spot
(Standalone)
Set the product in one of the standalone modes to contr ol without a DMX controller.
1. Connect the product to power.
2. Turn the product on.
Never connect a product that is operating in any standalone mode (either Automatic or Sound-Active) Product the DMX signals from the controller.
Sound-Active

Automatic Mode

Operation

Display

Mode
Range
To enable the Sound-Active mode, do the following.
1. Press <MODE/ESC> repeatedly until one of the following shows on the display: NASl, NAFA, NStS, S LAv
2. Press <UP> or <DOWN> to select NStS.
3. Press <ENTER>.
The product will only respond to low frequencies of music (bass and drums).
To enable the Automatic mode:
1. Press <MODE/ESC> repeatedly until one of the following shows on the display: NASl, NAFA, NStS, SLAv
2. Press <UP> or <DOWN> to select NASl (for a slow light show) or NAFA (for a fast light show).
3. Press <ENTER>.
To select whether you want the Intimidator™ Spot LED 350 to operate with normal
panning or inverted panning, do the following.
1. Press <MODE/ESC> repeatedly until PAn shows on the display.
2. Press <UP> or <DOWN> to select normal pan operation (PAn) or inverse pan operation (r PAn).
3. Press <ENTER>.
To select whether you want the Intimidator™
or inverted tilting, do the following:
1. Press <MODE/ESC> repeatedly until tiL shows on the display .
2. Press <UP> or <DOWN> to select normal pan operation (tiL) or inverse pan operation (r tiL).
3. Press <ENTER>.
You are able to select the range for the pan and tilt angles on the Intimidator™ LED 350 to achieve the effect you like.
To select which pan angle range to use, do the follow ing.
1. Press <MODE/ESC> repeatedly until PA54 shows on the display.
2. Press <UP> or <DOWN> to select 540° (PA54), 360° (PA36), or 180° (PA18).
3. Press <ENTER>.
To select which tilt angle range to use, do the following.
1. Press <MODE/ESC> repeatedly until Ti27 shows on the display.
2. Press <UP> or <DOWN> to select 270° (Ti27), 180° (Ti18), or 90° (Ti 9).
3. Press <ENTER>.
You are able to flip the LED display for easy readability in any mounting situation. To select your display angle:
1. Press <MODE/ESC> repeatedly until diS shows on the display.
2. Press <UP> or <DOWN> to select normal display mode (diS) or inverse display mode (r diS).
3. Press <ENTER>.
Intimidator™ Spot LED 350 User Manual Rev. 8 Page 15 of 21
Master/Slave
units (the “slaves”)
te in either
et to operate in Slave
ode. Once set and connected, the slave units will operate in unison with the master
all the slave units before connecting the master unit to the DMX
Never connect a DMX controller to a DMX string configured for Master/Slave
may interfere with the signals from the

Reset Software

The product will reset all settings in the software to the default
Password
protected mode which allows you
The Master/Slave mode allows a single Intimidator™ Spot LED 350 unit (the “master”) to
Mode
Channel
control the actions of one or more Intimidator™ Spot LED 350 without the need of a DMX controller. The master unit will be set to opera Automatic or Sound-Active mode, while the slave units will be s m unit.
Configure the units as indicated below.
Slave units:
1. Press <MODE/ESC> repeatedly until SLAv shows on the display.
2. Press <ENTER> to accept.
3. Set the DMX address to 001.
4. Connect the DMX input of the first slave unit to the DMX output of the master unit.
5. Connect the DMX input of the subsequent slave units to the DMX output of the previous slave unit.
6. Finish setting and connecting all the slave units.
Master unit:
1. Set the master unit to operate in either Automatic or Sound-Active mode.
2. Make the master unit the first unit in the DMX daisy chain.
• Configure
daisy chain.
•
operation because the controller master unit.
• Do not connect more than 31 slave units to the master unit.
To reset the software on the Intimidator™ Spot LED 350, do the following:
1. Press <MODE/ESC> repeatedly until rESt shows on the display.
2. Press <ENTER>.
factory settings.
The Intimidator™ Spot LED 350 contains a password­to calibrate and troubleshoot any small issues you may have during normal operation.
In order to access this mode, do the following:
1. Press and hold <MODE/ESC> for at least 10 seconds.
2. Use the <UP> and <DOWN> buttons to enter the password: 2323.
3. Press <ENTER>.
In this mode there are several options for adjustment:
Parameter Programming Steps Description
Pan Adjust P128
Tilt Adjust t128 Gobo Wheel Adjust G128 Color Wheel Adjust C128
Focus Adjust F128 Prism Adjust L000
Lamp Brightness Adjust d000
Manually adjust the pan angle Manually adjust the tilt angle Manually adjust the gobo wheel Manually adjust the color wheel Manually adjust the focus Manually adjust the prism Manually adjust the starting
brightness of the lamp
Page 16 of 21 Intimidator™ Spot LED 350 User Manual Rev. 8
Changing
, do not remove the gobo wheel.
removing the cover on the moving head. By hand,
NOTE: If you expose the driver board, you are on the wrong side of the
and remove the cover on the
obo holder assembly away from the gobo wheel by pushing it
e gobo in place and
insert the new gobos, slide the tip of the gobo holder under the pressure
holder assembly inwards. DO NOT force the gobo holder into
side if needed to get
it to seat properly. If correctly installed, the bottom of the holder will be flush
Easy-access Panel
To change the gobos in the Intimidator™ Spot LED 350 Simply:
Gobos
1. Turn off and disconnect product from power outlet.
2. Place the product on a flat, level surface with the front facing up.
3. Access the gobo plate by gently pry up the right side, then push right with the indented handles.
head. Replace the cover immediately opposite side of the moving head.
4. Rotate the gobo wheel until the gobo that needs replacing is accessible.
5. Separate the g forward and up. Be careful not to push the gobo out of the gobo plate.
6. Extract the gobo holder by pulling it backwards out of the product.
7. On a flat surface, remove the expansion ring that holds th remove the gobo from the gobo plate.
8. Insert a new gobo and hold it in place with the expansion ring.
9. To re­plate near the center of the gobo wheel.
10. Push the gobo the gobo wheel slot. Slightly move the holder from side-to-
with the gobo wheel.
11. Push cover back into position.
Gobo Replacement Diagram
Expansion Ring
Gobo Wheel Detail Views
Gobo Holder Removal
Gobo
Gobo Holder Assembly
Intimidator™ Spot LED 350 User Manual Rev. 8 Page 17 of 21
Product
Dust build up reduces light output performance and can cause overheating. This can
To maintain optimum performance and
However,
(or dry compressed air) and a soft brush to remove dust collected on
Do not spin the cooling fan/fans using compressed air because you could damage

5. TECHNICAL INFORMATION

Maintenance
lead to reduction of the light source’s life. minimize wear, you should clean your lighting products at least twice a month. be aware that usage and environmental conditions could be contributing factors to increase the cleaning frequency.
To clean the product, follow the instructions below:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum the external surface/vents.
4. Clean all glass/transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl alcohol.
5. Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
6. Softly drag any dirt or grime to the outside of the glass/transparent surface.
7. Gently polish the glass/transparent surfaces until they are free of haze and lint.
Always dry the glass/transparent surfaces carefully after cleaning them.
it/them.
Page 18 of 21 Intimidator™ Spot LED 350 User Manual Rev. 8
Dimensions and
Length
Width
Height
Weight
10.6 in (268 mm)
13.4 in (340 mm)
15.4 in (392 mm)
22.7 lb (10.3 kg)
Note: Dimensions in inches rounded to the nearest decimal digit.
Power
Power Supply Type
Range
Voltage Selection
Switching (internal)
100–240 V, 50/60 Hz
Auto-ranging
Parameter
120 V, 60 Hz
230 V, 50 Hz
Consumption
272 W
285 W
Operating
2.2 A
1.2 A
Power linking units
3 units
7 units
Fuse
F 3 A, 250 V
F 3 A, 250 V
Power I/O
US/Worldwide
UK/Europe
Power input connector
IEC
IEC
Power output connector
Edison
IEC
Power Cord plug
Edison (US)
Local plug
Light Source
Type
Power
Lifespan
LED
75 W
50,000 hours
Color
Quantity
Current
White
1
17 A
Photo Optic
Parameter
Illuminance (12°)
9490 lx
Zoom angle
12-17°
Strobe Rate
0–20 Hz
Pan & Tilt
540°
270°
540°, 360°, 180°
Pan
270°, 180°, 90°
Tilt
1.1 mm thickness
Thermal
Maximum External Temp.
Cooling System
104 °F (40 °C)
Fan-cooled
DMX
I/O Connectors
Connector Type
Channel Range
3-pin XLR
Sockets
8, 14
Ordering
Product Name
Item Code
Item Number
Intimidator™ Spot LED 350
08010463
INTSPOTLED350

6. TECHNICAL SPECIFICATIONS

Weight
Pan/Tilt Ranges
Gobo Size
24 mm outside
20 mm image
Intimidator™ Spot LED 350 User Manual Rev. 8 Page 19 of 21
contact your distributor and follow their
instructions on how to return Chauvet products to them. Visit our website for

Returns

request a Return Merchandise Authorization (RMA) number before shipping the product. Be prepared to provide the model number, serial number, and a brief description of the cause for the
nd with its original packing
Clearly label the package with the RMA number. Chauvet will refuse any product
rite the RMA number
Before sending the product, clearly write the following information on a piece of paper
sure to pack the product properly. Any shipping damage resulting from inadequate
boxing are
To return a product or request support:
• In the U.S., contact Chauvet World Headquarters (See Contact Us).
• In the UK or Ireland, contact Chauvet Europe Ltd. (See Contact Us).
• In Mexico, contact Chauvet Mexico. (See Contact Us).
• In any other country, DO NOT contact Chauvet. Instead, contact your lighting
distributor. See www.chauvetlighting.com for distributors outside the U.S., UK, Ireland, or Mexico.
Outside the U.S., UK, Ireland, or Mexico contact details.
Call the corresponding Chauvet Technical Support office and
return. You must send the merchandise prepaid, in its original box, a
and accessories. Chauvet will not issue call tags.
returned without an RMA number.
Write the RMA number on a properly affixed label. DO NOT w directly on the box.
and place it inside the box:
• Your name
• Your address
• Your phone number
• RMA number
• A brief description of the problem
Be packaging will be your responsibility. FedEx packing or double­recommended.
Chauvet reserves the right to use its own discretion to repair or replace returned product(s).
Page 20 of 21 Intimidator™ Spot LED 350 User Manual Rev. 8

CONTACT US

WORLD HEADQUARTERS - Chauvet
General Information
Toll free: (800) 762-1084
Technical Support
World Wide Web www.chauvetlighting.com
UNITED KINGDOM AND IRELAND - Chauvet Europe Ltd.
General Information
Fax: +44 (0)1773 511110
Technical Support
MEXICO - Chauvet Mexico
General Information
Technical Support
Outside the U.S., United Kingdom, Ireland, or Mexico, contact the dealer of record and follow their instructions to request support or to return a product. Visit the Chauvet website for contact information.
Address: 5200 NW 108th Avenue Sunrise, FL 33351 Voice: (954) 577-4455 Fax: (954) 929-5560
Address: Unit 1C B rookhill Road Ind us trial Est ate Pinxton, Nottingham, UK NG16 6NT Voice: +44 (0)1773 511115
Address: Av. Santa Ana 30 Parque Ind us trial Lerma Lerma, Mexico C.P. 52000 Voice: +52 (728) 285-5000
Voice: (954) 577-4455 (Press 4) Fax: (954) 756-8015 Email: tech@chauvetlighting.com
Email: uktech@chauvetlighting.com
World Wide Web www.chauvetlighting.co.uk
Email: servicio@chauvet.com.mx
World Wide Web www.chauvet.com.mx
Intimidator™ Spot LED 350 User Manual Rev. 8 Page 21 of 21
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use